How to install the system in pe mode

How to install the system in pe mode?

The installation method of the system in CD-ROM PE mode is as follows:

1. Turn on the computer and press the Delete key during the computer self-test. (Note: Some computers use the Enter and F1 keys) .

#2. After entering the CMOS interface, use the left and right keys on the keyboard to select the Startup option.

3. Select the first option after 1st Boot, press the Enter key, and select the optical drive model of your computer in the interface that appears. The one with the words DVDROM is usually Optical drive.

#4. After returning to the interface, press the F10 key on the keyboard.

#5. The computer will prompt you whether to save the settings, select the Yes option and press the Enter key.

#6. Put the CD into the CD-ROM drive, restart the computer, and after a while you will enter the CD-ROM drive installation interface.

#7. The serial number of the first item installed to the C drive is 1. Press the numeric key 1 on the keyboard.

#8. The computer will automatically install the operating system to the C drive. I just need to wait quietly.

#9. In the installation interface, select 2 to enter the PE system.

10. After opening Ghost, select the Local---->Partition---->From Image option, as shown in the figure below.

11. Select the installation file path and installation file, as shown in the figure below.

#12. Select the drive letter to install the system software, click OK and the operating system will start to be installed on the computer.

The above is the detailed content of How to install the system in pe mode. For more information, please follow other related articles on the PHP Chinese website!