


What are the detailed steps to set up a ZTE router on a mobile phone?
How to set up ZTE router on mobile phone for details
(1) First make sure that your computer automatically obtains the network address. Check as follows.
To connect the computer and the router, first use a network cable to connect the computer's network port to the router's LAN port. Next, enter the address of 192.168.1.1 in the browser to open the login page. If you cannot open the web page, you can try to restore the router configuration to factory settings by pressing and holding the reset button on the back for 5 seconds while the router is powered on.
Use admin as the default username and password when logging in. If this is the first time you log in, the system will ask for wizard configuration. If you have enough knowledge about networking, you can choose to exit the wizard and customize the configuration, but it is usually better to follow the wizard.
(4) After entering the wizard page, click "Next" to enter the page for selecting the Internet access method.
Usually 90% of users choose to use pppoe to access the Internet. If your broadband service provider (such as China Telecom, China Unicom, China Mobile, China Railcom, etc.) provides an Internet access account and password, then you should choose the pppoe method. And if you only need to connect directly to the Internet cable to access the Internet, then you should choose the DHCP method. These two methods are commonly used by users when surfing the Internet.
(6) Select the appropriate Internet access method and enter the wireless configuration interface. The wireless network name (WiFi name) can be changed to a name that you can easily recognize, such as zhangsan, lisi-home, etc. If there is no special need for safe mode, use the default "mixed mode". Under normal circumstances, do not use "WEP" encryption method, which is easy to be cracked, and do not use "no encryption". The password length is 8 to 63 characters, and a password of more than 10 characters is sufficient. Do not use too simple passwords such as "11111111" or "12345678". After the configuration is completed, click "Next".
How to set up the mobile phone to use wireless network on ZTE’s wireless modem
1. First log in to the wireless router and change the network segment address of the wireless router to 192.168.2.1;
2. Connect a network cable from the LAN port of the optical modem to the WAN port of the wireless router, and then connect a network cable from the LAN port of the wireless router to the computer (if you are debugging a laptop or mobile phone, you can directly connect to the wireless router through a wireless signal set up);
3. Open the browser, enter the wireless router login address and management user name and password (for the wireless router login address and management user name and password, please refer to the instructions on the label on the back of the wireless router), confirm, and enter the wireless router setting interface. ;
4. Setup wizard, select the PPPOE dialing method, next step, enter the Internet account and password, next step, set the wireless network name after the SSID, enter at least 8 digits of the wireless network password after the PSK, next step;
5. Save and restart the wireless router according to the prompts to complete the installation of the wireless router
How to set up ZTE ZXV10 H608B router to achieve wireless network connection
Setting up ZTE ZXV10 H608B router wireless method:
[Home network environment wiring]:
1. There is a modem: modem ---- router wan port; router lan port ---- computer.
2. No modem: network cable----router wan port; router lan port----computer.
[Computer enters the router]:
1. Computer IP and DNS settings are automatically obtained.
2. Open the browser and enter 192.168.1.1 in the address bar (usually the router address is this or check the login information on the back of the router). Enter routing - enter the user name and password (the default is usually admin).
【Set Router Dial-up】:
1. In the [Setup Wizard], select [PPPoE Dial-up] (some are ADSL dial-up), follow the prompts to enter the username and password for Internet access, and save.
2. In [Network Parameters]--[WAN Settings], select [Normal Mode], and in the three options of [Connection], select [PPPoE Dial-up]. The next step is to select [Automatic Connection], save and exit.
[Turn on the wireless function of the router]
1. Select Wireless Settings---Basic Settings.
2. Check [Turn on wireless function] and click Save.
【Set wifi password】
1. Wireless Settings--Wireless Security Settings--Select [WPA-PSK/WPA2-PSK].
①. Authentication type: automatic.
②. Encryption algorithm: AES.
③. The PSK password is the wireless password. Set the required password.
The above is the detailed content of What are the detailed steps to set up a ZTE router on a mobile phone?. For more information, please follow other related articles on the PHP Chinese website!

You may encounter the “this build of Vanguard is out of compliance” issue when attempting to launch Valorant on Windows 11. Why does the error message appear? How to get rid of the error message? This post from php.cn gives details.

NVIDIA GeForce RTX 40 series GPU might not be a new thing to you. Compared with other top graphics cards, many of you may pay more attention to mid-end mainstream RTX 4050 for its acceptable price. Read through this guide from php.cn Website to get d

KB2267602 is a protection or definition update for Windows Defender designed to fix vulnerabilities and threats in Windows. Some users reported that they were unable to install KB2267602. This post from php.cn introduces how to fix the “KB2267602 fai

Do you know how to reinstall pre-installed software in Windows 11 if you need to do this? In this post, we will introduce two easy ways. In addition, if you want to recover files on your Windows computer, you can try php.cn Power Data Recovery.

Windows Desktop or File Explorer or folder will automatically refresh itself when you make some changes to it. However, some Windows 11/10 users report that they encounter the “desktop and file folders do not refresh automatically” issue. This post f

When you try to install a program on Windows 11/10, you may fail to install it and receive an error message - there is a problem with this Windows installer package. This post from php.cn helps you to fix it.

When you run antivirus software on your device, you likely expect it to scan all files and folders for viruses. However, one question arises: can antivirus scan encrypted files? This inquiry delves into the realm of security versus privacy. php.cn So

How to download HDMI video drivers on Windows? How to update HDMI drivers to the latest versions. You can find the ways here. In addition, you can try php.cn Power Data Recovery to get your lost and deleted files back if necessary.


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Dreamweaver Mac version
Visual web development tools

SublimeText3 English version
Recommended: Win version, supports code prompts!

Notepad++7.3.1
Easy-to-use and free code editor

Atom editor mac version download
The most popular open source editor

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.