What should I do if my wifi cannot be used after a power outage is restored?

The wifi cannot be used after the power outage is restored because of a sudden call, which causes the router to start running incorrectly. The solution: 1. Restart the router or press reset on the router to restore the factory settings; 2. Enter " 192.168.1.1", reset the password and account of the wireless router; 3. Restore the router to factory settings, and then reset it.

#The operating environment of this tutorial: Windows 10 system, Dell G3 computer.

What should I do if my wifi cannot be used after the power outage is restored?

1. Cause analysis: The router may start up and run incorrectly due to a sudden call. It is recommended to power off the router and modem for 2 minutes, and then try to power it on again. (The router is introduced below)

2. Solution:

1. Restart the router, or click reset on the router to restore factory settings, or enter 192.168.1.1 on the computer to reset The password and account number of the wireless router. If you encounter a sudden power outage or a power outage and your phone has a full WIFI signal but cannot connect to the Internet, don't worry. After the call comes in, turn off the router's power switch. At this time, some newbies ask what is a router? Let me tell you here, when connected to the Internet, the box with the most indicator lights, and after power is turned on, is all light green, is the router, and the network cable can be plugged into it.

#2. In addition, because the wireless router is turned on, you can search for wifi, but because there is no network cable plugged into the wireless router, you can After searching, I can't access the Internet either. So make sure your network is working properly. Then restore the router to factory settings, reset it, turn off the router, and restart it after a minute.

#3. If the fault still cannot be solved, try to connect the main network cable directly to the computer and dial up the Internet.

4. Restart the phone.

#5, or disconnect the currently connected WiFi signal, and then re-enter the password to connect to the signal to see if the connection can be normal.

#6. If the phone still cannot connect to WiFi after the appeal method is performed, please open the iPhone [Settings] - [General] - [Restore] [Restore Network Settings] , usually after restoring the network settings, you can usually connect to WiFi normally to solve the problem.

3. About the router

1. Router is a device that connects various local area networks and wide area networks in the Internet. It will automatically Select and set routing to send signals in order and along the best path. Routers are the hubs and "traffic police" of the Internet. At present, routers have been widely used in all walks of life, and products of various grades have become the main force in realizing internal connections of various backbone networks, interconnection between backbone networks, and interconnection between backbone networks and the Internet.

2. The main difference between routing and switches is that switching occurs at the second layer (data link layer) of the OSI reference model, while routing occurs at the third layer, the network layer. This difference determines that routing and switches need to use different control information in the process of moving information, so the ways in which they implement their respective functions are different.

3. Router, also known as gateway device, is used to connect multiple logically separated networks. The so-called logical network represents a separate network or a subnet. When data is transferred from one subnet to another, it is done through the routing function of the router. Therefore, the router has the function of determining the network address and selecting the IP path. It can establish flexible connections in a multi-network interconnection environment. It can connect various subnets with completely different data grouping and media access methods. The router only accepts source stations or Information about other routers is an interconnection device at the network layer.

For more related knowledge, please visit the FAQ column!

The above is the detailed content of What should I do if my wifi cannot be used after a power outage is restored?. For more information, please follow other related articles on the PHP Chinese website!