Home >Common Problem >What are the functions and functions of the lm393 chip?

What are the functions and functions of the lm393 chip?

藏色散人
藏色散人Original
2023-02-21 16:52:5311339browse

The functions and functions of the lm393 chip are: 1. The output load resistor can be connected to any power supply voltage within the allowable power supply voltage range, and is not limited by the Vcc terminal voltage value. The sink current of the output part may be obtained is limited by the drive and the β value of the device; 2. When the limit current of 16mA is reached, the output transistor will exit and the output voltage will rise quickly; 3. The output saturation voltage is limited by the γSAT of the output transistor of approximately 60ohm, when the load current is small , the low offset voltage of the output transistor (approximately 1.0mV) allows the output to be clamped at zero level.

What are the functions and functions of the lm393 chip?

#The operating environment of this tutorial: Windows 10 system, Dell G3 computer.

What are the functions and functions of the lm393 chip?

LM393 Introduction:

LM393 is a dual voltage comparator integrated circuit.

The output load resistor can be connected to any power supply voltage within the allowable power supply voltage range, and is not limited by the Vcc terminal voltage value. This output can be used as a simple SPS open circuit to ground (when no load resistor is used) being used), the sink current in the output section is limited by the available drive and the beta value of the device. When the limit current (16mA) is reached, the output transistor will exit and the output voltage will quickly rise.

Main features:

The features of this circuit are as follows:

Operating temperature range: 0°C -- 70°C

SVHC (Substances of Very High Concern): No SVHC (18-Jun-2010)

Device number: 393

The working power supply voltage range is wide, single power supply and dual power supply can work, single power supply: 2~36V, dual power supply: ±1~±18V;

Small current consumption, ICC=0.4mA;

Small input offset voltage, VIO=±2mV;

The common mode input voltage range is wide, VIC=0~VCC-1.5V;

The output is compatible with TTL, DTL, MOS, CMOS, etc.;

The output can be connected with an open collector "OR" Door;

Surface mount device: Surface mount

Main functions

LM393 package shape

The output load resistor can be connected at On any supply voltage within the allowable supply voltage range, it is not limited by the voltage value of the Vcc terminal. The sink current of the output part is limited by the possible drive and the β value of the device. When the limit current (16mA) is reached, the output transistor will exit and the output voltage will rise quickly. The output saturation voltage is limited by the γSAT of the output transistor of approximately 60ohm. When the load current is small, the output transistor's low offset voltage (approximately 1.0mV) allows the output to be clamped to zero level.

What are the functions and functions of the lm393 chip?

For more related knowledge, please visit the FAQ column!

The above is the detailed content of What are the functions and functions of the lm393 chip?. For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn