Home > Article > System Tutorial > How to set up wifi hotspot on win7 desktop computer
After opening the browser, enter the IP of the TP_LINK router in the address bar, usually 1.92168.1.1, and press Enter. You can find it in the router manual.
2 Enter the TP_LINK router login interface and enter the username and password. Generally, the initial username and password are admin.
3 After passing the password and account verification, enter the initial main interface of the TP_LINK router.
4Click "Setup Wizard" and click "Next".
5Select "PPPoE (ADSL Virtual Dial-up)" and click "Next".
6Enter the Internet account and password, and click "Next"
7Select "WPA-PSK/WPA2-PSK", enter the password and click "Next".
8TP_LINK Router setup is complete, click "Finish".
9 Click "Wireless Settings", find and open "Basic Settings", set the TP_LINK router wireless network (which is what everyone calls wifi) and save it.
10Click "Wireless Settings", find and open "Wireless Security Settings", set your TP_LINK router wireless network password and save it
Open the browser and enter 192.168.1(0)
in the address bar.1. Then press the Enter key. In the dialog box that pops up, enter the user name and password (pay attention to the router instructions), and left-click OK. Click the Setup Wizard on the left menu bar to enter the device setting interface. You can see the Setup Wizard dialog box. You need to select the Internet access type according to your network conditions. If you are not sure, you can choose to let the router automatically select the Internet access method. Then turn on the wireless function and DHCP function of the router.
2. Currently I only know one method, which is to press the connect button when booting up the computer
The first step is to right-click the small computer on the lower right to open the Network and Sharing Center
The second step is to set up a new connection or network
The third step selects the last one to set up a wireless temporary network, the next step
The fourth step is to enter the name and password. If you want to make it public, choose no authentication. If you want to encrypt, it is recommended to use wpa2, and then check before saving the network.
3. In the fourth step, it will remind you whether to enable Internet connection sharing. If you do not click it, you need to set it up in the local connection.
The fourth step is to set up internet sharing in local connection - change adapter settings_local connection (right-click properties)_sharing label_check both (the first one should select wireless network connection)_OK
At this time, left-click on the small computer in other people's computers to see the wireless signal you emitted. Once connected, you can access the Internet. By the way, if other people's networks cannot be recognized, look inside other people's computers. Have you unchecked the two check boxes at 4:1? You need to uncheck them to recognize your wireless network.
4. If you check those two options in the local connection, then the system will provide sharing for your network by default. As long as you click on the small computer every time you turn on the computer, select your network name and click Just connect the button.
Use a win7 laptop or a desktop computer equipped with a wireless network card as the host.
The host settings are as follows:
1. Run command prompt as administrator:
Use the shortcut key win R combination to open the run window → then enter cmd → press Enter (open the cmd window)
Or click Start→All Programs→Accessories→Command Prompt
2. Enable and set up the virtual WiFi network card:
Enter in the command prompt:
netsh wlan set hostednetwork mode=allow ssid=wuminPC key=wuminWiFi
After successful opening, there will be an additional wireless connection 3 with the network card "Microsoft Virtual WiFi Miniport Adapter" in the network connection. For convenience, rename it to Virtual WiFi. If not, just update the wireless network card driver and it will be OK.
4. Set up Internet connection sharing:
In the "Network Connections" window, right-click the network connection connected to the Internet, select "Properties" → "Sharing", check "Allow other... connections (N)" and select " Virtual WiFi".
5 After confirmation, the word "shared" will appear next to the icon of the network card that provides sharing, indicating that the "broadband connection" has been shared to the "virtual WiFi".
6. Turn on wireless network:
Continue running in the command prompt: netsh wlan start hostednetwork
(Change start to stop to turn off the wireless network. To enable the wireless network after booting, just run this command again)
7. At this point, the red cross of the virtual WiFi disappears, the WiFi base station has been established, and the host settings are completed. Laptops, mobile phones with WiFi modules, etc. search for the wireless network wuminPC, enter the password wuminWiFi, and you can share the Internet!
Attachment: Display wireless network information command: netsh wlan show hostednetwork
You can check the WIFI connection status through this command
PS: It has been verified in actual combat and can run perfectly. The poster asked a vague question. After reading the questions from the two people above, I realized that you want to do WIFI. I read your question once before, but I didn’t understand the question, so I didn’t answer it
The above is the detailed content of How to set up wifi hotspot on win7 desktop computer. For more information, please follow other related articles on the PHP Chinese website!