What is the problem with linux error code 13?

Linux error code 13 is a permission problem. The solution is: 1. Install xshell, right-click on the corresponding folder and there will be a change permission, change the permission to 777; 2. In the server In the black box screen, enter "chmod 777" and add the corresponding directory or file whose permissions you want to modify.

#The operating environment of this tutorial: linux5.9.8 system, Dell G3 computer.

linux What is the problem with error code 13?

Permission denied [13] error appears under Linux server

This error appears under Linux because of permission issues. If you are using a server, you can install xshell and have the corresponding xftp File is a graphical interface. Right-click on the corresponding folder and there will be a change permission. Just change the permission to 777. 777 means writable, readable and executable.

If this does not work, you can enter chmod 777 in the black box screen of the server and add the corresponding directory or file whose permissions you want to modify, so that the corresponding permissions can be changed.

The error I encountered before was like this. I changed the environment in the laboratory and needed to use a file I created in another environment. As a result, the permissions were not enough. I never understood what it meant. I found out later. This is what it looks like.

Or don’t execute the previous one, just execute the part marked in bold. Because the previous graphical interface may not work, I installed matlab before and it was OK to execute it like this, but when this error occurred and I executed it like this, it didn’t work because after changing it, it returned to its original appearance. As for why, I I don’t know, it may be due to the software, but if you have this software, you can use this modification to see if it works. Because some people don’t like to operate on a black screen.

