search
HomeOperation and MaintenanceLinux Operation and MaintenanceWhat is the difference between FTP and sftp in linux?

Difference: 1. The link methods are different. FTP uses the "control connection" on TCP port 21 to establish a connection, while SFTP establishes a connection through the SSH protocol (TCP port 22); 2. SFTP uses encryption and decryption technology for transmission Data security is higher than FTP; 3. The transmission efficiency of SFTP is lower than FTP.

What is the difference between FTP and sftp in linux?

#The operating environment of this tutorial: linux5.9.8 system, Dell G3 computer.

The two most commonly used file transfer methods in actual Linux project development are ftp and sftp, but what are the characteristics of these two transmission methods? This article will discuss the differences between SFTP and FTP next.

1. FTP protocol

FTP is one of the protocols in the TCP/IP protocol group. The TP protocol consists of two parts:

  • FTP server (used to store files)

  • FTP client (users can use the FTP client to access files located on the FTP server through the FTP protocol Resources)

By default, the FTP protocol uses TCP ports 20 and 21. Port 21 is used to transmit control information, and whether to use 20 as the port to transmit data is related to the transmission mode used by FTP. If passive mode is used, the specific port to be used must be decided by negotiation between the server and the client. FTP transfer modes are divided into the following two types:

  • Active mode (Port)

  • Passive mode (Passive)

1. Active mode

What is the difference between FTP and sftp in linux?

The FTP client first establishes a connection with the TCP21 port of the FTP server and sends commands through this channel. When the end needs to receive data, it sends a PORT command on this channel. The PORT command contains the port used by the client to receive data. When transmitting data, the server connects to the client's designated port through its own TCP 20 port to send data.

2. Passive mode

What is the difference between FTP and sftp in linux?

#The establishment of a control channel is similar to the active mode, but the Pasv command is used after the connection is established. After receiving the Pasv command, the FTP server randomly opens a high-end port (the port number is greater than 1024) and notifies the client of the request to transmit data on this port. The client connects to this port of the FTP server, establishes the channel through a three-way handshake, and then the FTP server Data is transmitted through this port.

Note: Many firewalls are not allowed to accept externally initiated connections when they are set up, so many FTP servers located behind the firewall or on the intranet do not support PASV mode because the client cannot open FTP through the firewall. The high-end port of the server; many clients on the internal network cannot log in to the FTP server in PORT mode because the TCP 20 from the server cannot establish a new connection with the client on the internal network, causing it to fail to work.

SFTP protocol

SFTP is the abbreviation of SSH File Transfer Protocol, a secure file transfer protocol. SFTP has almost the same syntax and functionality as FTP. SFTP is part of SSH and is a secure way to transfer files to Blogger servers. In fact, the SSH software package already contains a secure file information transfer subsystem called SFTP. SFTP itself does not have a separate daemon. It must use the sshd daemon (the default port number is 22) to complete the corresponding connection and reply. Operation, so in a sense, SFTP is not like a server program, but more like a client program.

Main differences between SFTP and FTP

Linking method: FTP uses a control connection on TCP port 21 to establish a connection. However, SFTP is a secure connection established between the client and server through the SSH protocol (TCP port 22) to transfer files.

Security: SFTP uses encryption to transmit authentication information and transmitted data, so using SFTP is very secure compared to FTP.

Efficiency: SFTP is a transmission method that uses encryption and decryption technology, so the transmission efficiency is much lower than ordinary FTP.

Related recommendations: "Linux Video Tutorial"

The above is the detailed content of What is the difference between FTP and sftp in linux?. For more information, please follow other related articles on the PHP Chinese website!

Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
The Building Blocks of Linux: Key Components ExplainedThe Building Blocks of Linux: Key Components ExplainedApr 30, 2025 am 12:26 AM

The core components of the Linux system include the kernel, file system, and user space. 1. The kernel manages hardware resources and provides basic services. 2. The file system is responsible for data storage and organization. 3. Run user programs and services in the user space.

