Why does WinXP automatically restart after clicking Shut Down?

Why winxp restarts after shutting down

System shutdown becomes a restart failure.

First, set the BIOS correctly.

If your computer is connected to the network or a USB device is connected, and the BIOS settings are incorrect, it is likely that it will not shut down properly. usually,

Old motherboards are prone to this kind of failure. Just disable the network wake-up and USB wake-up options in the BIOS.

2. Set up power management

Shutdown is closely related to power management. Sometimes incorrect settings of power management options can also cause shutdown failure.

Click "Start→Settings→Control Panel→Power Options", in the pop-up window, enable or cancel "Advanced power support" as needed

(If you were using "Advanced Power Support" when the failure occurred, try to disable it, otherwise enable it),

This method in Windows 98 can often solve most shutdown failures caused by power management.

If "When pressing the computer power button (E): Turn off the power" in the "Advanced" menu is not selected, just select it.

3. Disable quick shutdown

Sometimes using the Windows quick shutdown function can also cause this type of shutdown failure. In Windows 98, it can be solved by the following methods:

Enter Msconfig in "Start → Run", open the "System Configuration Utility", and select "Disable Fast Shutdown" in the "Advanced" option,

Then restart the computer.

What is the problem with XP automatically restarting after shutdown

Let it shut down and then restart

This fault is the most common fault that occurs when shutting down the Windows XP operating system. The cause of this failure may be the following:

1. System settings are causing chaos

By default, Windows XP will automatically restart when an error occurs in the system, so that when the user shuts down the computer, if an error occurs in the system during the shutdown process, the computer will be restarted. Turning this feature off can often resolve automatic restart failures.

Right-click "My Computer" on the desktop, select "Properties" in the pop-up right-click menu, the "System Properties" window will pop up, click the "Advanced" tab, and click in the "Startup and Recovery" column "Settings" button pops up the "Startup and Recovery" window, as shown in Figure 1. In the "System Failure" column, remove the check mark in front of the "Automatic Restart" option and click the "OK" button.

2. Advanced power management is causing trouble

As we all know, shutdown is closely related to power management. The cause of shutdown failure is likely to be caused by poor power management support for the system.

Click "Start→Settings→Control Panel→Performance and Maintenance→Power Options", and in the pop-up window, enable or cancel "Advanced Power Support" as needed. If you are using "Advanced Power Support" to enable "Advanced Power Support" when the fault occurs, try to cancel it. If you are using "Advanced Power Support" to cancel "Advanced Power Support" when the fault occurs, try to enable it. The fault will often be solved.

3. Don’t worry about USB devices

Nowadays, USB devices are very popular, including USB flash drives, mice, keyboards, Modems, etc., you can find them all. Little do we know that these USB devices are often the culprit causing shutdown failures. When a shutdown turns into a restart failure, if there is a USB device connected to your computer, please unplug it first and try again. If you are sure that the USB device is faulty, it is best to replace the device or connect it An external USB Hub. Connect the USB device to the USB Hub instead of directly connecting it to the USB interface of the motherboard.

The computer automatically restarted after a while after the xp point was closed? What's going on

For Windows XP, due to its use of the NT kernel with high security performance, the system operation is relatively stable. In addition to the slow shutdown speed, shutdown failures rarely occur under normal circumstances. But sometimes when shutting down Windows XP, it restarts inexplicably. This fault is the most common shutdown fault in the Windows XP operating system. The cause of this failure may be the following:

QUOTE:

System Settings

By default, Windows XP will automatically restart when an error occurs in the system, so that when the user shuts down the computer, if an error occurs in the system during the shutdown process, the computer will be restarted. Turning this feature off can often resolve automatic restart failures.

Right-click "My Computer" on the desktop, select "Properties" in the pop-up right-click menu, the "System Properties" window will pop up, click the "Advanced" tab, and click in the "Startup and Recovery" column "Settings" button, the "Startup and Recovery" window pops up. In the "System Failure" column, remove the check mark before the "Automatic Restart" option and click the "OK" button.

QUOTE:

Advanced Power Management

As we all know, shutdown is closely related to power management. The cause of shutdown failure is likely to be caused by poor power management support for the system.

Click "Start→Settings→Control Panel→Performance and Maintenance→Power Options", and in the pop-up window, enable or cancel "Advanced Power Support" as needed. If you are using "Advanced Power Support" to enable "Advanced Power Support" when the fault occurs, try to cancel it. If you are using "Advanced Power Support" to cancel "Advanced Power Support" when the fault occurs, try to enable it. The fault will often be solved.

QUOTE:

USB device

Nowadays, USB devices are very popular, including USB flash drives, mice, keyboards, Modems, etc., you can find them all. Little do we know that these USB devices are often the culprit causing shutdown failures. When a shutdown turns into a restart failure, if there is a USB device connected to your computer, please unplug it first and try again. If you are sure that the USB device is faulty, it is best to replace the device or connect it An external USB Hub. Connect the USB device to the USB Hub instead of directly connecting it to the USB interface of the motherboard.

The above is the detailed content of Why does WinXP automatically restart after clicking Shut Down?. For more information, please follow other related articles on the PHP Chinese website!