Linux system error code collection

#define EPERM            1      /* Operation not permitted */
#define ENOENT           2      /* No such file or directory */
#define ESRCH            3      /* No such process */
#define EINTR            4      /* Interrupted system call */
#define EIO              5      /* I/O error */
#define ENXIO            6      /* No such device or address */
#define E2BIG            7      /* Arg list too long */
#define ENOEXEC          8      /* Exec format error */
#define EBADF            9      /* Bad file number */
#define ECHILD          10      /* No child processes */
#define EAGAIN          11      /* Try again */
#define ENOMEM          12      /* Out of memory */
#define EACCES          13      /* Permission denied */
#define EFAULT          14      /* Bad address */
#define ENOTBLK         15      /* Block device required */
#define EBUSY           16      /* Device or resource busy */
#define EEXIST          17      /* File exists */
#define EXDEV           18      /* Cross-device link */
#define ENODEV          19      /* No such device */
#define ENOTDIR         20      /* Not a directory */
#define EISDIR          21      /* Is a directory */
#define EINVAL          22      /* Invalid argument */
#define ENFILE          23      /* File table overflow */
#define EMFILE          24      /* Too many open files */
#define ENOTTY          25      /* Not a typewriter */
#define ETXTBSY         26      /* Text file busy */
#define EFBIG           27      /* File too large */
#define ENOSPC          28      /* No space left on device */
#define ESPIPE          29      /* Illegal seek */
#define EROFS           30      /* Read-only file system */
#define EMLINK          31      /* Too many links */
#define EPIPE           32      /* Broken pipe */
#define EDOM            33      /* Math argument out of domain of func */
#define ERANGE          34      /* Math result not representable */
#define EDEADLK         35      /* Resource deadlock would occur */
#define ENAMETOOLONG    36      /* File name too long */
#define ENOLCK          37      /* No record locks available */
#define ENOSYS          38      /* Function not implemented */
#define ENOTEMPTY       39      /* Directory not empty */
#define ELOOP           40      /* Too many symbolic links encountered */
#define EWOULDBLOCK     EAGAIN  /* Operation would block */
#define ENOMSG          42      /* No message of desired type */
#define EIDRM           43      /* Identifier removed */
#define ECHRNG          44      /* Channel number out of range */
#define EL2NSYNC        45      /* Level 2 not synchronized */
#define EL3HLT          46      /* Level 3 halted */
#define EL3RST          47      /* Level 3 reset */
#define ELNRNG          48      /* Link number out of range */
#define EUNATCH         49      /* Protocol driver not attached */
#define ENOCSI          50      /* No CSI structure available */
#define EL2HLT          51      /* Level 2 halted */
#define EBADE           52      /* Invalid exchange */
#define EBADR           53      /* Invalid request descriptor */
#define EXFULL          54      /* Exchange full */
#define ENOANO          55      /* No anode */
#define EBADRQC         56      /* Invalid request code */
#define EBADSLT         57      /* Invalid slot */
#define EDEADLOCK       EDEADLK
#define EBFONT          59      /* Bad font file format */
#define ENOSTR          60      /* Device not a stream */
#define ENODATA         61      /* No data available */
#define ETIME           62      /* Timer expired */
#define ENOSR           63      /* Out of streams resources */
#define ENONET          64      /* Machine is not on the network */
#define ENOPKG          65      /* Package not installed */
#define EREMOTE         66      /* Object is remote */
#define ENOLINK         67      /* Link has been severed */
#define EADV            68      /* Advertise error */
#define ESRMNT          69      /* Srmount error */
#define ECOMM           70      /* Communication error on send */
#define EPROTO          71      /* Protocol error */
#define EMULTIHOP       72      /* Multihop attempted */
#define EDOTDOT         73      /* RFS specific error */
#define EBADMSG         74      /* Not a data message */
#define EOVERFLOW       75      /* Value too large for defined data type */
#define ENOTUNIQ        76      /* Name not unique on network */
#define EBADFD          77      /* File descriptor in bad state */
#define EREMCHG         78      /* Remote address changed */
#define ELIBACC         79      /* Can not access a needed shared library */
#define ELIBBAD         80      /* Accessing a corrupted shared library */
#define ELIBSCN         81      /* .lib section in a.out corrupted */
#define ELIBMAX         82      /* Attempting to link in too many shared libraries */
#define ELIBEXEC        83      /* Cannot exec a shared library directly */
#define EILSEQ          84      /* Illegal byte sequence */
#define ERESTART        85      /* Interrupted system call should be restarted */
#define ESTRPIPE        86      /* Streams pipe error */
#define EUSERS          87      /* Too many users */
#define ENOTSOCK        88      /* Socket operation on non-socket */
#define EDESTADDRREQ    89      /* Destination address required */
#define EMSGSIZE        90      /* Message too long */
#define EPROTOTYPE      91      /* Protocol wrong type for socket */
#define ENOPROTOOPT     92      /* Protocol not available */
#define EPROTONOSUPPORT 93      /* Protocol not supported */
#define ESOCKTNOSUPPORT 94      /* Socket type not supported */
#define EOPNOTSUPP      95      /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT    96      /* Protocol family not supported */
#define EAFNOSUPPORT    97      /* Address family not supported by protocol */
#define EADDRINUSE      98      /* Address already in use */
#define EADDRNOTAVAIL   99      /* Cannot assign requested address */
#define ENETDOWN        100     /* Network is down */
#define ENETUNREACH     101     /* Network is unreachable */
#define ENETRESET       102     /* Network dropped connection because of reset */
#define ECONNABORTED    103     /* Software caused connection abort */
#define ECONNRESET      104     /* Connection reset by peer */
#define ENOBUFS         105     /* No buffer space available */
#define EISCONN         106     /* Transport endpoint is already connected */
#define ENOTCONN        107     /* Transport endpoint is not connected */
#define ESHUTDOWN       108     /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS    109     /* Too many references: cannot splice */
#define ETIMEDOUT       110     /* Connection timed out */
#define ECONNREFUSED    111     /* Connection refused */
#define EHOSTDOWN       112     /* Host is down */
#define EHOSTUNREACH    113     /* No route to host */
#define EALREADY        114     /* Operation already in progress */
#define EINPROGRESS     115     /* Operation now in progress */
#define ESTALE          116     /* Stale NFS file handle */
#define EUCLEAN         117     /* Structure needs cleaning */
#define ENOTNAM         118     /* Not a XENIX named type file */
#define ENAVAIL         119     /* No XENIX semaphores available */
#define EISNAM          120     /* Is a named type file */
#define EREMOTEIO       121     /* Remote I/O error */
#define EDQUOT          122     /* Quota exceeded */
#define ENOMEDIUM       123     /* No medium found */
#define EMEDIUMTYPE     124     /* Wrong medium type */

Recommended study: "linux video tutorial"

The above is the detailed content of What is the problem with linux error code 13?. For more information, please follow other related articles on the PHP Chinese website!