How to solve application errors when starting the computer

What to do if an application error occurs when starting the computer

Application error, please take the following measures to solve your problem

The memory module is broken--replace the memory module

Dual memory is not compatible - use the same brand of memory or only use one memory

Heat dissipation problem--Enhancing heat dissipation inside the chassis

Driver problem--reinstall the driver. If it is a new system, you must first install the motherboard driver. If the software is damaged - reinstall the software. If the software has bugs - patch it or use the latest version. The software is incompatible with the system - patch the software or try the system's compatibility mode

If you encounter conflict issues while using the software, there are several possible solutions you can try. First, if you recently installed new software, try uninstalling it and see if the problem is resolved. Sometimes, new software may be incompatible with existing software, causing conflicts. Secondly, if the software requires the use of other related software and problems occur, you can try to reinstall the related software. Sometimes, due to errors during installation or other reasons, related software may not work properly, causing conflicts. Third, if your computer is infected by a virus, the antivirus software may conflict with the system or other software. This is because anti-virus software needs to enter the underlying monitoring system and may be incompatible with some software. In this case, you can try to uninstall the current anti-virus software and replace it with an anti-virus software with better compatibility, such as Kingsoft Antivirus 2011 version sp6. Finally, this problem often occurs on Windows 2000 and XP systems. This is because Windows 2000/XP has higher hardware requirements. Once a resource deadlock, overflow or illegal operation similar to Windows 98 occurs, the above situation will occur in order to maintain system stability. Hope the above solutions will be helpful to you. Please note that these are just suggestions and specific solutions may vary based on individual circumstances. If the problem persists, it is recommended that you consult professional technical support.

Why does an application error occur when the computer is turned on?

1) Press F8 immediately after booting, or press F8 until the advanced options appear before booting. Release your hand, use the up and down keys to select safe mode and press Enter. Enter safe mode and use software to kill Trojans. Uninstall before the accident occurs. All things installed, including games, restore the system or reinstall the system (if you can enter safe mode, it means you have installed inappropriate things, uninstall all inappropriate things downloaded before the accident, and you may have been hit by a Trojan horse. Use software to check and kill Trojans. If it doesn't work, restore the system or reinstall it. If you can enter the normal mode, follow the above method in the normal mode).

2) If the above method cannot solve the problem, first use software and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there are still problems when booting? If you are not installing drivers, patches, and software step by step, don't install anything that is inappropriate.

Please note: If you install drivers, patches, software and other things after restoring the system or reinstalling, be sure not to install the things that affected your accident, otherwise the restoration or reinstallation will be in vain.

3) Whether there are any problems with hardware, such as hard disk, memory, graphics card, motherboard, etc. If it is caused by hardware problems, it is recommended to check them.

4) If you have any questions, please ask me.

Why does my computer say that application 0 xc0000135 failed when opening some programs? Please order

1. The computer runs slowly or cannot shut down properly

Enter msconfig in the start menu and press Enter. In the startup menu, remove all checkmarks (except ctfmon), save, and try restarting (it can speed up the startup speed). Generally, you have too much startup or file conflict. question

Install 360 Security Guard, press F8 all the time when booting the computer to enter the safe mode to check and kill. Now nine out of ten viruses on the Internet are Trojans, so anti-virus software cannot detect the virus. It is recommended to install 360 to check and kill

The heat dissipation is not good. Reinstall the CPU heat sink. If there is poor contact, you can replace the CPU fan

2. A crash is usually caused by running too many software, or the computer has poor heat dissipation and is too hot. Replace the CPU fan.

Enter msconfig in the start menu and press Enter. In the startup menu, remove all checkmarks (except ctfmon), save, and try restarting (it can speed up the startup speed). Generally, you have too much startup or file conflict. question

Install 360 Security Guard, press F8 all the time when booting the computer to enter the safe mode to check and kill. Now nine out of ten viruses on the Internet are Trojans, so anti-virus software cannot detect the virus. It is recommended to install 360 to check and kill

The heat dissipation is not good. Reinstall the CPU heat sink. If the contact is bad, you can replace the CPU fan

3. The blue screen is usually caused by the CPU being too hot, dust, viruses, or the hard disk having bad sectors

Enter msconfig in the start menu and press Enter. In the startup menu, remove all checkmarks (except ctfmon), save, and try restarting (it can speed up the startup speed). Generally, you have too much startup or file conflict. question

Install 360 Security Guard, press F8 all the time when booting the computer to enter the safe mode to check and kill. Now nine out of ten viruses on the Internet are Trojans, so anti-virus software cannot detect the virus. It is recommended to install 360 to check and kill

The heat dissipation is not good, reinstall the CPU heat sink, the contact may be poor, you can replace the CPU fan

If you find a hard disk crashing sound and then a blue screen, it means the hard disk has bad sectors

4. Restart for no reason, usually because the CPU is too hot, virus, dust, bad power supply, bad memory, too hot graphics card, bad motherboard capacitor

Enter msconfig in the start menu and press Enter. In the startup menu, remove all checkmarks (except ctfmon), save, and try restarting (it can speed up the startup speed). Generally, you have too much startup or file conflict. question

Install 360 Security Guard, press F8 all the time when booting the computer to enter the safe mode to check and kill. Now nine out of ten viruses on the Internet are Trojans, so anti-virus software cannot detect the virus. It is recommended to install 360 to check and kill

The heat dissipation is not good. Reinstall the CPU heat sink. If the contact is bad, you can replace the CPU fan

