Solution to the problem that the login page of 192.168.1.1 router cannot be opened

When configuring the router in Win7 system, sometimes the 192.168.1.1 login page cannot be opened. What is the reason? The editor will introduce to you the reasons and solutions for the 192.168.1.1 page that cannot be opened. .

The WEB server of the router itself is faulty. Due to communication problems between the router and the Windows 7 computer, the 192.168.1.1 login page of the router cannot be opened.

Due to the following three reasons, normal communication between the router and the Windows 7 computer cannot occur:

1. The network cable connecting the router and the Windows 7 computer is not plugged in correctly.

2. Router DHCP server and other issues.

3. There is a problem with the local connection configuration in the Windows 7 computer.

Therefore, you must first determine whether it is a WEB failure of the router or a network communication problem. If it is a network communication problem, you need to further determine what the cause is. As long as you find the root cause of the fault and solve it, you can open the router. The 192.168.1.1 page.

Determine the cause of the fault:

The network error command ping192.168.1.1 is needed here. You only need to run this command under the cmd program under the Windows 7 system, and you can judge the router based on the running results. The problem is the WEB server or the network communication problem.

Open the cmd program. Method: Click the Start menu button of Windows 7, enter cmd in the run box and return to the vehicle.

Execute the ping command in the command prompt window. The target address of ping is 192.168.1.1. You can determine the location based on the returned results by entering the command "ping 192.168.1.1" in cmd and pressing Enter.

There are two results after running ping192.168.1.1: success and failure. Once the ping is successful, it can be determined that the failure to open the 192.168.1.1 page is due to a failure of the router's WEB server. The solution is to contact the merchant you purchased from for a return or repair.

The cause of ping failure cannot be directly determined and needs to be further eliminated. The method is as follows:

Check whether the network cable connection is correct.

The router end should be plugged into the router's LAN interface (any one of the 4 interfaces is fine), and check the indicator light of the corresponding interface on the router. Is the indicator light of the Internet cable interface of the Windows 7 computer on? Only when the indicator light is on (flashing), it is in a normal state. If it does not light up, it means there is a problem with the connection. Please replace the network cable and reconnect. If the network cable connection is normal, but the 192.168.1.1 page still cannot be opened, it indicates a local connection configuration problem in the Windows 7 system, or a problem with the router DHCP server.

Reconfigure local connection in Windows7.

Right-click the network and select Properties.

2. Click Change Adapter Settings

Right-click the local connection and select Properties

4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

5. Check the Obtain IP address automatically and Obtain DNS server address automatically options - click OK.

The above are the reasons and solutions for why the 192.168.1.1 page cannot be opened. If it still cannot be opened, the router may be damaged and a new router needs to be replaced.

The above is the detailed content of Solution to the problem that the login page of 192.168.1.1 router cannot be opened. For more information, please follow other related articles on the PHP Chinese website!