How to fix failure to configure Windows Update to restore changes error?

To run your system, Windows needs to be updated regularly, but many people face serious problems while upgrading their systems. “Cannot configure Windows Update to revert changes. Do not shut down the computer” error is a common problem that can be solved with appropriate methods. Devicetricks has come up with some easy-to-follow steps that can guide you to solve the problem systematically and instantly.

What does the Configure Windows Update failed to restore changes error mean?

Upgrade your system to a higher level, many times you will end up freezing the window and popping up an error message saying "Configuring Windows Update failed while resuming the change loop .Do not turn off your computer". This error indicates that the current operating system is trying to roll back to the previous Windows system as it was before the update. There are many reasons why updating Windows may fail, each of which is listed below.

Why do I get the error Configuring Windows Update to restore changes failed?

When updating Windows, there are many things that can cause Windows to freeze. On earlier versions of Windows where this error occurs, the Windows operating system attempts to roll back to its previous version. This always happens when you see this error on your screen.

There may be multiple reasons why the update failed. Some of them are listed below:

1. The installed software is incompatible with the computer.
2. During testing, no issues were discovered, but sometimes the update itself is the main reason.
3. Interference observed with removable media.
4. Many updates at one time can create load on the operating system.

As we all know, Windows Update may introduce some new features and fix some bugs to the operating system. These updates may cause some problems for users: such as data loss or Windows not being able to start after the update. Therefore, before solving this problem, it is always recommended to take some precautions to avoid such unexpected issues.

Create a system image before updating Windows?

It is always recommended that you create a system image to protect your important data so that in case of any mishap you can easily restore your computer to its previous working state. To create a system image, there are many tools and software available for download online. Use any of them to create system image as per your convenience.

After creating the system image, you can easily try the below mentioned solutions to fix the error.

How to fix failure to configure Windows Update to restore changes error?

We have tried some easy-to-implement solutions for you to fix this error. Let’s look at these fixes one by one.

Run the Windows Update Troubleshooter

• Download the Windows Update Troubleshooter from Microsoft.

• Click the Next button on the troubleshooting display window.

• After troubleshooting, try installing Windows updates once the issue is resolved.

Install updates in clean boot state

• In administrator mode Run the operating system and open the running program by pressing the Windows R key completely, then type msconfig and press enter.

• Select Selective startup in the window and uncheck Select to load startup items.

##In the menu bar, select the Hide all Microsoft services option by clicking
• Services tab and check mark while clicking to disable all options and click OK to save the changes.

• Restart your computer to put your computer in a clean boot state after restarting.

Clear cache files

• Open Run program and enter services.msc, then press OKOpen the service window.

• Scroll down the list and search for Windows Update and double-click it.

• To stop the service, click the Stop button and press OK to save the changes.

• Scroll down the list again and search for Background Intelligent Transfer Service. Double-click it to stop the service as you did in the previous step.

• After completion Minimize the service window.
• Press Windows key E key simultaneouslyOpen Windows File Explorer.

• Navigate to c:\Windows\SoftwareDistribution\Download and select all files by pressing the Ctrl A key Delete All files. Right-click on it and select the Remove option from the menu.

## Maximize the services window and scroll down in the list again to search for
• Window updates and Background Intelligent Transfer Services and restarts previously stopped services.

• Restart your computer and see if the problem is resolved.
Restore or reinstall Windows

Right-click

This PC and
• select Properties from the menu.

Select the

System Protection
• option in the properties window.

System Protection
• The tab will lead you to System Properties where you need to select System Restoreoptions.

Now

follow the instructions
• displayed on the screen to complete the process.

If the problem still exists, please follow this method to solve the problem, please

re-install
• the operating system . Perform the reinstallation using Windows installation media such as a DVD or USB drive and perform the complete process.

Finally, restart your computer after completing all the processes.

• Installing updates in safe mode

During system restartPress F8

• key, and then select "Secure with Networking mode".

