After my wireless connection is connected, it shows that this hotspot cannot access the Internet. What is the problem?
Open your computer's Network and Sharing Center, click Change Adapter Settings, then right-click your network connection (usually a broadband connection or local area connection) and select Properties. In the properties window, select Sharing Options and check the first option. Next, select the virtual adapter you created, usually Wireless Network Connection 2. After completing the above steps, try to connect your phone and most of the problems can be solved. Please make sure that the virtual adapter you are sharing has an Internet connection.
The wireless network card device is abnormal
1,
Make sure the computer’s wireless network card is turned on. First, you can use the Fn hotkey combination or physical switch to turn on the wireless network card. At the same time, make sure that the driver and device status of the wireless network card are normal. Next, open the "Control Panel", click "Network and Internet" and enter the "View network status and tasks" option. Here, select "Set up a new connection or network" and then "Manually connect to a wireless network." In the pop-up window, fill in the network name, security type, security key and other information. Click Next, then click OK to complete the addition. After the setting is completed, start the wireless network connection again to check whether it is normal.
2,
If the above method does not work, you can try the following method: right-click the "My Computer" icon, select "Manage", then select "Services and Applications", and then select "Services". Find "WLAN" in the service list and perform the corresponding operations. Please be careful not to exceed 69 words in your answer.
Autoconfig", right-click the menu and select "Properties", set the "Startup Type" to "Manual", and "Confirm".
Why is it that after turning on the hotspot on a mobile phone, others can connect but cannot access the Internet?
When others cannot access the Internet after connecting to the mobile hotspot, it is usually due to incorrect password input or incorrect WiFi settings. At this time, the mobile phone with the hotspot turned on can solve the problem by resetting the password, allowing the mobile phone connected to the hotspot to forget the hotspot WiFi first, then reconnect and re-enter the password. If the issue is due to a phone setup issue, simply restarting both phones will resolve it.
The way to turn on the mobile hotspot is through the following steps: First, open the settings menu of the mobile phone. Then, select the "Connections" option and then go to the "Tethering and Portable Hotspot" settings. On this page, click on the "Portable WLAN Hotspot" option. Next, tap "Settings" to configure the hotspot. In the pop-up window, select an SSID you want, which is the name used to search the network, and set a password. Finally, turn on the hotspot function and you can share your traffic with others for free.
Hotspot refers to a device that allows wifi-enabled devices (such as laptops and tablets) to connect to a mobile phone through wifi and use the mobile phone's 3G or GPRS network to access the Internet. During use, the mobile phone's Internet traffic will be consumed, and the fees will be charged by each operator. This software does not charge any fees.
3. The method is to first open the settings on the phone, and then click on Wireless and Networks.
4. Then click "Binding and Portable Hotspot".
5. Turn on the portable wifi hotspot to turn on the hotspot on your phone.
Why can’t I set up a wireless network and share it with others but still can’t access the Internet through my wireless network?
◆ Wireless Internet settings for two laptops: The most convenient method is to use the newly added network bridge function in Windows XP system.
Required accessories include: two laptops, one network cable, and ADSL MODEM.
First, we need to connect a network cable to the MODEM, and set the IP address of the host's wireless network adapter to 192.168.1.1 and the subnet mask to 255.255.255.0. Then right-click "My Network Places", select "Properties" to enter the "Wireless Network Connection Properties" page, select "Wireless Network Configuration", and modify the name of the "SSID". Then select Advanced, set Networks to access to Computer-to-computer only, and turn off the Automatically connect to non-preferred networks option.
Second, we need to make corresponding settings for the laptop and network settings for another laptop. First, set the IP of the wireless network adapter to 192.168.1.2 and the subnet mask to 255.255. 255.0, then right-click "My Network Places" and select the "Properties" page, select "Wireless Network Connection Properties", then select "Wireless Network Configuration", and add the SSID of the wireless network adapter of the host notebook in "Preferred Network". Open the "Advanced" page, set "Networks to access" to "Computer-to-computer only", and turn off the corresponding "Automatically connect to non-preferred networks" option. (The above two-step setting method is for Windows XP/VISTA operating system)
◆How to set up wireless Internet access for laptops through wireless AP
Before setting up wireless Internet access on a laptop, you need to prepare the hardware conditions: two laptops, another desktop computer, wireless AP with routing function, ADSL MODEM. The operation method is as follows:
First, set up the wireless network node. The function of the wireless network node is to convert the signal of the wired network into a wireless signal. One thing to be reminded here is that it is recommended to choose a location that is not easily blocked and where the signal can cover all corners of the house. After checking the manual of the wireless network node, you can learn the IP address of the AP. Generally, the IP address of the AP is 192.168.1.1 and the subnet mask is 255.255.255.0. In the network properties, set the IP address of the laptop wireless network adapter to 192.168.1.100 and the subnet mask to 255.255.255.0 to keep it in the same network segment as the wireless network node.
Second, after opening the wireless network node, the wireless network adapter will automatically search for the wireless network node. Then we open the IE browser and enter in the address bar, enter the account number and password of the corresponding factory device, and after correct input, you can enter the management interface of the wireless network node.
Third, in the management interface of this wireless network node, what we need to do is to set the IP address of the IP wireless network node to static or dynamic. What needs to be explained here is that joining is home broadband Internet access, so the broadband access method IP is dynamic, so the IP address of the wireless network node is set to dynamic acquisition, otherwise set to static.
Fourth, connect the broadband access network cable to the wireless network node, and then set the IP address of the laptop's wireless network adapter to automatically obtain, or keep it in the same network segment as the wireless network node. After the operation, complete the wireless Internet settings on your laptop, but before going online, it is recommended that you enter the security options interface and set the corresponding password to encrypt and protect the current network and prevent others from secretly using your network bandwidth.
Hope it can help you~~hehe
They are all for win7, I hope you find them useful
What should I do if my mobile phone is connected to wifi but cannot access the Internet?
The reasons why the mobile phone is connected to wifi but cannot access the Internet are:
1. There is a problem with the WiFi itself. The WiFi may not be connected properly, resulting in the inability to access the Internet;
2. Router problem, the router may be overheated or damaged;
3. The broadband may be in arrears, resulting in inability to access the Internet;
4. The WiFi name contains Chinese characters, causing some mobile phones to be unable to connect to the Internet;
5. There is a problem with the mobile phone system. There may be a problem with the system, causing the WiFi to be connected but unable to access the Internet.
Suggested solutions:
1. Use another mobile phone or device to connect to WiFi and try to see if you can access the Internet to eliminate problems with the WiFi itself;
2. Try restarting the router, or restore the router to factory settings, then dial-up to access the Internet again, and reset WiFi according to the setup wizard, or replace with a new router and then dial-up to connect to the Internet;
3. Contact the broadband customer service to confirm whether there is any abnormality in the broadband account. If there is arrears, recharge the broadband, and then try dial-up connection;
4. If the WiFi name contains Chinese characters, it is recommended to change it to English or a combination of English and numbers before connecting;
5. If the above reasons are eliminated, it is very likely that there is a problem with the mobile phone system. It is recommended to restore the factory settings or flash the phone to see if the problem can be solved.
The above is the detailed content of Why does my wireless connection say I can't get online?. For more information, please follow other related articles on the PHP Chinese website!

