Detailed explanation of all sql server error numbers - Guo Guo Chong

0 The operation completed successfully.
1 Functional error.
2 The system cannot find the specified file.
3 The system cannot find the specified path.
4 The system cannot open the file.
5 Access Denied.
6 The handle is invalid.
7 The storage control block is damaged.
8 There is insufficient storage space to process this command.
9 The storage control block address is invalid.
10 Environment error.
11 An attempt was made to load a malformed program.
12 The access code is invalid.
13 The data is invalid.
14 There is insufficient memory to complete this operation.
15 The system cannot find the specified drive.
16 Unable to delete directory.
17 The system cannot move the file to a different drive.
18 No more files.
19 The media is write protected.
20 The system cannot find the specified device.
21 The device is not ready.
22 The device does not recognize this command.
23 Data error (cyclic redundancy check).
24 The program issued a command, but the command length was incorrect.
25 The drive cannot find the location of a specific area or track on the disk.
26 The specified disk or floppy cannot be accessed.
27 The drive cannot find the requested sector.
28 The printer is out of paper.
29 The system cannot write to the specified device.
30 The system cannot read from the specified device.
31 The device connected to the system is not functioning.
32 The process cannot access the file because it is in use by another program.
33 The process cannot access the file because another program has locked part of the file.
36 There are too many open files for sharing.
38 End of file reached.
39 The disk is full.
50 Network requests are not supported.
51 The remote computer is unavailable.
52 There is a duplicate name on the network.
53 Network path not found.
54 The network is busy.
55 The specified network resource or device is no longer available.
56 The network BIOS command limit has been reached.
57 Network adapter hardware error.
58 The specified server cannot perform the requested operation.
59 An unexpected network error occurred.
60 The remote adapter is incompatible.
61 The printer queue is full.
62 Unable to obtain space on the server to save the file to be printed.
63 Delete files waiting to be printed.
64 The specified network name is no longer available.
65 Network access denied.
66 The network resource type is wrong.
67 The network name cannot be found.
68 The name limit of the local computer network card is exceeded.
69 Network BIOS session limit exceeded.
70 The remote server has been paused or is in the process of starting.
71 No more connections can be made to this remote computer because the computer's connection limit has been reached.
72 The specified printer or disk device has been suspended.
80 File exists.
82 Unable to create directory or file.
83 INT 24 failed.
84 Unable to obtain storage space to handle this request.
85 The local device name is already in use.
86 The specified network password is incorrect.
87 Parameter error.
88 A write error occurred on the network.
89 The system cannot start another process at this time.
100 Unable to create another system semaphore.
101 Another process owns an exclusive semaphore.
102 The semaphore has been set and cannot be turned off.
103 The semaphore can no longer be set.
104 Unable to request exclusive semaphore on interrupt.
105 The previous ownership of this semaphore has ended.
107 The program stopped because a replacement floppy disk was not inserted.
108 The disk is in use or locked by another process.
109 The pipeline has ended.
110 The system cannot open the specified device or file.
111 The file name is too long.
112 Insufficient disk space.
113 Can no longer get the ID of the internal file.
114 The target internal file has incorrect identification.
117 Application-made IOCTL call error.
118 Verify that the written switching parameter value is incorrect.
119 The system does not support the requested command.
120 This feature is only supported by this system.
121 The semaphore timeout has expired.
122 The data area passed to the system call is too small.
123 The file name, directory name, or volume label syntax is incorrect.
124 System call level error.
125 The disk has no volume label.
126 The specified module cannot be found.
127 The specified program cannot be found.
128 There are no waiting child processes.
130 An attempt was made to use the file handle of an open disk partition for operations other than raw disk I/O.
131 Attempt to move the file pointer before the beginning of the file.
132 Unable to set the file pointer on the specified device or file.
133 A JOIN or SUBST command cannot be used on a drive that contains a previously joined drive.
134 An attempt was made to use a JOIN or SUBST command on a drive that has been merged.
