Solution to solve the problem of no power to the USB interface when win101909 shuts down

Some users find that after their computers are shut down, the USB interface is still powered. If you don’t know how to solve this situation, it may be due to our system settings, not the hardware equipment. Let’s take a look at how to solve the interface problem~

How to solve the problem of shutting down the USB interface power supply in win101909:

1. First press the power button to turn on the computer and then press the blue ThinkVantage button.

Press F1 in the selection interface that appears to enter the BIOS setting interface.

2. Then use the left and right keys and the Enter key to select the USB item under the Config tab,

change "Always On USB" and

3, and then select "Always On USB Charge" in Off Mode" are all adjusted to the "Enabled" state.

4. If you think it is not convenient enough to enter the BIOS interface to set up,

you can also enter the Windows system and do it in the "Power Manager" software set up.

5. Just check the options of "Enable 'Always turn on USB power supply'" and "Enable even when the computer is in sleep or shutdown state".

. It should be noted that any adjustment made in any interface is an overall adjustment.

The above is the detailed content of Solution to solve the problem of no power to the USB interface when win101909 shuts down. For more information, please follow other related articles on the PHP Chinese website!