What should I do if my win10 blue screen cannot repair itself?

Solution to the problem that win10 blue screen cannot repair itself: 1. Keep clicking the F8 key while booting, enter the system operation menu, select "Last Known Good Configuration", and restart the computer; 2. Find the "System Restore Dialog Box" and select "Restore my computer to an earlier time"; 3. Long press the power button and try to restart.

Solution to win10 blue screen that cannot repair itself:

First, try to repair the operating system:

Method 1. Turn on the computer and keep clicking the F8 key to enter the system operation menu (if it is Win8, Win8.1, Win10 system, after seeing the startup screen, long press the power button to shut down , repeat it about three times in a short period of time to enter WinRE {Windows Recovery Environment}, but some users may need to disconnect the power directly. In this way, the advanced recovery interface should appear after booting), select "Last Known Good Configuration" and restart the computer , see if it can be solved.

Method 2, Turn on the computer and keep clicking the F8 key to enter the system operation menu (if it is Win8, Win8.1, Win10 system, after seeing the startup screen, long press the power button to shut down, and then Repeat this about three times to enter WinRE {Windows Recovery Environment}, but some users may need to disconnect the power directly. In this way, the advanced recovery interface should appear after booting), then look for "Safe Mode" and enter "Safe Mode" , if you can successfully enter, click "Start" → "All Programs" → "Accessories" → "System Tools" → "System Restore", the "System Restore Dialog Box" will appear, select "Restore my computer to an earlier time". In this way, you can use the system restore function that comes with the Windows system to restore to a restore point when it could boot normally. (If any)

Method 3, Try electrostatic discharge treatment. After shutting down, remove the power cord and battery from your computer; press and hold the power button (more than 30 seconds), and then try to turn it back on.

Method 4, Use the system installation CD or system installation U disk, put it into the CD-ROM drive or insert it into the USB interface, restart the computer, enter the CD installation system state or enter the U disk installation system state, wait until After the startup interface flashes, do not choose to install the system, but choose to repair the system. Repair the current system (it may run for a long time, maybe 2-4 hours), wait patiently for the repair to be completed, and see if the problem can be solved. (At the end of this article, details are given: How to set the U disk as the first boot device)

If the above 4 methods are invalid, you can only reinstall the system.

2. Check if it is a hardware problem:

1) There is a problem with the motherboard: the BIOS is out of power and cannot remember the hard disk information. If your system date is not If correct, this is probably the reason.

Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard drive.

2) The IDE cable is of poor quality or not plugged firmly.

Solution: Change an IDE cable or plug the IDE cable into another IDE slot on the motherboard. Do not connect the hard disk cable with other IDE devices, such as optical drives. Separate the two IDE cables and connect them correctly. Master/slave disk.

3) Enter the BIOS to set up the hard disk startup (see if the setting is wrong).

4) There is another situation where the memory is loose. Re-plugging it and cleaning it can also solve the problem (sometimes it is caused by it).

5) In addition, graphics card driver conflicts will cause a blue screen and cause the system to be unable to enter, and the graphics card driver needs to be updated.

6) The hard disk has suffered a serious failure and is damaged. The hard disk may need to be replaced.

7) Memory damage will also cause the computer to fail to boot and the memory needs to be replaced.

8) If the graphics card is damaged, replace the graphics card.

9) The motherboard is damaged and must be replaced.

10) Too much dust on the machine will cause heat dissipation problems. The computer must be cleaned and dusted, or a heat dissipation device must be added.

11) If you can't solve it yourself, it is recommended to go to a computer store for maintenance.

Related learning recommendations: windows server operation and maintenance tutorial

The above is the detailed content of What should I do if my win10 blue screen cannot repair itself?. For more information, please follow other related articles on the PHP Chinese website!