This article provides practical tips for maintaining ENE SYS systems. It addresses common issues like overheating and data corruption, offering preventative measures such as regular cleaning, backups, and software updates. A tailored maintenance s

This article addresses the Windows "INVALID_DATA_ACCESS_TRAP" (0x00000004) error, a critical BSOD. It explores common causes like faulty drivers, hardware malfunctions (RAM, hard drive), software conflicts, overclocking, and malware. Trou

Article discusses editing Windows Registry, precautions, backup methods, and potential issues from incorrect edits. Main issue: risks of system instability and data loss from improper changes.

Article discusses managing Windows services for system health, including starting, stopping, restarting services, and best practices for stability.

What does the drive health warning in Windows Settings mean and what should you do when you receive the disk warning? Read this php.cn tutorial to get step-by-step instructions to cope with this situation.

This article identifies five common pitfalls in ENE SYS implementation: insufficient planning, inadequate user training, improper data migration, neglecting security, and insufficient testing. These errors can lead to project delays, system failures

This article identifies ene.sys as a Realtek High Definition Audio driver component. It details its function in managing audio hardware, emphasizing its crucial role in audio functionality. The article also guides users on verifying its legitimacy

This article addresses the failure of the Windows asio.sys audio driver. Common causes include corrupted system files, hardware/driver incompatibility, software conflicts, registry issues, and malware. Troubleshooting involves SFC scans, driver upda


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Safe Exam Browser
Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.

SecLists
SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.

SublimeText3 Mac version
God-level code editing software (SublimeText3)

ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment

SublimeText3 English version
Recommended: Win version, supports code prompts!
