search
HomeOperation and MaintenanceLinux Operation and MaintenanceHow to attach an elastic network card when creating an instance

The content of this article is about how to attach an elastic network card when creating an instance. It has certain reference value. Friends in need can refer to it. I hope it will be helpful to you.

Create an elastic network card

You can create an elastic network card in the following two ways:

Attach an elastic network card when creating an instance. In this way, a maximum of two elastic network cards can be attached, one as the primary network card and one as the secondary network card. The secondary network card created in this way will be released along with the instance if it is not detached from the instance.

Create an elastic network card separately. The created elastic network card can be attached to the instance. The elastic network card created through this method can only be used as a secondary network card.

This article describes how to create an elastic network card separately in the console.

Restrictions

There are the following restrictions on creating an elastic network card:

The elastic network card must belong to a switch (VSwitch) of a certain VPC .

The elastic network card must join at least one security group.

Prerequisites

Before creating an elastic network card, you must complete the following operations:

Create a dedicated server in the corresponding region There is a network (VPC) and a switch is created.

Create a security group under the specified private network.

Operation steps

Follow the following steps to create an elastic network card:

Log in to the ECS management console.

In the left navigation bar, select Network and Security > Elastic Network Adapter.

Select a region.

Click to create an elastic network card.

In the Create Elastic Network Card dialog box, complete the following settings:

Network card name: Set the elastic network card name as prompted.

Private network: Elastic network cards can only be attached to instances in the same private network, so select the private network where your instance is located.

Description

The VPC cannot be changed after the elastic network card is created.

Switch: Elastic network cards can only be attached to instances in the same availability zone, so select the switch in the availability zone where your instance is located. Both can belong to different switches.

Description

The switch cannot be changed after the elastic network card is created.

(Optional) Primary intranet IP: Enter the primary intranet IPv4 address of the elastic network card. This IPv4 address must belong to a free address in the CIDR network segment of the switch. If you do not specify one, a free private IPv4 address will be automatically assigned to you when you create the elastic network adapter.

Security Group: Select a security group of the current private network.

(Optional) Description: Enter a description of the elastic network card to facilitate later management.

Click OK.

In the network card list, refresh the list. When the status of the new elastic network card is displayed as available, it means that you have successfully created the elastic network card.

Follow-up operations

After the elastic network card is successfully created, you can perform the following operations:

Attach the elastic network card to the instance

Modify elastic network card properties

Delete elastic network card

The above is the detailed content of How to attach an elastic network card when creating an instance. For more information, please follow other related articles on the PHP Chinese website!

Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
How Debian improves Hadoop data processing speedHow Debian improves Hadoop data processing speedApr 13, 2025 am 11:54 AM

This article discusses how to improve Hadoop data processing efficiency on Debian systems. Optimization strategies cover hardware upgrades, operating system parameter adjustments, Hadoop configuration modifications, and the use of efficient algorithms and tools. 1. Hardware resource strengthening ensures that all nodes have consistent hardware configurations, especially paying attention to CPU, memory and network equipment performance. Choosing high-performance hardware components is essential to improve overall processing speed. 2. Operating system tunes file descriptors and network connections: Modify the /etc/security/limits.conf file to increase the upper limit of file descriptors and network connections allowed to be opened at the same time by the system. JVM parameter adjustment: Adjust in hadoop-env.sh file

How to learn Debian syslogHow to learn Debian syslogApr 13, 2025 am 11:51 AM

This guide will guide you to learn how to use Syslog in Debian systems. Syslog is a key service in Linux systems for logging system and application log messages. It helps administrators monitor and analyze system activity to quickly identify and resolve problems. 1. Basic knowledge of Syslog The core functions of Syslog include: centrally collecting and managing log messages; supporting multiple log output formats and target locations (such as files or networks); providing real-time log viewing and filtering functions. 2. Install and configure Syslog (using Rsyslog) The Debian system uses Rsyslog by default. You can install it with the following command: sudoaptupdatesud

