Home >Database >Mysql Tutorial >How to improve InnoDB performance by 55% for write-bound loa_MySQL

How to improve InnoDB performance by 55% for write-bound loa_MySQL

WBOY
WBOYOriginal
2016-06-01 13:13:221341browse

During April’s Percona Live MySQL Conference and Expo 2014, I attended atalkon MySQL 5.7 performance an scalability given by Dimitri Kravtchuk, the Oracle MySQL benchmark specialist. He mentioned at some point that the InnoDB double write buffer was a real performance killer. For the ones that don’t know what the innodb double write buffer is, it is a disk buffer were pages are written before being written to the actual data file. Upon restart, pages in the double write buffer are rewritten to their data files if complete. This is to avoid data file corruption with half written pages. I knew it has an impact on performance, on ZFS since it is transactional I always disable it, but I never realized how important the performance impact could be. Back from PLMCE, a friend had dropped home a Dell R320 server, asking me to setup the OS and test it. How best to test a new server than to run benchmarks on it, so here we go!

ZFS is not the only transactional filesystem, ext4, with the option “data=journal”, can also be transactional. So, the question is: is it better to have the InnoDB double write buffer enabled or to use the ext4 transaction log. Also, if this is better, how does it compare with xfs, the filesystem I use to propose but which do not support transactions.

Methodology

The goal is to stress the double write buffer so the load has to be write intensive. The server has a simple mirror of two 7.2k rpm drives. There is no controller write cache and the drives write caches are disabled. I decided to use the Perconatpcc-mysqlbenchmark tool and with 200 warehouses, the total dataset size was around 18G, fitting all within the Innodb buffer pool (server has 24GB). Here’re the relevant part of the my.cnf:

innodb_read_io_threads=4innodb_write_io_threads=8#To stress the double write bufferinnodb_buffer_pool_size=20Ginnodb_buffer_pool_load_at_startup=ONinnodb_log_file_size = 32M #Small log files, more page flushinnodb_log_files_in_group=2innodb_file_per_table=1innodb_log_buffer_size=8Minnodb_flush_method=O_DIRECTinnodb_flush_log_at_trx_commit=0skip-innodb_doublewrite#commented or not depending on test

innodb_read_io_threads=4

innodb_write_io_threads=8  #To stress the double write buffer

innodb_buffer_pool_size=20G

innodb_buffer_pool_load_at_startup=ON

innodb_log_file_size=32M#Small log files, more page flush

innodb_log_files_in_group=2

innodb_file_per_table=1

innodb_log_buffer_size=8M

innodb_flush_method=O_DIRECT

innodb_flush_log_at_trx_commit=0

skip-innodb_doublewrite  #commented or not depending on test  

So, I generated the dataset for 200 warehouses, added they keys but not the foreign key constraints, loaded all that in the buffer pool with a few queries and dumped the buffer pool. Then, with MySQL stopped, I did a file level backup to a different partition. I used the MySQL 5.6.16 version that comes with Ubuntu 14.04, at the time Percona server was not available for 14.04. Each benchmark followed this procedure:

  1. Stop mysql
  2. umount /var/lib/mysql
  3. comment or uncomment skip-innodb_doublewrite in my.cnf
  4. mount /var/lib/mysql with specific options
  5. copy the reference backup to /var/lib/mysql
  6. Start mysql and wait for the buffer pool load to complete
  7. start tpcc from another server

The tpcc_start I used it the following:

./tpcc_start -h10.2.2.247 -P3306 -dtpcc -utpcc -ptpcc -w200 -c32 -r300 -l3600 -i60

./tpcc_start-h10.2.2.247-P3306-dtpcc-utpcc-ptpcc-w200-c32-r300-l3600-i60

I used 32 connections, let the tool run for 300s of warm up, enough to reach a steady level of dirty pages, and then, I let the benchmark run for one hour, reporting results every minute.

Results

Test: Double write buffer File system options Average NOPTM over 1h
ext4_dw Yes rw 690
ext4_dionolock_dw Yes rw,dioread_nolock 668
ext4_nodw No rw 1107
ext4trx_nodw No rw,data=journal 1066
xfs_dw Yes xfs rw,noatime 754

So, from the above table, the first test I did was the common ext4 with the Innodb double write buffer enabled and it yielded 690 new order transactions per minute (NOTPM). Reading theext4 doc, I also wanted to try the “dioread_nolock” setting that is supposed to reduce mutex contention and this time, I got slightly less 668 NOTPM. The difference is within the measurement error and isn’t significant. Removing the Innodb double write buffer, although unsafe, boosted the throughput to 1107 NOTPM, a 60% increase! Wow, indeed the double write buffer has a huge impact. But what is the impact of asking the file system to replace the innodb double write buffer? Surprisingly, the performance level is only slightly lower at 1066 NOTPM and vmstat did report twice the amount writes. I needed to redo the tests a few times to convince myself. Getting a 55% increase in performance with the same hardware is not common except when some trivial configuration errors are made. Finally, I used to propose xfs with the Innodb double write buffer enabled to customers, that’s about 10% higher than ext4 with the Innodb double write buffer, close to what I was expecting. The graphic below presents the numbers in a more visual form.

TPCC NOTPM for various configurations

TPCC NOTPM for various configurations

In term of performance stability, you’ll find below a graphic of the per minute NOTPM output for three of the tests, ext4 non-transactional with the double write buffer, ext4 transactional without the double write buffer and xfs with the double write buffer. The dispersion is qualitatively similar for all three. The values presented above are just the averages of those data sets.

TPCC NOTPM evolution over time

TPCC NOTPM evolution over time

Safety

Innodb data corruption is not fun and removing the innodb double write buffer is a bit scary. In order to be sure it is safe, I executed the following procedure ten times:

  1. Start mysql and wait for recovery and for the buffer pool load to complete
  2. Check the error log for no corruption
  3. start tpcc from another server
  4. After about 10 minutes, physically unplug the server
  5. Plug back and restart the server

I observed no corruption. I was still a bit preoccupied, what if the test is wrong? I removed the “data=journal” mount option and did a new run. I got corruption the first time. So given what the procedure I followed and the number of crash tests, I think it is reasonable to assume it is safe to replace the InnoDB double write buffer by the ext4 transactional journal.

I also looked at the kernel ext4 sources and changelog. Up to recently, before kernel 3.2, O_DIRECT wasn’t supported with data=journal and MySQL would have issued a warning in the error log. Now, with recent kernels, O_DIRECT is mapped to O_DSYNC and O_DIRECT is faked, always for data=journal, which is exactly what is needed. Indeed, I tried “innodb_flush_method = O_DSYNC” and found the same results. With older kernels Istronglyadvise to use the “innodb_flush_method = O_DSYNC” setting to make sure files are opened is a way that will cause them to be transactional for ext4. As always, test thoroughfully, I only tested on Ubuntu 14.04.

Impacts on MyISAM

Since we are no longer really using O_DIRECT, even if set in my.cnf, the OS file cache will be used for InnoDB data. If the database is only using InnoDB that’s not a big deal but if MyISAM is significantly used, that may cause performance issues since MyISAM relies on the OS file cache so be warned.

Fast SSDs

If you have a SSD setup that doesn’t offer a transactional file system like the FusionIO directFS, a very interesting setup would be to mix spinning drives and SSDs. For example, let’s suppose we have a mirror of spinning drives handled by a raid controller with a write cache (and a BBU) and an SSD storage on a PCIe card. To reduce the write load to the SSD, we could send the file system journal to the spinning drives using the “journal_path=path” or “journal_dev=devnum” options of ext4. The raid controller write cache would do an awesome job at merging the write operations for the file system journal and the amount of write operations going to the SSD would be cut by half. I don’t have access to such a setup but it seems very promising performance wise.

Conclusion

Like ZFS, ext4 can be transactional and replacing the InnoDB double write buffer with the file system transaction journal yield a 55% increase in performance for write intensive workload. Performance gains are also expected for SSD and mixed spinning/SSD configurations.

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn