Operation and MaintenanceLinux Operation and MaintenanceHow to troubleshoot problems after the main program is interrupted abnormally or prompts that the migration is unsuccessful.
The content of this article is about how to troubleshoot problems after the main program is interrupted abnormally or the migration is unsuccessful. It has certain reference value. Friends in need can refer to it. I hope it will be helpful to you.
Troubleshooting
The cloud migration tool supports breakpoint recovery, and the file transfer process supports breakpoint resume transfer. Generally speaking, if the main program is interrupted abnormally or prompts that the migration is unsuccessful, after troubleshooting and solving the problem, you can run the main program again to resume the cloud migration work.
After successfully migrating Windows Server 2008 and above versions of Windows servers, after starting the instance, you need to use the Reset File Permission tool to repair the default file system permissions to ensure that the instance services and components are normal.
Log error message IllegalTimestamp
Please check whether the system time is the correct time.
Log error message UnKnownError
Please check whether the value of the parameter platform in the configuration file user_config.json is correct.
Log error prompt OperationDenied
When the log file prompts an error message such as rsync: send_files failed to open "…": Permission denied (13), it indicates that Alibaba Cloud Migration The cloud tool does not have permission to access the directory or folder, causing rsync to fail. At this time, you can filter the directory or folder by configuring rsync_excludes_linux.txt or Rsync/etc/rsync_excludes_win.txt, and then try again.
Log error message InvalidAccountStatus.NotEnoughBalance
The default payment mode of the transit instance is Pay-As-You-Go. When your account balance is insufficient , unable to successfully migrate to the cloud. You need to update your account status and try again.
Log error message Forbidden.RAM
The RAM account you are using does not have sufficient permissions to use the relevant API.
You need to be granted ECS and VPC access permissions AliyunECSFullAccess and AliyunVPCFullAccess. For more details, see the RAM documentation Authorization Policy Management.
Log error message InvalidImageName.Duplicated
The specified parameter image_name cannot be the same as your existing image name.
Log error message Connect to Server Failed
This error indicates that the transit instance cannot be connected. You can check by following these steps:
View log file details.
Check in sequence:
Whether the status of the transit instance is normal.
Is the local network service normal? The cloud migration tool needs to access communication ports 80, 443, 8703, and 8080. Please make sure that your server has released these ports.
After the problem is solved, run the main program again and try again.
Log error message Do Rsync Disk x Failed
This error indicates that the file transfer was interrupted. You can check by following these steps:
View error log file details. If return: 3072 or return: 7680 information prompts appear multiple times in the error log file, please confirm whether the source server database service or container service is not turned on, for example, services such as Oracle, MySQL, MS SQL Server, MongoDB, and Docker. You need to pause the service or exclude the relevant data file directories before migrating to the cloud.
Check
in sequence to see if the status of the transit instance is normal.
Is the local network service normal? The cloud migration tool needs to access communication ports 80, 443, 8703, and 8080. Please make sure that your server has released these ports.
After the problem is solved, run the main program again and try again.
Windows server is stuck at Prepare For Rsync Disk 0 stage
Windows server cloud migration is stuck at Prepare For Rsync Disk 0 stage. After checking the log file, it is found that VssSnapshotProperties::VssSnapshotProperties GetSnapshotProperties Failed: 0x80042308. At this time you can:
Enable the Volume Shadow Copy service:
Click Start in the server, enter service in the search box, and press Enter to confirm.
Find the Volume Shadow Copy service and click to start this service.
Uninstall the QEMU Guest Agent software:
Click Start on the server, enter services in the search box, and press Enter to confirm.
Check whether there is QEMU Guest Agent VSS Provider service. If there is no such service, you can directly re-run the cloud migration tool.
Find the uninstall script, which is probably located in the C:\Program Files (x86)\virtio\monitor\uninstall.bat directory, and execute the script to uninstall the QEMU Guest Agent software.
Rerun the cloud migration tool.
After migrating a Windows server, I am prompted to activate Windows when starting an instance?
You can reinstall Windows KMS Client Key and activate Windows services through KMS.
Remotely log in to the Windows instance.
Query the KMS Client Key corresponding to the Windows server on the Microsoft KMS Client Keys page, which is assumed to be xxxx-xxxx-xxxx-xxxx-xxxx.
Open the command line tool with administrator rights and run the following command:
slmgr /upk slmgr /ipk xxxx-xxxx-xxxx-xxxx-xxxx
Use KMS to activate Windows. For more details, please refer to ECS Windows system activation method in VPC environment.
After migrating a Windows server, you start the instance and find that the data disk is missing or the drive letter is confused?
If the data disk drive letter is missing, you can open Disk Manager and add it again.
Open Control Panel > System and Security > Administrative Tools > Computer Management.
Find and right-click the data disk with missing drive letter, and click Change drive and path.
Click Add and add the data drive letter.
If the data disk drive letter is wrong, you can open Disk Manager and change it again.
Open Control Panel > System and Security > Administrative Tools > Computer Management.
Find and right-click the data disk with missing drive letter, and click Change drive and path.
Click Change and change the data drive letter.
Linux server log error message check rsync failed
Please check whether the rsync component has been installed on the system.
Linux server log error message check virtio failed
Please check whether the virtio driver is installed on the system.
