search
HomeCommon ProblemWhat does linux snmp service mean?
What does linux snmp service mean?Mar 03, 2023 am 10:28 AM
linuxsnmp service

In Linux, the SNMP service refers to the Simple Network Management Protocol. It is a network management standard protocol widely used in TCP/IP networks. It provides a central computer running network management software (i.e. Network management workstation) to monitor and manage a standardized management framework (method) for computer networks. SNMP services enable network administrators to manage network performance, identify and resolve network problems, and plan for network growth.

What does linux snmp service mean?

#The operating environment of this tutorial: linux7.3 system, Dell G3 computer.

What is SNMP service?

SNMP (Simple Network Management Protocol) is a network management standard protocol (application layer protocol) widely used in TCP/IP networks. It provides a central computer running network management software. (i.e. network management workstation) to monitor and manage the standardized management framework (method) of computer networks. Currently, three versions of SNMPv1, SNMPv2c and SNMPv3 have been promulgated, which are widely used in network equipment such as network switches, routers, and printers.

SNMP is a standard protocol specially designed for managing network nodes (servers, workstations, routers, switches, HUBS, etc.) in IP networks. It is an application layer protocol. SNMP enables network administrators to manage network performance, identify and resolve network problems, and plan for network growth. Network management systems are notified of network problems by receiving random messages (and event reports) via SNMP.

The predecessor of SNMP is Simple Gateway Monitoring Protocol (SGMP), which is used to manage communication lines. Subsequently, people made great modifications to SGMP, especially adding SMI and MIB that conform to the Internet definition. The improved protocol is the famous SNMP. The SNMP network management framework based on TCP/IP is the current standard in the industry and consists of three main parts, namely the management information structure SMI (Structure of Management Information), the management information base MIB and the management protocol SNMP.

  • SMI defines the organization and identification of information used by the SNMP framework, and provides templates for MIB to define management objects and use management objects.

  • MIB defines a collection of management objects that can be accessed through SNMP.

  • The SNMP protocol is an application layer protocol that defines how the network manager reads and writes the MIB object of the agent process.

Configuring the SNMP service of Linux

1. Install the SNMP service

1) Check whether the snmp rpm package has been installed on the system

The following are the rpm packages required to install the snmp service:

libsensors3-2.10.6-55.el5.i386.rpm
lm_sensors-2.10.6-55.el5.i386.rpm
net-snmp-libs-5.3.2.2-5.el5.i386.rpm
net-snmp-5.3.2.2-5.el5.i386.rpm
net-snmp-utils-5.3.2.2-5.el5.i386.rpm

Recommended to http://rpm. pbone.net/Download these rpm packages. This website is relatively comprehensive and contains various versions of packages.

Use command: $ rpm -qa|grep snmp

Check whether net-snmp-utils-5.3.2.2-5.el5, net-snmp-libs is installed -5.3.2.2-5.el5, net-snmp-5.3.2.2-5.el5 three rpm packages

Use command: $ rpm -qa|grep libsen

Check whether libsensors3-2.10.6-55.el5 is installed

Use command: $ rpm -qa|grep lm

Check whether lm_sensors-2.10.6 is installed -55.el5

Note:

(1) There is a certain order for the installation of these packages, and there will be a prompt during installation. For example, when installing

net-snmp-5.3.2.2-5.el5.i386.rpm, you will be prompted that net-snmp-libs-5.3.2.2-5.el5.i386.rpm must be installed first.

(2) net-snmp-utils-5.3.2.2-5.el5.i386.rpm is not a package that must be installed, but installing it will bring a lot of help. It provides many tools, such as You can use the snmptranslate command to view oid, and you can use the snmpget, snmpwalk commands, etc.

(3)net-snmp-libs-5.3.2.2-5.el5.i386.rpm、net-snmp-5.3.2.2-5.el5.i386.rpm、

net The three packages -snmp-utils-5.3.2.2-5.el5.i386.rpm have certain version requirements and must be of the same version, otherwise the installation will not succeed. I am using the 5.3.2.2-5.el5 version here. You can also download other versions of rpm packages, but please note that the versions must be consistent. During installation, you will also be prompted as to which version of the package is necessary. You can download it according to the prompts. Required package.

2) Install the above rpm packages

If the above packages are not installed in the system, install them first.

Use command: rpm –ivh package name

After installation, use command: $ rpm -qa|grep snmp to check whether it has been installed Successful installation.

YUM installation:

yum install -y net-snmp net-snmp-utils

3) Start snmp service

If the installation is successful, you can use the command:

$ service snmpd start

Prompt :Starting snmpd: [ OK ], then the snmp service is started successfully.

You can set the snmp service to start automatically at boot, thus eliminating the trouble of manual startup.

Use the command: $ chkconfig snmpd on to set the snmpd service to start automatically at boot.

Then use the command: $ chkconfig --list | grep snmpd to check whether the setting has been successful.

4) Verify the snmp service

(1) Use the snmpwalk command to view the host name of the localhost of this machine

(2) Use the snmptranslate command, Check whether the snmp tool can use

(3) to test whether the remote host can obtain data.

我这里登陆了另外一台Linux主机,该主机也按照上面的步骤安装好snmp服务及snmp工具。通过这台主机,获取远端主机的数据,这时需指定远端主机的IP地址

修改 SNMP 配置文件

1)配置文件路径

What does linux snmp service mean?

2)修改配置文件

What does linux snmp service mean?

