This problem may occur because: There are many possible causes, ranging from calibration to hardware or firmware. Troubleshooting can find the root cause.
#1. Clean the screen
Clean the screen by moistening a soft lint-free cloth with water or eyeglass cleaning fluid, but do not directly Spray liquid on the screen.
2. Restart Surface
Note: You will need to connect a keyboard or mouse to Surface. You can use the Surface Type Cover or a USB or Bluetooth keyboard or mouse.
Sometimes just a reboot is needed to get your touch screen back to normal:
In Windows 10/8.1:
1). Press the Windows logo key. (If you are using a mouse, select Start.)
2). Press the Tab key and the arrow keys to select Power, and then press Enter. (Using your mouse, select Power.)
3). Use the arrow keys to highlight Restart and press Enter. (Using your mouse, select Restart.)
3. Install the latest updates
Note: You will need a keyboard or mouse connected to your Surface, as in the solution 2 in.
The touch screen may not work because it does not have the latest updates. Please follow the steps below to check for updates. If your Surface doesn't restart automatically after you install the update, restart it manually. To restart your Surface, go to Start, select Power > Restart.
In Windows 10:
1). Press the Windows logo key. (If you are using a mouse, select "Start.")
2). Press the Tab key and the arrow keys to select "Settings" and press Enter. (Using your mouse, select "Settings.")
3.) Select "Update & Security" and click "Check for Updates."
In Windows 8.1:
1). Press the Windows logo key. (If you are using a mouse, select "Start.")
2). Press the Tab key and the arrow keys to select "Settings" and press Enter. (Using the mouse, select "Settings.")
3). Select "Update & Recovery" > "Windows Update" > "Check Now."
4. Force shutdown
1). Press and hold the power button until the screen turns off (about 10 seconds), then release the power button.
2). Press and release the power button to turn Surface back on. You should see the Surface or Windows logo.
If that doesn't work, use this two-button shutdown process to ensure your Surface shuts down completely (not applicable to Surface RT, Surface 2, and Surface 3).
Here's how:
1). Press and hold the power button on your Surface for 30 seconds, then release the button.
2). Press and hold the volume up button and power button simultaneously for at least 15 seconds, then release them. The screen may flash the Surface logo, but continue to hold both buttons for at least 15 seconds.
3). After turning on the button, wait 10 seconds.
4). Press and release the power button to turn your Surface back on. You should see the Surface logo.
5. Disable and enable the touch screen driver
Note: You will need a keyboard or mouse connected to the Surface, as in Solution 2.
If the two-button shutdown does not work, please try:
In Windows 10:
1). Select the search box in the taskbar and enter "Device Manager" , then select Device Manager in the search results.
2). Select the arrow pointing to the left of "Human Interface Device".
3). Right-click "HID Compatible Touch Screen" and select "Disable".
4). Right-click "HID Compatible Touch Screen" and select "Enable".
NOTE: This may be more than one HID compatible touchscreen listed. If so, complete steps 3-4 for each.
In Windows 8.1:
1). Press the Windows logo key. (If you are using a mouse, select "Start").
2). Press the Tab key and the arrow keys to select "Settings" and then press Enter. (Using your mouse, select "Settings").
3). Enter "Device Manager" in the search box, and then select "Device Manager" in the search results.
6. Reinstall the touch screen driver
Note: You will need a keyboard or mouse connected to the Surface, as in Solution 2
If Disabling and then re-enabling your touch screen driver does not work, please try the following:
1). Select the search box in the taskbar, enter "Device Manager" and then select "Device Management" in the search results device". Same as solution 5.
2). Select the arrow pointing to the left of "Human Interface Device". Same as solution 5.
3). Right-click "HID Compatible Touch Screen" and select "Uninstall".
NOTE: This may be more than one HID compatible touchscreen listed. If so, complete steps 3-4 for each.
4). Restart Surface.
When you are connected to the Internet, your Surface will automatically download and install the touchscreen driver.
7. Download driver package
If you find that there is no "HID standard compliant touch screen" driver in the device manager, you need to download the corresponding version of the driver package for surface to install it. To learn how, see the following link:
https://support.microsoft.com/zh-cn/help/4023482/surface-download-drivers-and-firmware-for-surface
8. Reset Touchscreen Calibration
Note: You will need a keyboard or mouse connected to the Surface, as in Solution 2.
If solutions 1-7 don't work, recalibrate the touch screen:
1). Press the Windows logo key. (If you are using a mouse, select Start.)
2). Type "Calibrate," use the arrow keys to highlight "Calibrate screen for pen and touch input," and then press Enter. (When using a mouse, select Calibrate screen for pen and touch input.)
3). Press the Tab key until the Reset button is selected, and then press Enter. (When using a mouse, select Reset.)
If the Reset button is grayed out, your Surface touch calibration remains at factory settings. Go to "Solution 9".
4). Press the Tab key until the Yes button is selected, press Enter, and follow the on-screen instructions. (When using a mouse, select Yes and follow the on-screen instructions.)
5). After your Surface deletes the recalibration data, test the touchscreen to see if it responds appropriately.
9. Check for electromagnetic interference
Sometimes other nearby electronic devices can interfere with the touch screen, or cause the cursor on your Surface to move around unexpectedly. The interference may be as simple as a nearby power strip or desk lamp, or it may be something like a large piece of equipment or a row of computers.
1). To determine if this is the problem, move your Surface to another room, another building, or outside. If the touchscreen problem occurs only in specific locations, there may be electrical interference.
2). Turn off all other devices in the area and turn them on one by one to identify the device causing the problem.
3). If no interfering device is found, check whether there is a more powerful device in the next room causing electronic interference.
10. Restore or reset your Surface
Note: You will need a keyboard or mouse connected to your Surface, as in Solution 2.
If you are still having issues with your touchscreen, try restoring or resetting your Surface.
11. Get your Surface serviced
If the touch screen still doesn't work after following these steps, your Surface needs service.
For more FAQ, please visit the PHP Chinese website.
The above is the detailed content of What should I do if the touch screen of surface pro7 is not responding?. For more information, please follow other related articles on the PHP Chinese website!

