How to solve the problem of silent headphones after turning on the computer

This article will talk about how to always use headphones when booting macOS, and what to know about the sound of Mac headphones when there is no sound. I hope it will be helpful to you. Don’t forget to bookmark this site. Today I would like to share with you the knowledge of always using headphones when booting macOS. It will also explain the sound of mac headphones but no sound. If it happens to solve the problem you are facing now, don’t forget to pay attention to this site and start now!

What should I do if the computer shows no sound from the headphone device when it is turned on?

First, we need to check the connection status of the audio device. On a computer, we want to make sure that audio devices (such as speakers or headphones) are properly connected to the appropriate jacks. Pay attention to whether the jack is plugged into the correct one to avoid incorrect connection resulting in failure to produce sound properly. Also make sure the audio device is powered on so it can work properly. In this way, we can enjoy a high-quality audio experience.

2. It may be that the headphones are not fully inserted into the computer audio interface. Re-insert them and confirm whether there is sound. It may be that the headset has the wrong audio interface (plugged into the microphone interface). Change the interface and plug it in again to confirm. It may be that the audio interface driver is not installed on the computer. You can use the driver software to update the driver again to solve the problem.

First of all, we need to check the headset to make sure it is working properly and not damaged. If the headset is normal, then we can insert it into the headphone jack. Next, open your computer’s Control Panel and click on the “Hardware and Sound” option. Here, we need to find and click "Realtek High Definition Audio Manager" to enter.

4. The sound card driver is not updated or installed. The headphone jack panel is debugged incorrectly or is disabled. Solution: Check the sound card driver, right-click this computer - click Manage. Then select Device Manager on the left.

Why after dual-system installation on Mac, there is no startup sound when Win7 is turned on, but there is a sound when wearing headphones. Please beg...

According to the poster's description, he encountered a problem when using the Windows 7 operating system. He said he found some drivers online and downloaded them using software. He thought the problem might be caused by the driver.

Possible reasons: The sound card driver is not installed or has failed, causing the sound card to not work. The sound card hardware is damaged and cannot be used anymore. Solution: Use the driver software to reinstall the sound card driver. If the hardware is damaged, it can only be sent for repair. Do not force it to be dismantled or repaired. It is best to find customer service to solve the problem.

Cause: The system is set to mute. The sound service is not started. The sound card driver is abnormal. Solution: If you are installing win7, you should know that when creating a system and making a flash disk in bootcamp under mac, there is a check mark "Download the latest driver for windows".

Please check whether the earphones are properly checked first. Apple's headphone jack is tight. Check again to see if Apple's hardware driver is installed. If you use bootcamp to install a dual system, after installation, insert the mac osx installation disk, open the bootcamp folder on the disk, and click install to install the necessary drivers.

My computer is also the latest model of macbook pro. Had this problem too. If you know there is no sound in win7 system, I can teach you. You first click Start, then click All Programs. There is one called Apple Software Update, you click on it. will be updated. It will be fine after the update.

Why does the iPhone 6 always appear in headphone mode?

It may be caused by the failure of the micro switch, that is, the headset has been pulled out, but the switch is not turned off in time . Headphone mode is automatically switched. When the earphones are plugged in, there will be this earphone mark. The iPhone 6 is a mobile phone launched by Apple on September 9, 2014, and was officially launched on September 19, 2014.

It may be that when the earphones are plugged into the phone, a point inside the phone is worn out. If it does not jump up, it is the headphone mode, and when it jumps up, it is the mobile phone mode.

This situation is usually caused by hardware or software problems with the phone. What are the possible reasons why Apple 6sp is in headphone mode for no reason? Dust or moisture gets into the headphone jack, causing the phone to mistakenly think headphones are plugged in. The headphone jack has poor contact, causing the phone to be unable to detect the plug and unplug state.

This situation should be caused by the failure of the micro switch, that is, the headset has been pulled out, but the switch was not turned off in time. You can try quickly unplugging and plugging in the headphones several times to see if the logo disappears. If that doesn't work, you should change the headphone jack. Headphone mode is automatically switched.

Solution to the problem that the volume of iPhone 6 suddenly changes to headphone mode: Unplugging the headphones still cannot release the headphone mode of the phone. You can plug the headphones back into the phone, and then slowly unplug them to see if the headphone mode can be released. . Try turning off the phone and then restarting it to see if the headphone mode can be released.

The laptop must be powered on with headphones plugged in, and then unplugged after powering on, so that the computer's speakers can have sound. How...

1. In this case, it is recommended to right-click My Computer--Manage --Device Management--Sound Game Video Controller--Sound Card Driver Uninstallation. Download the driver wizard or driver life--open the software--detect the driver--install the sound card driver--shut down and restart.

2. You can check whether the sound card driver is not installed properly or there is a conflict that causes the sound card to not work. Also, are you using the interface on the front panel of the host or the one on the back? If it's from the back, just follow the ***** above.

3. There is a problem with the front audio interface on the motherboard or there is a problem with your own front interface, usually due to poor contact. Use an audio extension cable ($5 each) to connect to the audio port on the back.

4. Try changing the audio item HD to AC97 in the motherboard BIOS settings. It is also possible that due to the installation of some optimization software, the detection and indication functions of the sound card are directly disabled at startup. It is recommended that you uninstall the optimization software, re-download the sound card driver, install it and then restart the computer. Generally, it can be restored. Good luck. .

5. Therefore, when the laptop detects the headphones when it is turned on, it stops outputting sound first. After re-inserting, it will trigger the computer's judgment. The computer's judgment is controlled by humans, so it can output sound again. This is similar to how the movie on the iPad pauses immediately after unplugging the headphones, out of privacy and humane considerations.

6. First, make sure there is no problem with the hardware. If there is no problem with the speaker and the sound card, and if you have tested it on other machines and it is indeed in good condition, then you can continue reading. Make sure all connections are correct. Then power on the speaker and turn on the volume switch.

What should I do if my Apple phone has no sound and always displays the headphone mode?

1. If there is no sound after the Apple phone enters the headphone mode, you can first check whether there is dust or dirt in the headphone jack, and try to restart the phone or Upgrade the system. If the problem still exists, it is recommended to go to Apple's official after-sales service center for maintenance or replacement of accessories.

2. Restart the phone or plug and unplug the headset several times quickly until the headset mode is released. Use a cotton swab dipped in alcohol and rotate it to wipe the headphone plug and mobile phone jack to prevent oxidation of the plug or jack.

3. Select automatic or long press the power button to directly shut down the Apple phone and restart it. Check headphones etc. If using wired headphones, check if they are plugged in properly. If using wireless headphones, reconnect or replace the battery.

Apple tablet always appears in headphone mode?

1. Method 2: Restart iPad. If checking the headphone jack does not solve the problem, you can try restarting iPad. Press and hold the iPad's Power and Home buttons until the Apple logo appears, then release the buttons. Wait for the iPad to restart and check again to see if it exits headphone mode.

2. It may also be caused by moisture in the headphone jack or foreign matter in the headphone jack. If there is foreign matter in the headphone jack, you need to take it to the after-sales service to remove the foreign matter inside. Solution to the problem that the iPad displays the headphone mode without plugging in the headphones: shut down completely after listening to the headphones, unplug the headphones and restart the phone to give it a try.

3. Entering the headphone mode: It may be caused by the failure of the microswitch of the headphone jack, or it may be caused by water and moisture entering the headphone jack. Try the following operations to solve the problem. If the problem cannot be solved, it is recommended to get after-sales inspection, repair or replace the headphone jack. 1] Restart the tablet or plug and unplug the headphones quickly several times until the headphone mode is released.

4. This is because there is a small sensor inside the iPad’s headphone jack that can detect whether headphones are inserted. If this sensor is faulty or dust gets into the headphone jack, it may cause your iPad to display headphone mode.

Do I need to set the headset every time the computer is turned on?

The default function is set when the computer is turned on. The Bluetooth function is enabled by default when the computer is turned on, so every time Win7 is turned on, the Bluetooth connection is turned on. If you don't want it, you can turn it off. In the start menu, find Control Panel - Hardware and Sound - Bluetooth Devices, and put the Bluetooth card on Can be unchecked.

In this case, it is recommended to right-click My Computer--Manage--Device Management--Sound Game Video Controller--Uninstall the sound card driver. Download the driver wizard or driver life--open the software--detect the driver--install the sound card driver--shut down and restart.

Follow the following steps to set it up. Leiyin physical two-channel, virtual one. Razer has a virtual multi-channel software called Razer Surround. As long as this software is installed, the two-channel headphones will be virtual 1.

My win11 can switch and save, but every time I switch to headphones, I have to restart the system before the headphones can have sound.

Check whether there is any metal piece misalignment in the jack, and use a ballpoint pen to correct it. Right-click the speaker in the lower right corner--Audio Device--Double-click the speaker--Enable this device.

Bluetooth can connect multiple devices, overcoming the problem of data synchronization. Today Bluetooth is managed by the Bluetooth Special Interest Group (SIG). The Bluetooth Technology Alliance has more than 25,000 member companies around the world, which are distributed in multiple fields such as telecommunications, computers, networks, and consumer electronics.

This is the end of the introduction about the problem that the earphones always have sound when macos is turned on, and the mac earphones have no sound. I wonder if you have found the information you need? If you want to know more about this, remember to bookmark and follow this site. That’s it for the introduction of always using headphones when booting up macOS. Thank you for taking the time to read the content of this website. For more information about whether the sound is played out by mac headphones but not, and whether the headphones always work when booting up macos, don’t forget to search on this website. .

The above is the detailed content of How to solve the problem of silent headphones after turning on the computer. For more information, please follow other related articles on the PHP Chinese website!