Why can’t I connect to the Internet even though I’m connected wirelessly?

The wireless connection but the inability to access the Internet is caused by problems such as router failure and mobile phone settings. The solutions are: 1. Open the browser, enter 192.168.1.1, and log in to the web configuration of the current router. The interface, user name and password are all admin by default; 2. Find the WAN port settings of the router, select PPPoE for home, and DHCP for community or hotel; 3. Fill in the correct user name and password; 4. Next, check the LAN port of the router Settings; 5. Check the security settings of the router.

The operating environment of this tutorial: Windows 10 system, DELL G3 computer.

I don’t know if you have encountered such a situation while surfing the Internet. It is obvious that the computer or mobile phone has been connected to the wireless network, and the connection is also displayed in the background, but the network cannot be used. Many people have encountered this situation. This situation can be overwhelming. Don't worry, today the editor has prepared relevant tutorials for you, I hope it will be helpful to you.

Why can’t I access the Internet even though I’m connected to wifi?

1. Check the router settings:

Step one: Open the current wireless router connected In the browser of your computer, enter 192.168.1.1 in the address bar (some routers are 192.168.0.1, check the bottom label of the router to find out), log in to the web configuration interface of the current router, the default user name and password are admin

Step 2: Under the router’s network settings, first find the router’s WAN port setting options. Correctly setting the "type" here is the key to the problem. There are two commonly used types: PPPoE and DHCP. This choice depends on your own situation. If it is home ADSL dial-up Internet access, choose PPPoE; if it is residential broadband or a hotel with a direct network interface available, choose DHCP

Step 3: If it is For DHCP, there is no need to make other settings, the router will automatically obtain the corresponding network settings. If you choose PPPoE, you need to fill in the correct user name and password. These are provided by network service providers, such as China Telecom. If you forget your password, you can call 10,000 for manual consultation

Step 4: Next, check the router’s LAN port settings. The settings of different brands are actually similar. The most important thing is to turn on the DHCP function, so as to ensure that the router can assign an IP address to the device when it is connected to the LAN port or connected to wifi. The IP address range assigned by DHCP must be consistent with that of the router. The IP address is in the same network segment, such as 192.168.1.X

Step 5: Finally, check the security settings of the router. Check whether some security policies that restrict MAC or IP address connections, or corresponding speed limiting policies, are enabled. If so, turn them off. Otherwise, only devices with specific MAC or IP addresses can connect.

2. Check the phone settings

Step one: Open the phone settings, select "Wi-Fi", then, when you see the wifi signal you are currently connected to, click the small blue circle arrow on the far right

Step 2: Click "Ignore this network". Then, the phone's wifi connection will be disconnected. In this way, when you click to connect to the signal source again, the phone will not automatically connect. Instead, you will have to re-enter the connected wifi password. In other words, the phone will re-identify the network. , this will achieve the effect of clearing the original network configuration

Step 3: If you want to clear it more thoroughly, you can open Settings---General---Restore, and select "Restore Network Settings". In this way, the device will restart. After the restart, all previously connected networks will not be saved, but will be recognized as new networks. You need to enter the wifi password to connect

The above is the detailed content of Why can’t I connect to the Internet even though I’m connected wirelessly?. For more information, please follow other related articles on the PHP Chinese website!