How to Fix iPhone Proximity Sensor Too Sensitive

Well, it rarely happens that items that are known to never fail also fail to perform tasks as expected. One such iPhone project is the proximity sensor. It's a small device that can identify if something is in front of your phone. Well, the task of this sensor sounds very simple, but its value is realized when it stops working. If anything comes close, the phone's touch screen will be disabled. When you deal with the “iPhone In the following article, we will solve the “proximity sensor on iPhone is too sensitive” issue in the best possible way.

Part 1: Why is the iPhone proximity sensor too sensitive?

While Apple is known for its high-quality and powerful products, the devices are extremely powerful. Well, when there is a malfunction in the gadget! First let’s look at the reasons why your proximity sensor may be malfunctioning.

Change iPhone Screen: Due to our improper handling of the phone, we often break the iPhone screen and need to fix it immediately! Here, the problem is proximity sensor activation. Overall, if a broken iPhone screen is repaired, this means that the proximity sensor is most likely not put back in place properly after the screen was fixed. iPhone parts are very small and require precise placement.

Put your phone down on a hard surface: Well, you don’t need to actually check it! All we are saying is that even if you give your phone a fair amount of protection with a phone case, the damage is done after hitting a hard surface! You can't escape it. This is where your proximity sensor gets damaged.

Manufacturer Issues: Failure is never around you. Sometimes the culprit may be the manufacturer himself. It may happen that the proximity sensor in the phone has malfunctioned.

System Problems: Then sometimes the system is the problem. When you update your system with the latest iOS version, sometimes iOS gets corrupted and may need to be repaired.

Part 2: How to Fix iPhone Proximity Sensor Too Sensitive

Now that we have gone through the reasons behind the “iPhone proximity sensor is always on” issue, let us now move on to the solutions to the problem.

Solution 1: Restart iPhone

Just restart your iPhone to solve the problem of "iPhone screen proximity sensor is too sensitive". To restart your iPhone, follow these steps:

Step 1: Press and hold the upper right power button until the "Slide to Power Off" slider appears on the screen. Just slide the power switch to the right.

Step 2: Now turn on the device again by long pressing the power button until you see the Apple logo on the screen. Release when the Apple logo appears.

Solution 2: Clean Screen

Many times, very simple things can work wonders and solve your problem. We are discussing the simple steps to clean your iPhone screen. Simply remove any case or screen protector from your iPhone and simply clean the screen. You can simply use any eyeglass cleaning cloth. Sounds simple!

Solution 3: Reset All Settings

Well, we highly recommend you to back up your iPhone before choosing this solution. Reason for complete data loss! This solution may provide you with iPhone proximity sensor fix, but it will also delete all your data. Follow the steps below to hard reset your iPhone.

Step 1: On your iPhone, go to Settings >> General.

Step 2: Now go to Reset >> Erase all content and settings. With this, all your data and problems will disappear. We recommend that you make a backup before using this solution.

Solution 4: Put iPhone into DFU Mode

The default firmware update is responsible for rebuilding the iPhone’s software structure. Please note that when you perform a DFU restore, every bit of your data will be completely deleted. Before proceeding, please back up your data. Follow the steps below to put your iPhone into DFU mode.

Step 1: Connect iPhone and PC. Open iTunes. Now, press and hold the sleep/wake as well as home button for at least 10 seconds.

Step 2: Now release only the sleep/wake button. When you see the "iTunes has detected an iPhone in recovery mode" message, then only release the "Home" button (but not before).

Step 3: To check if your phone is in DFU mode, check if your iPhone’s screen is black. If not, start the process again.

Solution 5: Fix iPhone Proximity Issue without Data Loss

Even after going through the solutions discussed above, you cannot fix the “iPhone Proximity Sensor Always On” issue, the last option is Tenorshare ReiBoot. It may happen that the iPhone has some issues only and not the proximity sensor. So you need to fix your iPhone system, not the sensor. For this purpose, Tenorshare ReiBoot is a pro as it is the best solution for any type of iOS problem. Please follow the steps below to resolve your issue.

Step 1: Open Tenorshare ReiBoot on your PC and connect your iPhone. Click on the "Fix All iOS Stuck" option.

Step 2: Click on the "Fix Now" option and download the latest firmware package.

Step 3: After the download is complete, click "Start Repair". At some point, your iPhone will automatically update and restart with the latest iOS version without any issues.

The above is the detailed content of How to Fix iPhone Proximity Sensor Too Sensitive. For more information, please follow other related articles on the PHP Chinese website!