Home  >  Article  >  Operation and Maintenance  >  Common configuration techniques for using GCC for embedded ARM assembly optimization under Linux

Common configuration techniques for using GCC for embedded ARM assembly optimization under Linux

王林
王林Original
2023-07-04 12:58:391196browse

Common configuration techniques for using GCC for embedded ARM assembly optimization under Linux

Abstract:
With the popularity and development of embedded systems, the requirements for performance are increasing day by day. Embedded ARM assembly optimization becomes a very important link. This article will introduce common configuration techniques for ARM assembly optimization using GCC under Linux, and provide detailed explanations with code examples. These configuration techniques include compilation options, inline assembly, register selection and loop optimization, etc., which can help developers take full advantage of the performance advantages of the ARM architecture.

  1. Compilation options
    The GCC compiler provides some options for optimizing ARM assembly code. Commonly used options include -O (optimization level), -march (target architecture), -mtune (target processor type), etc.

For example, we can use the following command line to configure compilation options:

gcc -O3 -march=armv7-a -mtune=cortex-a9 -c mycode.c -o mycode.o

The -O3 here indicates the highest level of optimization, and -march=armv7-a specifies the target architecture as ARMv7- A, -mtune=cortex-a9 specifies the target processor type as Cortex-A9. By properly configuring compilation options, the generated assembly code can be made more efficient.

  1. Inline assembly
    GCC provides the function of inline assembly, which can embed assembly code directly in C code. Inline assembly allows us to take full advantage of assembly language and achieve higher performance.

The sample code is as follows:

int add(int a, int b)
{
    int result;
    asm volatile(
        "add %[result], %[a], %[b]"
        : [result] "=r"(result)
        : [a] "r"(a), [b] "r"(b)
    );
    return result;
}

In the above example, we implement the function of adding two integers through inline assembly. Variables in C code can be referenced in embedded ARM assembly by using the %[result], %[a] and %[b] variables instead of the corresponding registers. In this way, we can take full advantage of the flexibility of assembly language and achieve more efficient code.

  1. Register selection
    When writing embedded ARM assembly code, selecting appropriate registers is very important for performance optimization. On the one hand, it is necessary to make full use of the multiple registers provided by the ARM architecture to avoid frequent data loading and storage operations. On the other hand, register overflows and conflicts must be avoided to ensure the correct operation of the assembly code.

The sample code is as follows:

int multiply(int a, int b)
{
    int result;
    asm volatile(
        "mov r0, %[a]
"
        "mov r1, %[b]
"
        "mul %[result], r0, r1"
        : [result] "=r"(result)
        : [a] "r"(a), [b] "r"(b)
        : "r0", "r1"
    );
    return result;
}

In the above example, we use registers r0 and r1 to store the input parameters a and b respectively, and then use the mul instruction to perform multiplication, and The result is saved in the result variable. By choosing registers appropriately, you can avoid register overflow and conflict problems and improve code efficiency.

  1. Loop Optimization
    In embedded systems, loops are frequently used control structures. Optimizing loop code can significantly improve program performance. The GCC compiler provides some optimization options for optimizing loop code.

The sample code is as follows:

void sum(int *data, int size)
{
    int sum = 0;
    for (int i = 0; i < size; i++)
    {
        sum += data[i];
    }
    asm volatile(
        "mov %[sum], r0"
        : [sum] "=r"(sum)
        :
        : "r0"
    );
}

In the above example, we put the accumulation operation into the assembly part by optimizing the loop code. In this way, the judgment of the loop end condition can be reduced and the execution efficiency of the loop can be improved. At the same time, we use register r0 to store the accumulation results, and avoid register overflow and conflict problems by rationally selecting registers.

Conclusion:
This article introduces common configuration techniques for using GCC for embedded ARM assembly optimization under Linux, and explains it in detail with code examples. These configuration techniques include compilation options, inline assembly, register selection and loop optimization, etc., which can help developers give full play to the performance advantages of the ARM architecture and improve the performance and efficiency of embedded systems.

The above is the detailed content of Common configuration techniques for using GCC for embedded ARM assembly optimization under Linux. For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn