Let’s talk about how to restore bios to factory settings

http://www.php.cn/

If you are using an older computer, then this You can’t miss this article. When we use computers, we will inevitably encounter some problems, which may even require BIOS settings to solve. Nowadays, many new computers have a Chinese BIOS interface, but old computers have an English interface, so if you want to restore the BIOS to factory settings, a lot of people probably don't know how to do it. Today, the editor will talk about this operation. Let’s take a look at the tutorial on restoring bios to factory settings.

How to restore bios to factory settings

Method 1:

1. Query the bios startup shortcut key corresponding to the computer, start the computer and keep pressing the key to enter the bios setting interface

2. Then, switch to the Exit menu, select Load Setup Defaults and press Enter

3. Then, in the pop-up Setup Confirmation In the confirmation dialog box, select Yes and press Enter

4. Finally, press the F10 key, select Yes and press Enter to save the settings, and you can restore the BIOS to the system.

Method two:

1. In addition to method one, we can also restore the bios factory settings through physical methods. The motherboard button battery can ensure that the computer Continuously power the bios chip after shutting down

2. In fact, the bios chip uses ram to save the motherboard information. If the power is cut off, the information saved in the bios will be cleared

3 , Therefore, you can choose to remove the motherboard button battery to reset the BIOS, and then you can restore the BIOS to the factory settings

4. The most important point is that you must remember the positive and negative placement of the battery, and wait for twenty minutes. Just put it in

Method three:

1. In addition, some motherboards will also be equipped with "hard jumpers", which can also help You restore the factory device

2. The operation is very simple. Follow the prompts and use a jumper cap to short the "2" and "3" pins to erase the information on the BIOS and achieve BIOS recovery. The effect of factory settings

The above steps are all the contents of this bios restore to factory settings. Generally speaking, after the computer BIOS is restored to factory settings, the BIOS settings you made before will be cleared and the motherboard will be restored to its initial state. Therefore, as long as you have not made any special operation settings before, it will not have any impact on the computer system. Okay, that’s it for today. Friends in need remember to save the article for later use.

http://www.php.cn/

The above is the detailed content of Let’s talk about how to restore bios to factory settings. For more information, please follow other related articles on the PHP Chinese website!