135 An attempt was made to use a JOIN or SUBST command on a drive that has been merged.
136 The system attempted to unjoin an unmerged drive.
137 The system attempted to de-SUBST an unsubstituted drive.
138 The system attempted to merge the drive into a directory on the merged drive.
139 The system attempted to substitute a drive with a directory on the substitute drive.
140 The system attempted to merge the drive to a directory on an alternative drive.
141 The system attempted to replace the drive with a directory on the merged drive.
142 The system cannot run JOIN or SUBST at this time.
143 The system cannot merge or replace drives to a directory on the same drive.
144 The directory is not a subdirectory of the root directory.
145 The directory is not empty.
146 The specified path is already in use in a substitution.
147 Insufficient resources to process this command.
148 The specified path cannot be used at this time.
149 An attempt was made to merge or replace a drive to a drive whose directory was the target of a previous replacement.
150 System trace information is not specified in the CONFIG.SYS file, or tracing is not allowed.
151 The number of semaphore events specified for DosMuxSemWait is incorrect.
152 DosMuxSemWait is not operable. Too many traffic lights have been set.
153 DosMuxSemWait manifest error.
154 The entered volume label exceeds the length limit of the target file system
155 Another thread cannot be created.
156 The receiving process has rejected this signal.
157 Segment has been abandoned and cannot be locked.
158 Segment has been unlocked.
159 The address of the thread identifier is wrong.
160 Wrong parameter string passed to DosExecPgm.
161 The specified path is invalid.
162 Signal has been suspended.
164 Unable to create more threads in the system.
167 Unable to lock file area.
170 The requested resource is in use.
173 It is not obvious for a request to provide a cancellation region for locking.
174 The file system does not support minimum unit changes of lock type.
180 The system detected the wrong segment number.
183 The file cannot be created when the file already exists.
186 Wrong flag passed.
187 The specified system semaphore name cannot be found.
196 The operating system cannot run this application.
197 The operating system is not currently configured to run this application.
199 The operating system cannot run this application.
200 The code segment cannot be larger than or equal to 64K.
203 The operating system cannot find the entered environment option.
205 Process in command subtree has no signal handler.
206 The file name or extension is too long.
207 The 2nd ring stack is occupied.
208 The file name wildcard character * or ? is not entered correctly, or too many file name wildcard characters are specified.
209 The signal being sent is wrong.
210 Unable to set signal handler.
212 Segment is locked and cannot be reallocated.
214 There are too many dynamic link modules connected to this program or dynamic link module.
215 Unable to nest calls to LoadModule.
230 Pipe status is invalid.
231 All pipeline instances are in use.
232 The pipe is being closed.
233 There is no process on the other end of the pipe.
234 More data available.
240 Cancel session.
254 The specified extended attribute name is invalid.
255 Extended attributes are inconsistent.
258 The waiting operation is expired.
259 No more data available.
266 The copy function cannot be used.
267 The directory name is invalid.
275 Extended attributes are not applicable in buffers.
276 The extended attributes file mounted on the file system is corrupted.
277 The extended attribute table file is full.
278 The specified extended attribute handle is invalid.
282 The mounted file system does not support extended attributes.
288 An attempt was made to release a multi-user terminal executable that is not owned by the caller.
298 Too many requests to the semaphore.
299 Only partial completion of a ReadProcessMemoty or WriteProcessMemory request.
300 Operation lock request denied.
301 The system received an invalid operation lock confirmation.
487 An attempt was made to access an invalid address.
534 Arithmetic result exceeds 32 digits.
535 There is a process at the other end of the pipe.
536 Waiting to open the process at the other end of the pipe.
994 Access denied to extended attributes.
995 The I/O operation was abandoned due to thread exit or application request.
996 Overlapped I/O event is not in signal state.
997 An overlapped I/O operation is in progress.
998 Invalid memory allocation access.
999 Error running in-page operation.
1001 Recursion too deep; stack overflow.
1002 The window cannot operate on a sent message.
1003 This function cannot be completed.
1004 Invalid flag.
1005 This volume does not contain a recognized file system. Please make sure that all requested file system drivers are loaded and that the volume is not corrupted.