重启 SNMP 服务

snmp 服务名 snmpd.service

# 启动/停止/查看 snmp 服务
systemctl start/stop/status snmpd.service

# 开启/禁用 snmp 自启动服务
systemctl enable/disable snmpd.service

使用 SNMP 软件获取 服务器信息

1)SNMP 中比较重要的配置

  • 读写设备的密码: 在 SNMP 中称为 读Community写Community
    若使用 SNMP v3 协议版本,则密码设置比较复杂,需要密码配对

  • 被读取的内容 :类似于被读取的参数的寄存器/地址,在 SNMP 中称为 OID      

    • OID的描述方式:类似IP地址,如1.3.6.1.4.1.2021.1.1

  • MIB文件:各厂商制作的,包含设备OID的配置文件

    • 利用 SNMP 调试软件加载 MIB 文件,即可快速调试,读写设备的相关信息

    • MIB 文件中包含丰富内容:参数、参数的描述(帮助/含义)、参数的类型(数据类型)、参数的 OID 地址等

    • 不同厂商可根据自己设备的特点,修改 MIB 文件,以添加专属的可用于 SNMP 协议的参数

    • 加载错误的 MIB 文件,则 MIB 文件中记录的 OID 可能在设备中查询不到返回值

2)使用的 MIB 文件
HOST-RESOURCE-MIBUCD-SNMP

  • HOST-RESOURCE-MIB用于查看主机(服务器)的基础状态信息
    主要包含.1.3.6.1.2.1.25中的信息,这部分内容大多数电脑、服务器都有

  • UCD-SNMP Linux 和 Unix 系统通用的 MIB 描述文件
    主要包含.1.3.6.1.4.1.2021中的信息

3)使用的 SNMP 软件

What does linux snmp service mean?

4)常用的 OID 地址


What does linux snmp service mean?

What does linux snmp service mean?

相关推荐:《Linux视频教程

The above is the detailed content of What does linux snmp service mean?. For more information, please follow other related articles on the PHP Chinese website!

Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
什么是linux设备节点什么是linux设备节点Apr 18, 2022 pm 08:10 PM

linux设备节点是应用程序和设备驱动程序沟通的一个桥梁;设备节点被创建在“/dev”,是连接内核与用户层的枢纽,相当于硬盘的inode一样的东西,记录了硬件设备的位置和信息。设备节点使用户可以与内核进行硬件的沟通,读写设备以及其他的操作。

Linux中open和fopen的区别有哪些Linux中open和fopen的区别有哪些Apr 29, 2022 pm 06:57 PM

区别:1、open是UNIX系统调用函数,而fopen是ANSIC标准中的C语言库函数;2、open的移植性没fopen好;3、fopen只能操纵普通正规文件,而open可以操作普通文件、网络套接字等;4、open无缓冲,fopen有缓冲。

linux中什么叫端口映射linux中什么叫端口映射May 09, 2022 pm 01:49 PM

端口映射又称端口转发,是指将外部主机的IP地址的端口映射到Intranet中的一台计算机,当用户访问外网IP的这个端口时,服务器自动将请求映射到对应局域网内部的机器上;可以通过使用动态或固定的公共网络IP路由ADSL宽带路由器来实现。

什么是linux交叉编译什么是linux交叉编译Apr 29, 2022 pm 06:47 PM

在linux中,交叉编译是指在一个平台上生成另一个平台上的可执行代码,即编译源代码的平台和执行源代码编译后程序的平台是两个不同的平台。使用交叉编译的原因:1、目标系统没有能力在其上进行本地编译;2、有能力进行源代码编译的平台与目标平台不同。

linux中eof是什么linux中eof是什么May 07, 2022 pm 04:26 PM

在linux中,eof是自定义终止符,是“END Of File”的缩写;因为是自定义的终止符,所以eof就不是固定的,可以随意的设置别名,linux中按“ctrl+d”就代表eof,eof一般会配合cat命令用于多行文本输出,指文件末尾。

linux怎么查询mac地址linux怎么查询mac地址Apr 24, 2022 pm 08:01 PM

linux查询mac地址的方法:1、打开系统,在桌面中点击鼠标右键,选择“打开终端”;2、在终端中,执行“ifconfig”命令,查看输出结果,在输出信息第四行中紧跟“ether”单词后的字符串就是mac地址。

linux怎么判断pcre是否安装linux怎么判断pcre是否安装May 09, 2022 pm 04:14 PM

在linux中,可以利用“rpm -qa pcre”命令判断pcre是否安装;rpm命令专门用于管理各项套件,使用该命令后,若结果中出现pcre的版本信息,则表示pcre已经安装,若没有出现版本信息,则表示没有安装pcre。

linux中rpc是什么意思linux中rpc是什么意思May 07, 2022 pm 04:48 PM

在linux中,rpc是远程过程调用的意思,是Reomote Procedure Call的缩写,特指一种隐藏了过程调用时实际通信细节的IPC方法;linux中通过RPC可以充分利用非共享内存的多处理器环境,提高系统资源的利用率。

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
Repo: How To Revive Teammates
4 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌

Hot Tools

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

Atom editor mac version download

Atom editor mac version download

The most popular open source editor

WebStorm Mac version

WebStorm Mac version

Useful JavaScript development tools

ZendStudio 13.5.1 Mac

ZendStudio 13.5.1 Mac

Powerful PHP integrated development environment