Home  >  Article  >  Computer Tutorials  >  How to output block graphics in 2012CAd

How to output block graphics in 2012CAd

PHPz
PHPzforward
2024-01-03 14:42:071360browse

1. In 2012CAD, the detailed steps for outputting block graphics are as follows:

  1. 1. Open the CAD software: Start AutoCAD 2012 , make sure you are using that version.

  2. 2. Open or create a drawing: Open a drawing that contains block graphics, or create a new drawing.

  3. 3. Locate block graphics: Use the command INSERT or I to select the block graphics to be output. You can also create a new block using the command B (block).

  4. 4. Set block properties: If you selected an existing block, check the properties of the block, such as scaling factor, rotation angle, etc., to make sure they match the output Require.

  5. 5. Open layout or model space: Switch to the layout or model space in which you want to output block graphics.

  6. 6. Insert block graphics: Use the command INSERT or I to select or insert the block you want to output. graphics.

  7. 7. Adjust the block graphic position: Use the move command (MOVE or M) to adjust the block graphic position , make sure it's where you want it.

  8. 8. Set printing parameters: Enter the print settings (PLOT or PRINT), select the printer and paper size , printing range and other parameters. Make sure you select the print settings appropriate for the output of block graphics.

  9. 9. Preview printing: Use the PREVIEW command to view the printing effect and ensure that the position and proportion of the block graphics are correct.

  10. 10. Execute printing: After confirming that the printing settings are correct, use the PLOT or PRINT command to execute printing. Output block graphics to paper or file.

2. Text example: Case demonstration

In AutoCAD 2012, to output block graphics, you can follow the steps below:

  1. 1. Open AutoCAD 2012 and choose to open an existing drawing or create a new drawing.

  2. 2. Use the INSERT command to select or create the block graphics you want to output.

  3. 3. Check the properties of the block to make sure they meet the requirements for the output.

  4. 4. Switch to the space where you want to perform layout or model operations.

  5. 5. Use the INSERT command to insert block graphics.

  6. 6. Use the MOVE command to adjust the position of the block graphics.

  7. 7. Enter the print settings and select the appropriate printing parameters as needed.

  8. 8. Use the PREVIEW command to preview the printing effect.

  9. 9. After confirming that the settings are correct, use the PLOT or PRINT command to perform printing.

To summarize:

To export block graphics in AutoCAD 2012, we need to ensure that the block graphics we select or create meet the requirements and adjust its properties. and insert and adjust in the correct layout or model space. In addition, you need to set the printing parameters correctly to ensure that the block graphics can be output at the correct scale and position. By following these steps, we can successfully export block drawings in AutoCAD 2012.

The above is the detailed content of How to output block graphics in 2012CAd. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:docexcel.net. If there is any infringement, please contact admin@php.cn delete