Lenovo computer automatic repair failed

1)Press F8 immediately after booting until the advanced options appear, let go, select "Last Known Good Configuration" and press Enter to repair. If it still doesn't work, press F8 to enter safe mode and restore. Reinstall the system or reinstall the system (if reinstallation also crashes or repairs the system, it is recommended to perform maintenance. If you can enter safe mode, it means you have installed inappropriate things. Uninstall all inappropriate things downloaded before the accident, or restore the system. or reinstall). (Recommended learning: web front-end video tutorial)

First soft and then hard. Such problems are caused by software conflicts, inappropriate drivers, and system problems. You can use the safe mode Restore the system, and if it still doesn't work, reinstall the operating system. Do not install software, patches, drivers, etc., and see if there are still problems with booting. If you do not install drivers, patches, and software step by step, do not install anything that is inappropriate. .

If it is caused by hardware, take out the motherboard battery and let it go for a while, plug in and out the memory, clean the graphics card, and check if there is any problem with the hard disk. If it doesn't work, go get it repaired.

2) If this is always the case, reinstall the operating system first with software and then with hardware. Do not install software, patches, drivers, etc. and see if there are still problems with booting? If you have not installed drivers, patches, etc. step by step, Software, if you find anything inappropriate, don’t install it (please ask me if you have any questions).

Please note: If you install drivers, patches, software, etc. after restoring the system or reinstalling, be sure not to install the things that affected your accident this time, otherwise the restoration or reinstallation will be in vain. .

3) In terms of hardware, whether there are problems with the hard disk, memory, etc., and whether the temperature of the CPU and other hardware is high. If it is caused by hardware problems, it is recommended to have them checked.

After entering the advanced settings, we can see that there are 6 options here. Basically, there is no solution by clicking Start Repair, but I suggest you give it a try first. If not, just follow my steps. We click on the System Restore option.

Then we can see that there are 2 options here. The first one is incomplete clearing and the second one is complete clearing. If you have important files, it is recommended to choose the first option. In this way, our computer files will still be stored in the computer. The second option is chosen here.

Here we can find that it is the deletion of the driver. Here we can choose to clear all files and clear all drivers, because it may be caused by the driver not matching the system.

Then select the option to completely clean the drive. The instructions above indicate that these files can be restored after deletion, but it is more troublesome.

Finally, we just click Initialize. After completion, the computer will restart. Then download the required files yourself. The editor won’t say much more.

A possible problem with this method is that the initialization is unsuccessful. How to solve this problem? One is to reinstall the system, and the other is to select startup settings in the advanced options.

The above is the detailed content of Lenovo computer automatic repair failed. For more information, please follow other related articles on the PHP Chinese website!