Using Maintenance Mode: Troubleshooting and Repairing LinuxUsing Maintenance Mode: Troubleshooting and Repairing LinuxApr 29, 2025 am 12:28 AM

Maintenance mode is a special operating level entered in Linux systems through single-user mode or rescue mode, and is used for system maintenance and repair. 1. Enter maintenance mode and use the command "sudosystemctlisolaterscue.target". 2. In maintenance mode, you can check and repair the file system and use the command "fsck/dev/sda1". 3. Advanced usage includes resetting the root user password, mounting the file system in read and write mode and editing the password file.

Linux Maintenance Mode: Understanding the PurposeLinux Maintenance Mode: Understanding the PurposeApr 28, 2025 am 12:01 AM

Maintenance mode is used for system maintenance and repair, allowing administrators to work in a simplified environment. 1. System Repair: Repair corrupt file system and boot loader. 2. Password reset: reset the root user password. 3. Package management: Install, update or delete software packages. By modifying the GRUB configuration or entering maintenance mode with specific keys, you can safely exit after performing maintenance tasks.

Linux Operations: Networking and Network ConfigurationLinux Operations: Networking and Network ConfigurationApr 27, 2025 am 12:09 AM

Linux network configuration can be completed through the following steps: 1. Configure the network interface, use the ip command to temporarily set or edit the configuration file persistence settings. 2. Set up a static IP, suitable for devices that require a fixed IP. 3. Manage the firewall and use the iptables or firewalld tools to control network traffic.

Maintenance Mode in Linux: A System Administrator's GuideMaintenance Mode in Linux: A System Administrator's GuideApr 26, 2025 am 12:20 AM

Maintenance mode plays a key role in Linux system management, helping to repair, upgrade and configuration changes. 1. Enter maintenance mode. You can select it through the GRUB menu or use the command "sudosystemctlisolaterscue.target". 2. In maintenance mode, you can perform file system repair and system update operations. 3. Advanced usage includes tasks such as resetting the root password. 4. Common errors such as not being able to enter maintenance mode or mount the file system, can be fixed by checking the GRUB configuration and using the fsck command.

Maintenance Mode in Linux: When and Why to Use ItMaintenance Mode in Linux: When and Why to Use ItApr 25, 2025 am 12:15 AM

The timing and reasons for using Linux maintenance mode: 1) When the system starts up, 2) When performing major system updates or upgrades, 3) When performing file system maintenance. Maintenance mode provides a safe and controlled environment, ensuring operational safety and efficiency, reducing impact on users, and enhancing system security.

Linux: Essential Commands and OperationsLinux: Essential Commands and OperationsApr 24, 2025 am 12:20 AM

Indispensable commands in Linux include: 1.ls: list directory contents; 2.cd: change working directory; 3.mkdir: create a new directory; 4.rm: delete file or directory; 5.cp: copy file or directory; 6.mv: move or rename file or directory. These commands help users manage files and systems efficiently by interacting with the kernel.

Linux Operations: Managing Files, Directories, and PermissionsLinux Operations: Managing Files, Directories, and PermissionsApr 23, 2025 am 12:19 AM

In Linux, file and directory management uses ls, cd, mkdir, rm, cp, mv commands, and permission management uses chmod, chown, and chgrp commands. 1. File and directory management commands such as ls-l list detailed information, mkdir-p recursively create directories. 2. Permission management commands such as chmod755file set file permissions, chownuserfile changes file owner, and chgrpgroupfile changes file group. These commands are based on file system structure and user and group systems, and operate and control through system calls and metadata.

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

Atom editor mac version download

Atom editor mac version download

The most popular open source editor

VSCode Windows 64-bit Download

VSCode Windows 64-bit Download

A free and powerful IDE editor launched by Microsoft

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

SublimeText3 English version

SublimeText3 English version

Recommended: Win version, supports code prompts!

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor