What to do if the black screen cannot be woken up after win10 is in standby
Method 1:
1. Press and hold win i at the same time to open the settings page, click "System"
2. Then, click "Power and Sleep" on the left, and then set the "Screen" and "Sleep" options on the right to "Never"
3. Then, slide down, find and click "Other Power Settings"
4. Enter the power options page Then, click to open "Select a time to turn off the display"
5. As shown in the figure, set Turn off the display to "Never" and click " Save changes”
6. After completing the above settings, click "Change advanced power settings" below #7. When the computer options window pops up, click to set "Sleep" - "Sleep after this time" to "Never", click "OK"
8. Finally, click Settings "Display" - "Turn off display after" to "Never", click "OK" and that's it
Method 2:
1. Restart the computer first. After entering the win10 desktop, search and open the control panel
2. Then, set the viewing mode to small icons and find And open the Device Manager3. Then, click to expand the network adapter, as shown in the figure, right-click and select Properties4. Finally, click to switch the power management tab, and uncheck Allow The computer turns off this device to save power, click OKMethod 3:1. However, if your computer still cannot start normally after restarting, and you don’t know what you did before What have been done2. In other words, if the computer fault cannot be checked, you can choose to reinstall the system to solve the problemThrough the above operations, you can solve the problem that the win10 computer cannot work after the standby black screen Wake up situation. In fact, various problems may occur when using a computer. If you also put the system into hibernation standby state to save consumption when the computer is not working temporarily, but you have a black screen and cannot wake up the screen, then refer to today's article to solve the problem.The above is the detailed content of What to do if win10 computer cannot wake up after black screen in standby mode. For more information, please follow other related articles on the PHP Chinese website!