Home >Computer Tutorials >Troubleshooting >The optical drive is not recognized by Windows?

The optical drive is not recognized by Windows?

WBOY
WBOYforward
2024-01-17 18:15:342080browse

The optical drive is not recognized by Windows?

Windows can’t read the disc in the drive?

The inability to read the disc may be caused by a damaged drive or damaged disc. I suggest you first try to check if there is something wrong inside the drive, and then try putting the disc on another computer to test and see if it can't be read either.

Windows cannot read the disc in the drive?

If Windows cannot read the disc in the drive, it may be because the optical drive device is not installed correctly. First, open the device manager and check whether the optical drive device is normal. If there is a problem, you can try to update the driver or reinstall the driver. If the driver is installed normally, you can try to check whether the CD-ROM drive is connected correctly, or try changing a new CD-ROM.

Windows cannot read the disc in drive h?

1. There are many possibilities for this problem. First, please check the hardware device manager in the right-click properties of my computer to see if there is a driver for the DVD/CD-ROM drive. If there is no driver, there is Little question mark.

Secondly, if there is no problem with the driver, please right-click on My Computer to open the CD-ROM drive. It is not open during playback. If it still cannot be opened, it means that the system is faulty. Please repair the system or reinstall the system.

Third, it can be opened as in the previous step but cannot be played directly. Usually, double-clicking will play the CD by default instead of opening the CD, which means the problem is not serious. You can open the CD and copy the desired content.

Windows cannot read Take the disc from drive d?

Answer: The solution is as follows

1. Please first confirm whether this CD can be read in other computers, and pay attention to whether there are scratches on it. If there are scratches, If there are scratches, it will not be read by an optical drive with poor disk reading ability. If the scratches are severe, it will not be read by any optical drive.

2. If there is no problem with the CD itself, you can also try reinstalling the CD-ROM driver. You can right-click the computer (XP is My Computer), select Manage, right-click the optical drive device in the Device Manager, select Uninstall, then click the Scan for hardware changes button in the toolbar, or restart the computer.

It may be that the CD-ROM drive’s reading ability has decreased. You can try to find out if there is a special cleaning disc on the market. And if cleaning is ineffective and you don’t have the ability to do it yourself, if you can adjust the optical drive laser head appropriately, and if you often use the optical drive, it is recommended to replace it.

Windows7 cannot read the disc in the drive?

When inserting a CD in Windows 7 system, sometimes it will show that it cannot be recognized or cannot be opened. After some searches, the cause of the problem is caused by a function of Windows. Enabling this function may cause the system to be unable to browse and open. The CD directory can only load auto-run programs or automatically play media files. Only disabling this function can solve the problem.

Press the keyboard key combination "Win R" to open "Run" and enter "Services.msc" to confirm.

2. Then find "Service" Shell Hardware Detection.

3. Double-click this service, set the "Startup Type" to "Disabled", and click the "Stop" button below.

Can't read the disc in the drive?

1. Press the "Win R" key combination on the keyboard to open the "Run" window. Enter "Services.msc" and click "OK" to open the local service manager.

2. You can also click "Control Panel" - "System and Security" - "Administrative Tools" - "Services" to open the local service manager.

3. Find the following service: "Shell Hardware Detection" (provides notification for automatic playback of hardware events).

4. Double-click the "Shell Hardware Detection" service and set the "Startup Type" to "Disabled".

5. Just click "Stop" below. This solves the problem that Windows cannot read the CD in drive G:\.

Windows cannot read the disc in the drive. Please format it first?

There is nothing after formatting, there should be something wrong with the CD

Why is Windows unable to read the CD in the drive?

Answer: The most likely reason why Windows cannot read the disc in the drive is that the drive door is open or the disc is not the fastest. If you receive this error, check the following items: Make sure the audio disc is not in the drive.

Windows cannot read the drive?

Method 1: Re-plug the USB port and try

1. The cause of "Cannot find drive device driver" may be that there is a problem with the USB port. At this time, you can choose to replug and unplug the USB port and try.

Method 2: Try another USB port

1. There may be a problem with this USB port alone. You can choose another USB port and retry the win7 installation to see if there is still a prompt that the device driver is not installed. . Because this prompt will appear at the usb3.0 interface! Changing to USB2.0 interface may solve the problem!

Method three: "circuit" installation method

1. When the installation interface appears, do not click "Install Now"! Click "Repair your computer".

2. Then open the command control line, enter setup.exe and press Enter to continue the installation.

Method 4: Try changing the USB disk brand

1. After actual testing, it is true that some USB flash drive models are prone to causing this problem. You can try to use other USB flash drives to re-create the Win7 Ultimate system boot disk, and then try the installation again.

Windows cannot read the disc when burning a disc?

1. Check whether the selected optical drive (recorder) is wrong. If there are two optical drives (recorders) on the computer and the wrong selection is made, this prompt will appear.

2. If the selected burner is correct, check whether there is any problem with the disc. First, whether the disc is of the corresponding category for the burner. For example, if a DVD disc is put into a CD burner; CD disks are not acceptable. Secondly, if there is no error in the CD, the quality of the CD must be considered to be poor. You can change a few more disks, or try a different brand.

3. The inserted disc has been burned, has data on it, or is a waste disc that failed to be burned, etc. This prompt will appear when the recorder cannot detect the disc or the detected disc does not meet the burning requirements.

4. If your recorder does not support burning R disk, this prompt will also appear when you insert the R disk. In short, the recorder will prompt because it does not detect a suitable and available disc.

5. If the performance of the recorder (optical drive) decreases and the disc cannot be found when selecting a disc, the same prompt will appear.

The above is the detailed content of The optical drive is not recognized by Windows?. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:xtzjcz.com. If there is any infringement, please contact admin@php.cn delete