Steps to set up the BIOS of the Meijie motherboard

How to set bios on Meijie motherboard?

Take the CD-ROM installation system as an example:

1. Turn on the computer and press the DEL key to enter the bios settings.

2. Select AdvancedBIOSFeatures

3. Select BootDevlcePriority and set 1stBootDevice to the optical drive, then save and exit.

Meijie motherboard sets the BIOS like this?

First, turn on the computer and press the "Del" key to enter the motherboard bios interface when the motherboard logo is displayed. After entering, there is an English inside, where you can change the bios language and then switch to Chinese.

Then boot without entering the system and skip a lot of words to achieve diskless boot. Typical home computers will display errors. Go to the diskless settings in Advanced. Then turn off the pxe function. If you are unable to access the Internet, the network cable plug behind the motherboard will not light up. In that case, you need to set the onboard network card control and turn it on.

Finally, if you are using a mechanical hard drive and are stuck on the Windows startup interface after starting the system, please set the following item. Do not set the sata mode to AHCI, but set it to native. This should also be the case. Default mode. But if it is a solid-state drive, it must be set to AHCI, but this mode must be used after installing the driver.

How to set bios on Meijie motherboard?

The detailed settings of the Meijie motherboard BIOS are as follows:

Meijie BIOS (basically the motherboards of this model are similar). The prerequisite for setting up the optical drive startup is the optical drive or U disk optical drive mode.

Press DEL when booting to enter the BIOS, select the second one: Advanced bios Features to enter,

Then select the second one: Boot Device priority, enter and use - or the up and down keys to enter the CD -ROM is set in the front (if you use a CD-ROM with a USB flash drive, the logo of the USB flash drive will be displayed).

The third Hard Disk Drives is to choose the hard disk or U disk HDD mode to start.

The fourth CD/DVD Drives (will only be displayed if you have a CD/U disk-ROM) , select USB disk mode or CD boot. 】

How to set bios on Meijie motherboard?

1. First, insert the U disk that has been made with the U boot software into the USB interface of the computer host

(It is recommended to insert it into the USB interface at the back of the host box, which will be more convenient. (OK U disk recognition), and then turn on the computer.

When the startup screen appears, press the "del" key continuously to enter the BIOS setting main interface menu.

Enter the BIOS main menu and find and select "Hard Disk Boot"

Meijie motherboard bios detailed settings?

The detailed settings of the Meijie motherboard BIOS are as follows:

Meijie BIOS (basically the motherboards of this model are similar). The prerequisite for setting up the optical drive startup is the optical drive or U disk optical drive mode.

Press DEL when booting to enter the BIOS, select the second one: Advanced bios Features to enter,

Then select the second one: Boot Device priority, enter and use - or the up and down keys to enter the CD -ROM is set in the front (if you use a CD-ROM with a USB flash drive, the logo of the USB flash drive will be displayed).

The third Hard Disk Drives is to choose the hard disk or U disk HDD mode to start.

The fourth CD/DVD Drives (will only be displayed if you have a CD/U disk-ROM) , select USB disk mode or CD boot. 】

The above is the detailed content of Steps to set up the BIOS of the Meijie motherboard. For more information, please follow other related articles on the PHP Chinese website!