是否有一台无法校准或无法工作的Windows11触摸屏笔记本电脑?这可能令人沮丧,尤其是在唯一访问选项是通过触摸屏的设备的情况下。虽然Windows触摸屏设备以其流畅的功能而闻名,尤其是对于图形要求高的应用程序,但有时可能会出错。您可能会遇到诸如触摸屏无法正常工作或有时Windows11触摸屏根本无法校准等问题。虽然我们已经介绍了如何在Windows10上校准触摸屏,但在这里我们将讨论一些在Windows11触摸屏无法校准时可能对您有所帮助的解决方案。触摸屏是否适用于Wind

得益于为WindowsInkWorkspace专门设计的触控优化应用程序,Windows11是一个出色的触摸屏平台。今天我们将解决LGGram17触摸屏不工作错误,以便您可以重新开始使用该功能。大多数问题是由驱动程序和操作系统之间的不兼容引起的。如果更新到Windows11后触摸屏停止工作,这种情况发生的可能性会更大。为了解决LGGram17触摸屏无法正常工作的问题,以下部分将介绍这一点以及其他故障排除解决方案。接下来,我们将首先更详细地了解使用触摸屏PC的优势。使用

如何在Windows11中使用设备管理器禁用触摸屏要使用设备管理器禁用Windows11中的触摸屏,请执行以下步骤:单击“开始”按钮或按Windows键打开“开始”菜单。在开始菜单中,键入设备管理器,然后选择最佳匹配结果。当设备管理器窗口打开时,展开人机接口设备部分。接下来,从列表中找到符合HID标准的触摸屏。右键单击并从弹出菜单中选择禁用设备。当验证对话框出现时,单击是按钮。此时,您的触摸屏已禁用——无需重新启动。如何在Windows11中使用设备管理器启用触摸屏如果您以

Windows10针对触摸屏显示器进行了优化,但就像任何新操作系统一样,各种操作系统设置之间可能存在一些不兼容。例如,用户报告他们无法校准他们的触摸屏。因此,在本文中,我们将指导您解决此问题。我们正在解决任何Windows10设备的用户,但我们确实有一篇单独的文章专门针对笔记本电脑解决屏幕校准问题。随意也检查一下。如何在Windows10上校准触摸屏?显然,您首先要充分利用本机Windows工具。因此,您需要尝试的第一件事就是运行内置的疑难解答程序。以下是如何做到这一点:在主屏幕搜索栏

触摸屏PC的一个罕见错误是鬼泡效果。发生这种情况时,计算机会在屏幕上闪烁气泡点,而鼠标光标会在它们周围弹跳。如果你的电脑当前遇到幽灵触摸气泡,本文将为您提供最佳步骤,以帮助您摆脱 Windows PC 中的幽灵触摸气泡。在本文中是什么原因导致Windows中的鬼气泡?幽灵气泡在Windows中非常罕见。以下是 Windows 中出现鬼气泡的一些常见原因:错误的 Windows 更新 – 安装更新后,您可能会注意到 PC 中的幽灵触摸气泡。卸载或回滚更新将有助于解决错误。屏幕硬件故障 – 在某些情

如果我们的电脑支持平板模式,那么可以直接切换来开启触摸屏,要是不支持呢,其实也是可以使用win11触摸键盘的,不过无法达到触摸屏的效果。win11开启触摸屏教程:1、首先点击底部开始菜单,如图所示。2、接着打开开始菜单中的“设置”3、然后点击左边栏的“个性化”设置。4、随后在右边找到并打开“触摸键盘”5、打开后就能在其中开启触摸键盘了。。

使用win7系统时,电脑插入耳机没有反应。为什么插入电脑耳机没用?怎样解决?今天,小编将与大家分享win7插入耳机没有反应的处理方法。如果你想知道,就跟着小编往下看。win7插入耳机没有反应怎么办1.首先,在桌面上找到计算机按钮右击,在第二列表中找到管理选项;2.计入计算机管理窗口后,首先找到设备管理器按钮并点击,然后右侧找到声音、音频和游戏控制器选项。确认声卡驱动没有问题,返回桌面;3.将耳机插入耳机孔,打开控制面板窗口,找到Realtek高清音频管理器选项并点击;4.在Realtek高清音频

电脑触摸板失灵的原因:1、开关未打开,可以按下键盘上的“Fn+F10”组合键开启;2、设置错误,打开“开始菜单”,点击“齿轮”,进入“设置”,找到“设备”,点击“触摸板”选项,再点击“连接鼠标时让触摸板保持打开状态”选项;3、驱动错误,因为系统或驱动被病毒和木马破坏导致的,拨打售后电话或直接去电脑售后进行维修;4、触摸板损坏,将水倒在触摸板上,导致电脑进水损坏触摸板等等。

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

Dreamweaver Mac version
Visual web development tools

ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment

Atom editor mac version download
The most popular open source editor

SublimeText3 Linux new version
SublimeText3 Linux latest version