This will help you to log in to the desktop and press

Windows

• R key to open the RUN program and type " msconfig ", then click OK Open the program.
  • Navigate to the Boot tab in the System Configuration window. Make sure Safe Boot The box is marked with a tick and the minimal options shown below it are selected. After checking everything, press the OK and Apply buttons to save the changes.

  

  • After pressing the Apply button, you will be asked to restart the system and then press the Restart button to continue the process.

  

  • ## Restart the system in safe mode , open settings and search Updated and secure.

  

  Click the
  Windows Update
  • button to update Windows.

  

  After the Windows update is complete
  • , restart your computer in safe mode. Open System Configuration again by typing
  msconfig in the
  • Run Program dialog box, as you did in the previous step.

  

  Back to the
  Launch tab
  • again, this time unchecked Safe Boot box and click OK and Apply changes and restart the computer.

  

  Run SFC scan
  Search in the start menu and run as administrator box to find Command Prompt.

  ##Type

  sfc /scannow# in the
  Command Prompt
  • window ## and press Enter button to start the process.

  Wait until the process is completed. Restart

  the system to check for errors.
  • Remove all peripheral devices from the PC

  Usually these are storage devices such as USB drives. Memory cards and disks do not create any problem, but when the system reboots, the media storage drive starts performing and can cause problems. So, to get rid of this problem, follow the steps provided below.

  First,

  turn off the computer

  and then press and hold the power button for 45 seconds.

  Now, remove all external devices like USB drives, memory cards, and any disks in CD/DVD ROM from your PC.

  The external memory card can be easily removed, but to remove the disk inserted into the optical drive, you will need a paper pin and insert it into the disk hole .

  After you have removed all external devices, turn on your computer.

  This time,
  Windows Update
  • will run smoothly.
  • Manually Select Updates

  Windows updates are available in a bunch, and downloading them all at the same time can cause problems. Therefore, you can manually detach the update file and then install the update to resolve the issue. If you see the "Repair configuration Windows Update failed to restore changes" error on your screen, it means you are unable to access the login panel. So, here you need to enter safe mode to apply the process listed below.

  Completely shut down

  your computer.
  • Now, turn on your computer, if you notice a continuous loop appears on the screen, then hold down the power button for 45 seconds to turn it off again.

  

  • Repeat the above process 3 times and then you will find the Safe Mode option on the screen. Make sure "Safety Mode with Networking" is selected.

  

  • After entering safe mode, click the Start menu and type "Control Panel## in the search bar #" and then press the "Enter" key.

  

  In the Control Panel window you will get a few options, select "
  • System and Security".

  

  After this, you will find the option of
  • Windows Update, click on it.

  

  Now, click on the "
  • Important Updates" menu and select "Check for Updates" from the drop-down menu. But let me choose whether to download and install them".

  

  After completing the above tasks, click on
  • Get me recommended updates in the same way you receive important updates checkbox. Make sure this box should be checked and the remaining boxes should be unchecked.

  

  Back to the Windows Update page, in the left panel you will find
  • The number of updates available to you, single Hit it.

  

  Soon you will find the list of updates and everything you need to install them one by one. After installing the update, repeat the above process again to complete the complete update process.
  • After completing the entire update process,
  • restart the computer.

  Perform System Restore Tasks

  The System Restore feature in Windows operating system is like a time machine that can restore your operating system to its running state steady state. To use this feature, you must have a previously generated system restore point. If you don't have the same functionality, you won't be able to access this feature. Now, follow the steps provided below to restore your operating system to working condition.
  Open
  • your computer and log in using your administrative password.

  

  Now,
  • insert the Windows operating system disk into the CD/DVD drive and restart the computer.

  

  After this, the Windows installation page will appear on your screen, select the time, date and language. After completing this step, click the "
  • Next" button.

  

  Soon, you will be given "
  • System Recovery Options" and your job is to select "System Recovery " option.

  

  After that you will be directed to the page where
  • restore points are generated, select one and click Next button.

  

  After the restore process is complete,
  • restart the computer.

The above is the detailed content of How to fix failure to configure Windows Update to restore changes error?. For more information, please follow other related articles on the PHP Chinese website!