Why does my computer have a blue screen every time I turn it on?

Why does my computer have a blue screen every time I turn it on

Are you talking about a code blue screen or a boot blue screen counting 100-0? Could you please tell me more?

1) Boot code blue screen

Immediately after booting up, press and hold the F8 key until the advanced options appear and let go. Then select "Last Known Good Configuration" and press Enter to fix it. If the problem persists, press F8 again to enter safe mode and try to restore the system or reinstall the system. If you still encounter the blue screen problem after reinstallation, it is recommended to perform maintenance.

Such problems are caused by software conflicts, inappropriate drivers, and system problems. You can restore the system in safe mode. If it still doesn't work, reinstall the operating system. Do not install software, patches, drivers, etc., and see if there are still problems when booting. ? If you are not installing drivers, patches, and software step by step, don't install anything that is inappropriate.

For problems caused by hardware, you can try the following methods to troubleshoot: remove the motherboard battery and plug it in again, unplug and insert the memory and graphics card, clean the dust, and check whether there is any problem with the hard disk. If the problem is not resolved, please perform maintenance.

2) The blue screen counts when booting up: 100-0

This is a disk problem. Please repair it (repair each disk).

The system’s own disk repair method:

The following are the specific steps: Select the drive letter in My Computer and right-click the mouse, select "Tools" in the pop-up drive properties window, and then click "Start Check". Next, select "Automatically fix file system errors" and "Scan and recover bad sectors" and finally click Start. Please note that scan times will vary depending on disk capacity and scan options. After completing the above steps, a box will pop up, click Yes. At this time, the computer will automatically shut down and repair operations will be performed after turning it on.

Bad sectors on the hard disk will cause the computer system files to be damaged or lost, and the computer will be unable to start or crash. Bad sectors on the hard disk can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (if it still doesn't work, format the hard drive, repartition it, and reinstall it. If that doesn't work, replace the hard drive or do some maintenance).

If there is no illegal shutdown and there is no problem with the hard disk, and the system still scans when it is turned on, you can use the following method to remove the system from scanning the hard disk:

Click "Start/Run", enter "regedit" and press Enter to open the registry editor, select the "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager" subkey in sequence, and then find "BootExecute" in the right window Clear the key value items and their value data, and then restart (select the file export for backup before clearing, so that you can restore the backup if needed).

My computer shows a blue screen when I turn it on!

Hello, this is the solution to the blue screen when the computer starts up: (original, please indicate the author of the quote: Liwang History)

1. Try booting, after checking out the computer brand, press F8, Enter, Enter, enter safe mode, Advanced Startup

option, last known correct configuration, press Enter, press Enter and try!

2. If that doesn't work, enter safe mode, start normally, press Enter, go to the desktop, and do a full anti-virus!

3. Use: 360 system first aid kit, repair, select all, repair immediately! Network repair, one-click repair!

Click again: Check and kill! After restarting, click on "Isolate|Recover", select them all, and delete them completely!

4. If that doesn't work, unplug the graphics card and memory module, wipe them with an eraser, and then use a brush to clean the dust from the slots and the fan,

Replace memory slots, etc.!

5. If that doesn't work, download "Drive Life" and upgrade: graphics card driver!

6. Turn on the computer again. If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

7. There is a problem with the hardware, send it for repair!

The above is the detailed content of Why does my computer have a blue screen every time I turn it on?. For more information, please follow other related articles on the PHP Chinese website!