Solve the problem that win10 cannot be started due to failed update

Many users who use win10 have encountered the situation where the update failed and the computer cannot be turned on. In fact, this may not only be a problem with the system, but also a problem with the hardware. Let’s take a look at the detailed solution below. Method.

What to do if the win10 update fails and the computer cannot be turned on:

Method 1:
1. Press and hold the power to force shutdown and restart more than three times to enter the "System Menu" and click "Troubleshooting".

2. Click "Startup Settings" in "Troubleshooting".

3. Press "F4~F6" to enter safe mode with one click.

4. After entering, press "Win R" to open the run input msconfig.

5. Click "General", select "Diagnostic Startup", and click "OK" to restart.

Method 2:

1. First check the monitor problem. You can unplug the monitor’s data cable and only connect the power cord. If it shows no signal There is no problem with the display.

2. Disassemble the machine, find the memory module on the motherboard, open the buckles on both sides, and remove the memory module. Use an eraser to wipe the gold finger, reinstall it and try to turn it on.

If there is another memory stick, you can replace it and try to boot.

If there is no problem, use the same method to detect the graphics card problem.

3. You can try to connect the hard disk to another interface and wait a few minutes before turning it on again

The above is the detailed content of Solve the problem that win10 cannot be started due to failed update. For more information, please follow other related articles on the PHP Chinese website!