The gray network icon in the lower right corner of win7 cannot be found and is not selectable

The network icon in the lower right corner of win7 has disappeared and is gray and unselectable

To start running, type gpedit.msc and press Enter. Open the Group Policy Editor, select User Configuration/Administrative Templates/Start Menu and Taskbar, double-click the "Delete Network Icon" option on the right, and select the unconfigured button in the box that opens. Confirm (or press the Microsoft icon key and R key on the keyboard to open Run).

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test. If it is a problem with the broadband, contact broadband customer service to solve it.

2) If it is a problem with the router, if it used to work, it cannot be used temporarily. My own practice is to cut off the power of the router, plug it in, and wait and see. If you have it, just restore the factory settings and re-set it and it will work (this is on the premise that the physical connection is correct, sometimes it is caused by the router being slow or failing to find an IP address, and it does not mean that the router is broken).

If you still can't solve it, it is recommended to call the customer service of the router. They have online guidance by phone. I encountered a problem that I couldn't solve. It is very useful to consult their suggestions. They will help you with your settings or operations. Gives correct advice.

3) If you turn off the wireless switch, just turn it on. If you use software to connect wirelessly, it is normal that the software is not easy to use and often causes problems. If there is no better way, use a router. In addition, it is caused by the lack of or inappropriate network card driver, whether there is a problem with the network cable interface or the network cable, etc.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

How to solve the problem that the network cannot connect and the TCPIP protocol turns gray

Cannot connect to the network

. At the same time,

in the local link

TCP/IP protocol is gray

1. Use the registry to set

step 1,

Start running regedit.exe, open the registry editor, and delete the following two keys:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

Step 2,

Use Notepad to open the %winroot%\inf\nettcpip.inf file and find: [MS_TCPIP.PrimaryInstall]Characteristics = 0xa0

Step 3,

Open the TCP/IP properties of the local connection---add protocol. Browse the disk and find the %winroot%\inf\nettcpip.inf file you just saved, and then select the TCP/IP protocol. After this step, return to the network connection. window, but at this time, the uninstall button is already available. Click the uninstall button to delete the TCP/IP protocol, and then restart the machine.

Step 4,

After restarting, follow step 3 and reinstall the TCP/IP protocol.

Step 5,

Restart again. It should be OK now. You can set the IP address as needed.

2. Use commands to set

In this case, if TCP/IP needs to be reinstalled to restore the TCP/IP stack to its original state. You can use NetShell utilities to reset the TCP/IP stack to the state it was in when the operating system was first installed. The specific operations are as follows:

step 1,

Click Start --Run, enter CMD and click OK;

Step 2,

Enter the command in command line mode; Netsh Int Ip Reset C:\resetlog.txt

The above is the detailed content of The gray network icon in the lower right corner of win7 cannot be found and is not selectable. For more information, please follow other related articles on the PHP Chinese website!