U disk system installation flow chart illustration

In modern society, with the continuous development of technology, more and more people are beginning to use U disks to install systems. The U disk installation system has the advantages of convenience, speed, and removableness, and has become the first choice of many people. This article will introduce you to the steps of installing the system from a USB flash drive and provide some practical tools and materials.

Tools and raw materials:

In order to successfully use the USB disk to install the system, we need to prepare the following tools and raw materials:

1. 1. Computer: used for system installation and operation.

2. A USB flash drive: used to store system installation files and start the system.

3. System installation files: The latest system installation files can be downloaded from the official website or other trusted channels.

4. U disk creation tools: You can use some professional U disk creation tools, such as Rufus, UltraISO, etc.

1. Preparation work

Before starting to install the system from USB disk, we need to do some preparation work:

1. Determine the system version: according to your own needs and computer configuration , select the appropriate system version.

2. Check the computer configuration: Make sure the computer hardware configuration meets the minimum requirements of the selected system.

3. Back up important data: Before installing the system, be sure to back up important personal data to avoid loss.

2. Make a U disk boot disk

1. Download and install the U disk creation tool: Select the appropriate U disk creation tool according to your needs, and download and install it.

2. Open the U disk creation tool: run the installed U disk creation tool and select the U disk to be created.

3. Import the system installation file: In the U disk creation tool, select to import the system installation file and write it to the U disk.

4. Set the U disk as the startup disk: In the U disk creation tool, set the U disk as the startup disk so that the system can be booted from the U disk.

3. Install the system

1. Insert the U disk and restart the computer: Insert the prepared U disk into the computer and restart the computer.

2. Enter BIOS setup: During the computer restart process, press the corresponding button to enter the BIOS setup interface.

3. Set the U disk as the startup item: In the BIOS setting interface, set the U disk as the first startup item.

4. Save the settings and restart: After saving the settings, exit the BIOS setup interface and the computer will automatically restart.

5. Start installing the system: Follow the prompts on the system installation interface to install and set up the system.

Summary:

Through the above steps, we can successfully use the U disk to install the system. The USB disk installation system has the advantages of convenience, speed, and removability, and is suitable for various scenarios and needs. I hope this article will be helpful to everyone and you can successfully complete the operation of installing the system from the USB flash drive.

The above is the detailed content of U disk system installation flow chart illustration. For more information, please follow other related articles on the PHP Chinese website!