1006 The volume on which the file resides has been externally altered, so the open file is no longer valid.
1007 The requested operation cannot be run in full screen mode.
1008 An attempt was made to reference a token that does not exist.
1009 The configuration registry database is damaged.
1010 The configuration registry key is invalid.
1011 Unable to open configuration registry key.
1012 Unable to read configuration registry key.
1013 Unable to write configuration registry key.
1014 A file in the registry database must be restored using logging or alternative replication. The restore completed successfully.
1015 The registry is damaged. One of the file structures containing registry data is damaged, or the system's file memory image is damaged, or the file cannot be recovered because replacement copies or logs are missing or damaged.
1016 Recovery of an I/O operation initiated by the registry failed. The registry cannot read, write, or clear any of the files containing the registry system image.
1017 The system attempted to load or restore a file to the registry, but the specified file was not in the registry file format.
1018 An attempt was made to run an illegal operation on a registry key marked for deletion.
1019 The system cannot configure the requested space in the registry log.
1020 Cannot create a symbolic link in a registry key that already has a subkey or value.
1021 Unable to create stable child under volatile parent.
1022 Notification change request is completing and information was not returned to the caller's buffer. The current caller must enumerate the file to find changes.
1051 Stop control has been sent to a service that is dependent on other running services.
1052 The requested control is not valid for this service
1053 The service did not respond to the start or control request in a timely manner.
1054 Unable to create a thread for this service.
1055 Lock the service database.
1056 An instance of the service is already running.
1057 The account name is invalid or does not exist, or the password is invalid for the specified account name.
1058 The service cannot be started, either because it is disabled or the device associated with it is not started.
1059 A circular service dependency is specified.
1060 The specified service does not exist as an installed service.
1061 The service cannot accept control information at this time.
1062 The service is not started.
1063 The service process cannot connect to the service controller.
1064 An exception occurred in the service while processing the control request.
1065 The specified database does not exist.
1066 The service has returned a specific service error code.
1067 The process terminated unexpectedly.
1068 The dependent service or group cannot be started.
1069 The service cannot be started due to failed login.
1070 After starting, the service stays in startup paused state.
1071 The specified service database lock is invalid.
1072 The specified service has been marked for deletion.
1073 The specified service already exists.
1074 The system is currently running with the latest valid configuration.
1075 The dependent service does not exist or has been marked for deletion.
1076 Accepted using current boot as the last valid control setting.
1077 No attempt has been made to boot the service since the last startup.
1078 Name is already used as a service name or service display name.
1079 The account for this service is different from the account for other services running on the same process.
1080 The fail action can only be set for Win32 services, not for drivers.
1081 This service runs the same process as the Service Control Manager. Therefore, if the service handler terminates unexpectedly, the service control manager cannot take any action.
1082 This service has not yet set up a recovery procedure.
1083 The service configured to run in this executable program cannot execute the service.
1100 The actual end of the tape has been reached.
1101 Tape access reached file mark.
1102 The beginning of the tape or disk partition has been reached.
1103 Tape access has reached the end of a set of files.
1104 There is no more data on the tape.
1105 The tape cannot be partitioned.
1106 When accessing a new tape for a multi-volume partition, the current block size is incorrect.
1107 When loading tape, partition information not found.
1108 Unable to lock media eject function.
1109 Unable to dismount media.
1110 The media in the drive may have been changed.
1111 Reset the I/O bus.
1112 There is no media in the drive.
1113 There is no character to which this Unicode character can be mapped in the multibyte target code page.
1114 Dynamic link library (DLL) initialization routine failed.
1115 System shutdown in progress.
1116 The system shutdown cannot be interrupted because there is no shutdown process in progress.
1117 This request cannot be run because of an I/O device error.
1118 No serial device was initialized successfully. The serial driver will be uninstalled.
1119 Unable to open a device that is sharing an interrupt request (IRQ) with another device. At least one other device using this IRQ is open.
1120 The sequence I/O operation was completed by a write to another serial port. (IOCTL_SERIAL_XOFF_COUNTER has reached zero.)
1121 The serial I/O operation completed because the timeout period has expired. (IOCTL_SERIAL_XOFF_COUNTER has not reached zero.)
