The software cannot be started problem occurs after booting

The software cannot be opened after the computer is turned on

From what you said, I feel there may be the following questions:

1. Your startup software is in conflict.

It is recommended not to install two or more anti-virus software. It is common for anti-virus software to kill each other and then freeze. Do not set 2 or more optimization software to start automatically at boot. Optimization software is popular and there is a possibility of making mistakes.

2. There are too many startup softwares, which occupy a lot of memory.

Start-(in Search Programs and Files) type msconfig-start to cancel unnecessary startup items.

3. System problem

Some pirated systems will have some problems. Generally, after installing the system, you need to disinfect it and then back it up. Just restore it when it's bad.

4. Suspended Death State

A computer is just a machine. No matter how well configured it is, don’t expect it to make no mistakes. Sometimes you have to learn to accept it even if it takes a minute to open a document. Let it catch its breath. No matter how hard you work every day, you need to take a break.

5. Trojan horse, virus

This can be checked and killed, but I think it is easier to do it after restoring the system. The prerequisite is that you back up useful data first.

Application error occurs after turning on the computer

Analysis: The system cannot run normally, and a program error is prompted as soon as it is turned on. This is usually caused by software or hardware failure. The reasons are many and complex. It may be that the system file is damaged, it may be a virus infection, or it may be There are too many background self-starting programs or multiple security software installations causing the system to freeze. It may also be a problem with the memory, hard disk or motherboard.

Suggestion: Check one by one according to the principle of starting from easy to difficult, software first and then hardware.

1. Restart the computer. If you can enter the system normally, it means that the last abnormality was just an occasional program or system operation error and does not matter.

2. If you frequently cannot enter the system normally, press F8 immediately after turning on the computer to see if you can enter the safe mode or the last correct configuration mode. If you can, enter and exit, and then restart and you should be able to enter the normal mode. If you have security software, you can use 360 ​​Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software in safe mode to scan and kill all Trojans and viruses.

3. If not, press F11 after restarting to see if there is a one-click GHOST, and if so, restore it with one click (one-click backup was required before).

4. If there is no one-click restore, use the system U disk to reinstall the system. After inserting the USB disk, turn on the computer and press the DEL key (usually F2 on a laptop or according to the prompts on the bottom line of the screen) to enter CMOS, enter the BOOT tab and set the USB disk as the first boot item. Restart and enter the USB boot menu, select Clone Installation, and then follow the prompts.

The steps to create a system U disk and reinstall the system are:

1). Make a boot USB flash drive: Go to a physical store to buy a 4-8G USB flash drive (you can ask your boss to help you make a system USB flash drive and you can omit the following steps), search online and download Laomaotao or Chinese cabbage, etc. Start the U disk creation tool, insert the U disk into the computer and run this software to create a bootable U disk.

2). Copy system files: Go online to the System Home website to download the GHO file of operating systems such as WINXP or WIN7, and copy it to a U disk or the U disk folder specified by the startup tool.

3). Set the USB disk as the first boot disk: Press the DEL key when turning on the computer (usually F2 or other for laptops) to enter the BIOS setting interface, enter the BOOT tab to set the USB disk as the first boot item (Note: Some computers require At this time, insert the USB flash drive for recognition before setting).

4). U disk boot and reinstall the system: Insert the U disk to start the computer, enter the U disk startup interface and follow the prompts to use the downloaded GHO file to clone and install.

5. If you have a system CD (if not, you can go to a computer store to buy it for 5-10 yuan), insert the system CD into the CD-ROM drive, and press the DEL key after turning on the computer (usually F2 for notebooks or follow the prompts on the bottom line of the screen) to enter CMOS, and set the optical drive (CD-ROM or DVD-ROM) as the first boot item in the BOOT tab. Restart and enter the CD boot menu, select to install the system to Area C, and then follow the prompts.

6. If the above operations are ineffective, you need to replace and check the memory, motherboard, hard disk and other hardware one by one to determine the source of the fault.

No software can be opened after the computer is turned on

1) Slow boot or stuck:

Do not operate immediately after booting, because the program is being loaded when booting. You will try the operation after a while. If it takes too long, see the method below.

Disconnect the network cable and try to turn on the computer. If there is no problem, it is caused by slow startup and network connection. It has nothing to do with the system (if it is a network problem, try setting a fixed IP).

If it is not caused by slow Internet connection, first soft and then hard. Such problems are caused by software conflicts, inappropriate drivers, and system problems. You can restore the system. If it still doesn't work, reinstall the operating system. Do not install software, patches, or Wait for the driver and see if there is still a problem with booting? If you are not installing drivers, patches, and software step by step, do not install anything that is inappropriate (if it is a hardware problem, please check it, such as the hard disk, etc.).

2) If it always happens like this, reinstall the operating system first with software and then with hardware. Do not install software, patches, drivers, etc. and see if there is still any problem when booting? If you are not installing drivers, patches, and software step by step, don't install anything that is inappropriate (please ask me if you have any questions).

Please note: If you install drivers, patches, software and other things after restoring the system or reinstalling, be sure not to install the things that affected your accident, otherwise the restoration or reinstallation will be in vain.

3) In terms of hardware, whether there are problems with the hard disk, memory, etc., and whether the temperature of the CPU and other hardware is high. If it is caused by hardware problems, it is recommended to check them.

What should I do if the computer always prompts that the application cannot be started when it is turned on?

The application cannot start normally because the related files have been damaged or mistakenly deleted. Sometimes multiple software with similar or identical functions conflict with each other and cannot start normally.

At this time, you can clean up and uninstall excess files. If it still doesn't work, restart the system.

【Extension】

How to clean up computer C drive:

Solution to insufficient space on C drive. Start downloading software or files from now on. Do not put them on C drive. Follow the steps below to free up a lot of space.

1. Move the virtual memory to a non-system disk.

2. Transfer the IE temporary files to a non-system disk, open the settings in IE Tools/Interner Options/Interner Temporary Files/select the moved path, click OK to apply, and restart.

3. If there is not enough space, move some software to the non-system disk. If there is enough space, do not download software or files to the C drive in the future. Just use Super Rabbit to clean up the system garbage in time (select Clean up system junk, it will be done in one minute, it is thorough and safe).

The above is the detailed content of The software cannot be started problem occurs after booting. For more information, please follow other related articles on the PHP Chinese website!