How to solve the 00000024 blue screen

00000024 How to solve the blue screen?

The phenomenon of blue screen and 0x00000024 code appearing when the computer is turned on is not common in today’s computers. Generally, this situation is very common in computers with XP system. Usually, the reason why a blue screen appears when the computer starts up and the 0x00000024 code appears is largely related to the improper operations we performed on the computer before the last shutdown. Therefore, when the computer starts up with a blue screen and the 0x00000024 code appears, we don’t need to worry too much.

Method 1:

Step 1: Let’s start the computer first and press on the keyboard when the system startup screen is about to appear. "F8" shortcut key to enter the boot menu options, you can try to enter "Safe Mode". If you successfully enter, the blue screen problem may be caused by the installation of certain programs (such as anti-virus software) or drivers. Uninstall the last program or driver installed before the failure and restart the system, and you should be able to enter normally.

Step 2: If the above method is ineffective and you cannot even enter the safe mode with the same blue screen, then you need to use the PE system on the boot USB disk or CD to help. After entering the PE system, First scan the hard drive to check whether there are bad sectors on the hard drive causing a blue screen. Usually, if the hard disk itself fails, it is more likely to cause 00000024 failure. If a hard disk failure is detected, it is recommended to replace it or return it to the factory for warranty as soon as possible during the warranty period.

Method 2:

1. Use the Finaldata file recovery tool that comes with the PE system to scan the C drive. There is no need to wait for it to finish scanning. It will stop in about five minutes. At this time, you will find that the C drive can be read directly (in fact, I later discovered that this step of scanning the disk can sometimes be omitted, and there is no such step in method 2). Open CMD, run the chkdsk c: /f command (note the space), and complete After restarting the system, you can log in normally. Some PE systems come with fewer tools, may not have Finaldata tools, and may not support the Chkdsk command. You can use the following method.

2. Copy the Chkdsk.exe program from other XP computers, or use the Expand command to extract the Chkdsk.ex_ file from the system installation disk, copy the program to a partition other than the system disk, and use the system Boot the installation disk to the recovery station, run the Chkdsk c: /f command, and then restart the system to log in.

The above is the detailed content of How to solve the 00000024 blue screen. For more information, please follow other related articles on the PHP Chinese website!