What is standby button?

Standby is the standby button in the audio. Many speakers are equipped with this button. After the power is plugged in, it does not power on immediately, but in the standby state. Press it again to turn on the power and start working; design standby Buttons can be used for remote control operation conveniently. In standby mode, remote control power on, power off and other operations can be realized.

Recommendation: " Programming Video"

standby: means to be on call.

Many speakers are equipped with this button. After the power is plugged in, it does not power on immediately, but in a standby state. Press it again to turn on the power and start working.

This button is designed to facilitate remote control operation. In the standby state, remote control power on, power off and other operations can be realized, which is more user-friendly.

Extended information

Precautions for using audio

1. Put the equipment in the cabinet. Some people put equipment into custom-made cabinets for decoration and protection. This will cause latent vibrations caused by the space inside the cabinet to make the sound turbid. Equipment such as power amplifiers will easily overheat and age due to insufficient air circulation. If the speaker is installed into the wall, the sound effect will become stiff.

2. Stack equipment. Many people like to place DVD players, amplifiers, tuners, digital-to-analog converters and other machines on top of each other, which will cause mutual interference. Especially if laser cameras and power amplifiers interfere seriously, the sound will be hard and depressing. The correct approach is to place the equipment on a speaker stand designed by the factory.

3. The power plug does not distinguish between positive and negative. A good system that handles the positive and negative aspects of the power plug will have clear and natural timbre; if the positive and negative are inconsistent or uneven, the timbre will be hard and rough.

4. The wiring is not secure and dirty. If the system sounds dry and hard, one of the reasons may be poor contact, such as a weak plug, oxidation of the contact surface, dust or oil stains, etc. Therefore, you should check frequently to keep the contact surface clean.

5. Use marble or glass to carry equipment. Marble has low density and high resonance, which will affect the sound effect. The density of glass is higher than that of marble, but it is not thick and the resonance is more severe. Granite or granite can be used, especially granite, which has the highest density and is ideal for carrying equipment, but the thickness should be more than 3 cm.

6. The placement of speakers should be adjusted to local conditions. Some people have other furniture in the room and adjust the position of the speakers to match the furniture. The correct listening distance should be determined first, and then the speaker should be placed 1/3 between the seat and the opposite wall. The distance between the speakers should be 0.7 times the direct distance between the listener and the speaker. The height should be flush with the listener's ears and the tweeter. .

The above is the detailed content of What is standby button?. For more information, please follow other related articles on the PHP Chinese website!