How to manually set IP address and DNS

How to manually set the IP address and DNS?

In the lower right corner of the desktop, right-click the small computer and select "Open Network and Sharing Center"

In the window that opens, click " Ethernet”

#Sometimes you may see multiple network card options. Be sure to confirm which one you modify. WLAN is a wireless network card and Ethernet is a wired network card

In the pop-up window, click "Details" to view the current IP address and DNS information, modify the IP address, and click "Properties"

As shown in the picture below, select "Internet Protocol Version 4", and then click "Properties"

As shown in the picture below, select "Use the following ip address" , the following DNS will automatically switch to "Use the following DNS server address"

#You can also set the DNS separately, and the IP address will remain automatically obtained. Enter the DNS address. Can. Introducing several common public DNS addresses: 8.8.8.8, 114.114.114.114, 223.5.5.5, 223.6.6.6

##The configuration format is as shown in the figure below. DNS can be configured with one , you can also configure two, click OK after the configuration is completed

The above is the detailed content of How to manually set IP address and DNS. For more information, please follow other related articles on the PHP Chinese website!