Linux server log error message check selinux failed
Please check whether SElinux has been disabled.
You can run setenforce 0 to temporarily turn off SELinux.
Linux server log error message Do Grub Failed
When the log file prompts an error message such as Do Grub Failed, make sure that the source server has installed the system boot program GRUB (GRand Unified Bootloader). You can install the system boot program GRUB of version 1.9 or above and try again.
After migrating a Linux server, you start the instance and find that there is no data in the original data disk directory?
After migrating a Linux server with a data disk, the data disk will not be mounted by default when starting the instance. You can run the ls /dev/vd* command after starting the ECS instance to view the data disk device, mount it manually according to actual needs, and edit /etc/fstab to configure automatic mounting at startup.
After migrating the Linux server, why can’t the instance created based on the custom image be started?
Check the driver. When creating an I/O optimized instance, make sure the source server has the virtio driver installed.
Check whether the source system boot configuration is correct.
If your source server system is CentOS 5 or Debian 7 with a lower kernel version, and the built-in GRUB program version is lower than 1.99, and you remotely connect to the ECS console to log in to the instance, you will find that the startup interface is as shown below Show.
You can install the system boot program GRUB of version 1.9 or above and try again.
After starting the Others Linux instance, the network service is not normal?
When importing Others Linux type image, Alibaba Cloud will not do any configuration work on the instance created by the custom image, including related network configuration, SSH configuration, etc. At this time, you need to modify the system-related network configuration yourself.
The above is the detailed content of How to troubleshoot problems after the main program is interrupted abnormally or prompts that the migration is unsuccessful.. For more information, please follow other related articles on the PHP Chinese website!
The 5 Core Components of the Linux Operating SystemMay 08, 2025 am 12:08 AMThe five core components of the Linux operating system are: 1. Kernel, 2. System libraries, 3. System tools, 4. System services, 5. File system. These components work together to ensure the stable and efficient operation of the system, and together form a powerful and flexible operating system.
The 5 Essential Elements of Linux: ExplainedMay 07, 2025 am 12:14 AMThe five core elements of Linux are: 1. Kernel, 2. Command line interface, 3. File system, 4. Package management, 5. Community and open source. Together, these elements define the nature and functionality of Linux.
Linux Operations: Security and User ManagementMay 06, 2025 am 12:04 AMLinux user management and security can be achieved through the following steps: 1. Create users and groups, using commands such as sudouseradd-m-gdevelopers-s/bin/bashjohn. 2. Bulkly create users and set password policies, using the for loop and chpasswd commands. 3. Check and fix common errors, home directory and shell settings. 4. Implement best practices such as strong cryptographic policies, regular audits and the principle of minimum authority. 5. Optimize performance, use sudo and adjust PAM module configuration. Through these methods, users can be effectively managed and system security can be improved.
Linux Operations: File System, Processes, and MoreMay 05, 2025 am 12:16 AMThe core operations of Linux file system and process management include file system management and process control. 1) File system operations include creating, deleting, copying and moving files or directories, using commands such as mkdir, rmdir, cp and mv. 2) Process management involves starting, monitoring and killing processes, using commands such as ./my_script.sh&, top and kill.
Linux Operations: Shell Scripting and AutomationMay 04, 2025 am 12:15 AMShell scripts are powerful tools for automated execution of commands in Linux systems. 1) The shell script executes commands line by line through the interpreter to process variable substitution and conditional judgment. 2) The basic usage includes backup operations, such as using the tar command to back up the directory. 3) Advanced usage involves the use of functions and case statements to manage services. 4) Debugging skills include using set-x to enable debugging mode and set-e to exit when the command fails. 5) Performance optimization is recommended to avoid subshells, use arrays and optimization loops.
Linux Operations: Understanding the Core FunctionalityMay 03, 2025 am 12:09 AMLinux is a Unix-based multi-user, multi-tasking operating system that emphasizes simplicity, modularity and openness. Its core functions include: file system: organized in a tree structure, supports multiple file systems such as ext4, XFS, Btrfs, and use df-T to view file system types. Process management: View the process through the ps command, manage the process using PID, involving priority settings and signal processing. Network configuration: Flexible setting of IP addresses and managing network services, and use sudoipaddradd to configure IP. These features are applied in real-life operations through basic commands and advanced script automation, improving efficiency and reducing errors.
Linux: Entering and Exiting Maintenance ModeMay 02, 2025 am 12:01 AMThe methods to enter Linux maintenance mode include: 1. Edit the GRUB configuration file, add "single" or "1" parameters and update the GRUB configuration; 2. Edit the startup parameters in the GRUB menu, add "single" or "1". Exit maintenance mode only requires restarting the system. With these steps, you can quickly enter maintenance mode when needed and exit safely, ensuring system stability and security.
Understanding Linux: The Core Components DefinedMay 01, 2025 am 12:19 AMThe core components of Linux include kernel, shell, file system, process management and memory management. 1) Kernel management system resources, 2) shell provides user interaction interface, 3) file system supports multiple formats, 4) Process management is implemented through system calls such as fork, and 5) memory management uses virtual memory technology.
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
DVWA
Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software
SublimeText3 English version
Recommended: Win version, supports code prompts!
Atom editor mac version download
The most popular open source editor
Notepad++7.3.1
Easy-to-use and free code editor
Safe Exam Browser
Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.