How to choose Hadoop version in DebianHow to choose Hadoop version in DebianApr 13, 2025 am 11:48 AM

When choosing a Hadoop version suitable for Debian system, the following key factors need to be considered: 1. Stability and long-term support: For users who pursue stability and security, it is recommended to choose a Debian stable version, such as Debian11 (Bullseye). This version has been fully tested and has a support cycle of up to five years, which can ensure the stable operation of the system. 2. Package update speed: If you need to use the latest Hadoop features and features, you can consider Debian's unstable version (Sid). However, it should be noted that unstable versions may have compatibility issues and stability risks. 3. Community support and resources: Debian has huge community support, which can provide rich documentation and

TigerVNC share file method on DebianTigerVNC share file method on DebianApr 13, 2025 am 11:45 AM

This article describes how to use TigerVNC to share files on Debian systems. You need to install the TigerVNC server first and then configure it. 1. Install the TigerVNC server and open the terminal. Update the software package list: sudoaptupdate to install TigerVNC server: sudoaptinstalltigervnc-standalone-servertigervnc-common 2. Configure TigerVNC server to set VNC server password: vncpasswd Start VNC server: vncserver:1-localhostno

Debian mail server firewall configuration tipsDebian mail server firewall configuration tipsApr 13, 2025 am 11:42 AM

Configuring a Debian mail server's firewall is an important step in ensuring server security. The following are several commonly used firewall configuration methods, including the use of iptables and firewalld. Use iptables to configure firewall to install iptables (if not already installed): sudoapt-getupdatesudoapt-getinstalliptablesView current iptables rules: sudoiptables-L configuration

Debian mail server SSL certificate installation methodDebian mail server SSL certificate installation methodApr 13, 2025 am 11:39 AM

The steps to install an SSL certificate on the Debian mail server are as follows: 1. Install the OpenSSL toolkit First, make sure that the OpenSSL toolkit is already installed on your system. If not installed, you can use the following command to install: sudoapt-getupdatesudoapt-getinstallopenssl2. Generate private key and certificate request Next, use OpenSSL to generate a 2048-bit RSA private key and a certificate request (CSR): openss

Debian mail server virtual host configuration methodDebian mail server virtual host configuration methodApr 13, 2025 am 11:36 AM

Configuring a virtual host for mail servers on a Debian system usually involves installing and configuring mail server software (such as Postfix, Exim, etc.) rather than Apache HTTPServer, because Apache is mainly used for web server functions. The following are the basic steps for configuring a mail server virtual host: Install Postfix Mail Server Update System Package: sudoaptupdatesudoaptupgrade Install Postfix: sudoapt

Debian Mail Server DNS Setup GuideDebian Mail Server DNS Setup GuideApr 13, 2025 am 11:33 AM

To configure the DNS settings for the Debian mail server, you can follow these steps: Open the network configuration file: Use a text editor (such as vi or nano) to open the network configuration file /etc/network/interfaces. sudonano/etc/network/interfaces Find network interface configuration: Find the network interface to be modified in the configuration file. Normally, the configuration of the Ethernet interface is located in the ifeth0 block.

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. Best Graphic Settings
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. How to Fix Audio if You Can't Hear Anyone
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
WWE 2K25: How To Unlock Everything In MyRise
4 weeks agoBy尊渡假赌尊渡假赌尊渡假赌

Hot Tools

DVWA

DVWA

Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software

VSCode Windows 64-bit Download

VSCode Windows 64-bit Download

A free and powerful IDE editor launched by Microsoft

MinGW - Minimalist GNU for Windows

MinGW - Minimalist GNU for Windows

This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.

ZendStudio 13.5.1 Mac

ZendStudio 13.5.1 Mac

Powerful PHP integrated development environment

WebStorm Mac version

WebStorm Mac version

Useful JavaScript development tools