Simple operation, two methods to easily flash your iPhone, suitable for novices!

You can try the following steps to flash and downgrade to other iOS systems supported by iPhone: 1. First, make sure your iPhone is connected to your computer and the latest version of iTunes is installed. 2. Open iTunes and select your iPhone device. 3. On the device page, click the Summary tab, and then click the Check for Updates button. 4. If downgraded firmware is available, iTunes will prompt you to update. Click the "Download and Update" button and wait for the download to complete. 5. After the download is complete, iTunes will start installing the downgraded firmware. Please wait patiently until the installation is completed. 6. After the installation is complete, your iPhone will restart and run the downgraded iOS system. Please note that flashing and downgrading may result in data loss and may violate the device's warranty. Before flashing or downgrading, be sure to back up your important data and make sure you understand the possible risks and consequences. In addition, flashing and downgrading may also have legal and security issues. Please operate in compliance with relevant laws and regulations.

The repair shop stated that your iPhone has encountered a serious iOS system failure and needs to be repaired by flashing it. They proposed this restoration operation and would charge hundreds of oceans for it.

Some beginners may feel that the flashing process is too complicated, and incorrect operation can easily cause the phone to become bricked, so they dare not try it.

In fact, whether you do it by yourself or in a repair shop, the risks are the same. What you need to pay attention to is the key points of the flashing operation to avoid bricking.

Flashing an iPhone is a very simple operation. Usually, as long as it is an ordinary iOS system failure, there is no need to go to a mobile phone store for repair. Even a novice can easily repair it at home.

Today, the editor will introduce 2 commonly used flashing tools, along with the corresponding operating method tutorials and flashing precautions. Save them for emergencies!

1. iTunes Apple Flashing

The iTunes flashing operation is relatively complicated and divided into two situations. The specific operations are as follows:

Step 1: Start the latest version of iTunes that has been installed , connect iPhone/iPad and other Apple devices to the computer with a data cable. Next, there are two situations:

Scenario 1: If iTunes can directly identify the device, then in the upper left corner of the software interface, you will see the phone icon that has successfully identified the device. Click on the icon to start the next step.

In the device information details interface, click the "Restore iPhone" function key, and then follow the prompts on the interface to enter the flashing process.

Situation 2: If iTunes cannot directly recognize the device, you need to manually enter the iPhone into recovery mode or DFU mode.

When the software is recognized, an option box will pop up with two options: "Update" and "Restore". You only need to click on the "Restore" option to enter the flashing process. This option can help you restore the original settings of your device, allowing you to start the flashing process again. So, if you want to start flashing again, just click on the "Recover" option.

The second step is to confirm the precautions for the recovery operation. In this step, you need to download the firmware on the software side. You can click the download button in the upper right corner to view the download progress of the firmware.

If you want to flash other firmware that Apple has opened the verification channel, you can directly click the shift recovery key in the previous step and select the firmware you have downloaded.

Step 3: After the firmware download or import is completed, the software will start the "restore" iPhone operation by default. At this time, wait patiently for the flashing process on the iTunes side and Apple device side to complete. That’s it.

2. Tool flashing

For novices, flashing the phone may make them feel that the operation is complicated, so they dare not try to operate it by themselves. However, there are some easy-to-operate and safer flash software that can help them solve this problem. Do you want to know what software is available? Here are some recommended flash software: 1. KingoRoot: This is a simple and easy-to-use rooting tool that supports a variety of Android phone brands and models. Just connect your phone to the computer and follow the instructions of the software to complete the flashing process. 2. Odin: This is a flashing tool for Samsung phones, which provides a safe and stable way to flash your phone. Users simply connect their phone to their computer and use the Odin software to flash ROM files or other system files. 3. TWRP Recovery: This is a very popular flashing software that provides users with a visual interface to make the flashing process easier and more intuitive. With TWRP Recovery, users can select and install custom ROMs, backup and restore systems, and more. 4. Magisk: This is a powerful flash tool that can help users achieve Root permissions and install various modules. Magisk has the function of hiding Root permissions, allowing users to enjoy Root permissions while maintaining the integrity of the system. The above are some recommendations for easy-to-operate and safer flash software. I hope it can help you. But please note that before using any flashing tool, be sure to back up important data and read the relevant tutorials and precautions carefully. Flashing the machine has certain risks, so be careful when operating.

Learn about repair tools!

The Apple mobile phone repair tool is called a novice design because it has the characteristics of one-click operation and can be flashed in just 3 simple steps.

This tool provides two repair modes, namely "Standard" and "Deep". It is mainly used to repair iOS system failures and can easily solve more than 150 iOS device system problems. Whether it is a white screen, black screen, frequent restarts, stuck in recovery mode, failed updates, or inability to boot, you can use this tool to fix it. In addition, it also supports flashing operations, providing users with more choices.

Operation Guide:

Step 1: Download and open the Apple phone repair tool, connect your iPhone to the computer using a data cable, and click "Start".

Step 2: Select the repair mode, giving priority to "Standard Repair" to avoid losing device data.

The third step is to click "Download Firmware" and wait for the firmware download to complete. After the download is complete, you can start the flashing operation. Just follow the flashing process until it's complete.

If the device only has basic iOS system problems such as white apples and stuck in recovery mode, you can first use the "standard repair" mode to repair the system without flashing. Losing device data, the success rate is about 80%!

3. Precautions for flashing your phone

For flashing your phone, an important point to note is that if you are a novice, it is recommended that you understand and become familiar with the flashing operation process before operating. This is because flashing may cause your phone to become bricked, which means it becomes unusable. Therefore, in order to avoid this situation from happening, it is recommended that novices be fully prepared and understand before performing flash operations. Only in this way can you better protect your phone and successfully complete the flashing process.

2. During the flashing process, be careful not to use the device at will or forcefully terminate the flashing process;

3. Before flashing, make sure you know your Apple ID account and password to avoid problems after flashing. Activation Lock device cannot be used.

The above is the detailed content of Simple operation, two methods to easily flash your iPhone, suitable for novices!. For more information, please follow other related articles on the PHP Chinese website!