Reinsert and unplug the graphics card and memory card. The most important thing is to clean the dust near the CPU and memory. This is the easiest way

Or try changing a power supply (check your power supply, sometimes the voltage is unstable)

Your computer capacitor may be bursting. Check to see if a few of the capacitors near your computer's CPU (capacitors that stand upright like small buckets) are bulging. Normal ones should be flat. Find a few yourself. Weld the capacitor of the same model and replace it or have it repaired

The department has been repaired

5. The computer screen is black and cannot be turned on

Generally, it is necessary to re-insert and unplug the graphics card and memory card. The most important thing is to clean the dust near the CPU and memory. This is the easiest way

6. An error occurred halfway through booting up

Write down the wrong file name, enter regedit in the start menu and press Enter, open the registry, look for the wrong name (such as: splus.dll), delete all found key values, and restart the computer.

Or run in the start menu, enter msconfig and press Enter, remove all checkmarks (except ctfmon) in the startup menu, save and restart (this can also speed up the startup of the computer)

7, half of the computer starts with a black screen

Press F8 to enter safe mode after booting, delete the graphics card driver, restart, and reinstall the graphics card driver

Or enter the safe mode start menu and run, type msconfig and press Enter. Remove all checkmarks (except ctfmon) in the startup and save and restart. (This can also speed up the startup of the computer)

Reinstall the system

8.The computer automatically shuts down

Enter msconfig in the start menu and press Enter. In the startup menu, remove all checkmarks (except ctfmon), save, and try restarting (it can speed up the startup speed). Generally, you have too much startup or file conflict. question

Install 360 Security Guard, press F8 all the time when booting the computer to enter the safe mode to check and kill. Now nine out of ten viruses on the Internet are Trojans, so anti-virus software cannot detect the virus. It is recommended to install 360 to check and kill

The heat dissipation is not good, reinstall the CPU heat sink, the contact may be poor, you can replace the CPU fan

Or try changing a power supply (check your power supply, sometimes the voltage is unstable)

Your computer capacitor may be bursting. Check to see if a few of the capacitors near your computer's CPU (capacitors that stand upright like small buckets) are bulging. Normal ones should be flat. Find a few yourself. Solder the capacitor of the same model and replace it or take it to the repair department

Repaired

Why do I get application errors when opening everything on my computer?

Memory cannot be read or written error solution

Manual repair system service

If an error occurs in the Windows Management Instrumentation service related to system memory read and write operations, it will also cause the system to pop up a memory read and write error message. Therefore, when we encounter this error phenomenon, we can try to manually repair Windows Management Instrumentation service, the following are the specific repair steps:

First, right-click the "My Computer" icon on the system desktop, execute the "Management" command from the pop-up shortcut menu, open the computer management window of the local system, and display the area on the left side of the window. Expand the "Services and Applications"/"Services" option in turn, find the Windows Management Instrumentation service in the right display area where the corresponding "Service" option is located, and right-click the service option with the mouse, and execute it from the pop-up shortcut menu "Properties" command opens the service property setting interface;

Secondly, in the "General" tab page of the setting interface, click the "Stop" button to temporarily stop the Windows Management Instrumentation service. After that, open the resource manager window of the computer system, expand the "Windows", "system32", "wbem", and "repository" folders in this window, and then back up all the files in the "repository" folder window. , clear all contents in the folder after the backup is completed;

Next, restart the computer system. After the system starts successfully, open the property setting interface of the Windows Management Instrumentation service according to the previous operation, and click the "Start" button in the interface. I believe that the Windows Management Instrumentation service will be activated in this way. It will run normally.

Repair damaged system files

If the computer system is accidentally infected with a virus or accidentally deleted, the system files related to the system memory read and write operations are likely to be damaged. Once these system files are damaged, we will easily encounter memory problems. Read and write failure prompts. Therefore, once we encounter a memory read and write error prompt, we might as well follow the following steps to repair the system and see if there are any damaged files in the system:

First use the latest version of anti-virus software to conduct a thorough virus scan and killing operation on the computer system, because once the computer system is infected with a virus and is not removed, even if we repair the system files, the virus may still continue to damage it. System files, so use anti-virus software in time to remove all viruses from your computer to ensure that system files will not continue to be threatened by viruses.

Secondly use the "sfc" command that comes with the system to try to repair the damaged system files to a normal state. When repairing damaged system files, just enter "CMD" during operation, open the "Command Prompt" window, enter the string command "sfc/scannow", and click the Enter key, the command program will System files in every corner of the system are searched and scanned. Once it is found that the version of the system file is incorrect or the system file has been damaged, it will automatically pop up a prompt interface asking us to insert the installation CD of the Windows system in order to extract the normal system from it. files to replace abnormal system files, thereby achieving the purpose of repairing system files. If the system repair operation is successful, I believe we will not see any abnormal phenomena when we restart the computer system.

Release system memory in time

We know that when running some large-capacity programs or games, a considerable amount of system memory resources need to be consumed. If the memory space is not enough at this time, then a system memory read and write error fault message is likely to occur. In order to effectively avoid this error message, we'd better restart the computer system before running a large-capacity program or game, so as to fully release the system memory space; if the computer memory space itself is relatively small, , then we recommend that you upgrade your memory in time to expand the effective use of memory and prevent system memory read and write errors caused by insufficient system memory

The above is the detailed content of How to solve application errors when starting the computer. For more information, please follow other related articles on the PHP Chinese website!