Explore the causes of computer failure 711

What’s going on with computer failure 711

711The general meaning of this error code is: Because the remote server cannot be connected

It is very likely that the error "651" has occurred before. Finally, after processing 651,

Due to some improper operations, the appearance of 711

(1) First, let us open the "cat box" and run the machine. When we enter the desktop, we have to find a folder in the C drive. The steps are: c:/windows/system32/Logfiles/ to This is the first step. You can see a folder named "WMI" in this folder. Don't rush to open it first. Right-click on it, and then click "Administrator takes ownership". After that, you will find that a Run the program in DOS for a short time, and then restart decisively. Without this step, you will not be able to proceed with the following steps;

After the restart is completed, we can log in to the client again. After connecting to the network, turn on the computer, right-click, select "Manage", then select "Applications and Services", "Services". Find the Secure Socket Tunneling Protocol Service in the service list and check whether its status is normal. If you encounter error code 711, it roughly means that it is due to an inability to connect to the remote server.

It is very likely that the error "651" has occurred before. Finally, after processing 651,

Due to some improper operations, the appearance of 711

(1) First, let us open the "cat box" and run the machine. When we enter the desktop, we have to find a folder in the C drive. The steps are: c:/windows/system32/Logfiles/ to This is the first step. You can see a folder named "WMI" in this folder. Don't rush to open it first. Right-click on it, and then click "Administrator takes ownership". After that, you will find that a Run the program in DOS for a short time, and then restart decisively. Without this step, you will not be able to proceed with the following steps;

(2) After the restart is completed, we find that we can log in to the client again. After connecting to the network, we right-click on "Computer" and find "Management", followed by "Applications and Services", "Services", and find Secure Socket Tunneling Protocol service, right-click it, change the startup type to "automatic", not "automatic delay", click OK, if there is one in the upper left corner, or right-click it and find "start" If the option is available, be sure to click Start.

(3) After completing the second step, still find the file named "Remote Access Auto Connection Manager" in the system tree, and repeat the "second step" procedure we just talked about.

(4) Complete the third step, and finally find the file "Remote Access Connection Manager", and then repeat the second step. If you find any step that does not require clicking "Open", you can omit it.

At this point, shut down and then restart the machine to test whether our method has completely solved your problem.

Tips: It is recommended not to close the "cat box" in advance before the machine is completely shut down in the future to avoid causing system chaos in WIN7 itself, which is not stable

What’s wrong with 711 on your computer

The "Error 711: Cannot Load Remote Access Service Connection Manager" error message appears when you create a network connection

reason

This issue may occur if the following services are disabled: • Telephone Service

• Remote Access Connection Manager

• Remote Access Automatic Connection Manager

solution

To resolve this issue, enable these disabled services, and then start them: 1. Click Start, right-click My Computer, and then click Manage.

2. Double-click "Services and Applications" and then double-click "Services".

3. Right-click Telephone Services, and then click Properties.

4. On the General tab, click Manual next to Startup Type.

5. On the General tab, click Start under Service Status, and then click OK.

6. Repeat steps 3 through 5 for Remote Access Connection Manager and Remote Access Automatic Connection Manager respectively.

What is the problem with computer 711

Computer error code 711 refers to: The configuration error on the computer cannot connect to the network

The solution steps are as follows:

1. Open the "Computer" "C:WindowsSystem32LogFiles" folder, right-click and select "Properties";

2. Click the "Security" option and select "Advanced";

3. Click the "Owner" option and select "Edit";

4. Select the currently used account "aaa" and click OK;

5. Click "OK" in the pop-up option box;

6. Click "Start Menu", right-click "Computer" and select "Manage" to go to step seven;

7. Select the "Service" option;

8. Find the service "Remote Access Auto Connection ManagerRemote", right-click and select "Start";

9. Confirm that the service "Access Connection Manager" is turned on. If it is not turned on, right-click and select "Start";

10. Confirm that the service "Telephony" is turned on. If it is not turned on, right-click and select "Start";

11. Obtain the permissions of the "C:WindowsSystem32LogFiles" folder and ensure that all the above services are turned on to solve the broadband dial-up 711 error.

The computer cannot connect to the Internet error code 711

711 This error code means: The remote server cannot be connected. Cause: It is very likely that the error "651" has occurred before. Finally, when 651 was processed, 711 appeared due to some improper operations.

Approach:

1. Open the "Cat Box", run the machine, and when you enter the desktop, find a folder in the C drive: c:/windows/system32/Logfiles/WMI folder. Don't rush to open it first. After right-clicking on it and then clicking "Administrator takes ownership", a short DOS running program will appear. After the running is completed, restart the computer;

2. After the restart is completed, log in to the client again. After connecting to the network, right-click "Computer" and find "Management", followed by "Applications and Services", "Services", find the Secure Socket Tunneling Protocolservice, and Right-click, change the startup type to "Automatic" and click OK. If there is one in the upper left corner, or if you still right-click it and find that there is a "Startup" option to choose from, be sure to click Start.

3. Find the file named "Remote Access AutoConnection Manager" in the system tree and repeat the procedure in step 2.

4. After completion, find the "Remote Access ConnectionManager" file, then repeat the method in step 2, and then restart the computer.

Tips: It is recommended not to close the "cat box" in advance before the machine is completely shut down in the future to avoid causing system chaos in WIN7 itself, which is not stable.

The above is the detailed content of Explore the causes of computer failure 711. For more information, please follow other related articles on the PHP Chinese website!