1122 ID address tag not found on floppy disk.
1123 The floppy disk sector ID character field does not match the floppy disk controller track address.
1124 The floppy disk controller reported an error that the floppy disk driver cannot recognize.
1125 The floppy disk controller returned inconsistent results in its registers.
1126 When accessing the hard disk, the recalibration operation failed and retries still failed.
1127 When accessing the hard disk, the disk operation failed and retries still failed.
1128 When accessing the hard disk, the disk controller must still be reset even if it fails.
1129 End of tape reached.
1130 The server has insufficient storage space to process this command.
1131 Potential deadlock condition detected.
1132 The specified base address or file offset is not properly aligned.
1140 An attempt to change the system power state was vetoed by another application or driver.
1141 The system BIOS failed in its attempt to change the system power state.
1142 An attempt was made to create more links on a file than the system allows.
1150 The specified program requires a newer version of Windows.
1151 The specified program is not a Windows or MS-DOS program.
1152 Only one instance of the specified program can be started.
1153 This specified program is for older Windows versions.
1154 One of the library files required to execute this application is corrupted.
1155 No application is associated with the file specified by this operation.
1156 An error occurred while sending the command to the application.
1157 One of the library files required to execute this application cannot be found.
1158 The current program has used all system-allowed handles to the Window Manager object.
1159 Messages can only be used with synchronous operations.
1160 The indicated source element has no media.
1161 The indicated target element already contains media.
1162 The indicated element does not exist.
1163 The indicated element is part of a storage resource that is not shown.
1164 The display device needs to be reinitialized because of a hardware error.
1165 The device shows that it needs to be cleared before attempting further operations.
1166 The device shows that its door is still open.
1167 The device is not connected.
1168 Element not found.
1169 There is no entry matching the specified entry in the index.
1170 The specified property set does not exist on the object.
1171 The point passed to GetMouseMovePoints is not in the buffer.
1172 The tracking (workstation) service is not running.
1173 Volume ID not found.
1175 Unable to delete file to be replaced.
1176 Unable to move replacement file to file to be replaced. Files to be replaced retain their original names.
1177 Unable to move replacement file to file to be replaced. The file to be replaced has been renamed to the backup name.
1178 Volume change record deleted.
1179 The Volume Change Logging service is not active.
1180 A file was found, but it may not be the correct file.
1181 The log entry was deleted from the log.
1200 The specified device name is invalid.
1201 The device is not currently connected, but it is a logged connection.
1202 An attempt was made to log a device that has been previously logged.
1203 No network provider accepts the specified network path.
1204 The specified network provider name is invalid.
1205 Unable to open network connection profile.
1206 The network connection configuration file is damaged.
1207 Unable to enumerate empty vector.
1208 An extension error occurred.
1209 The specified group name format is invalid.
1210 The specified computer name has an invalid format.
1211 The specified event name format is invalid.
1212 The specified domain name format is invalid.
1213 The specified service name format is invalid.
1214 The specified network name format is invalid.
1215 The specified share name format is invalid.
1216 The specified password format is invalid.
1217 The specified message name format is invalid.
1218 The specified message target format is invalid.
1219 The supplied credentials conflict with an existing credential set.
1220 An attempt was made to create a session to the network server, but too many sessions have been created for the server.
1221 The workgroup or domain name is already in use by another computer on the network.
1222 The network is not connected or started.
1223 The operation has been canceled by the user.
1224 The requested operation cannot be performed on a file opened using a user-mapped area.
1225 The remote system refused the network connection.
1226 The network connection has been closed appropriately.
1227 The network transport endpoint already has an address associated with it.
1228 The address is still not associated with the network endpoint.
1229 An attempt was made to perform an operation on a non-existent network connection.
1230 An invalid operation was attempted on an active network connection.
1231 The network location cannot be accessed. For information about network troubleshooting, see Windows Help.
1232 The network location cannot be accessed. For information about network troubleshooting, see Windows Help.
1233 The network location cannot be accessed. For information about network troubleshooting, see Windows Help.
1234 No service is operating on the target network endpoint on the remote system.
1235 The request was terminated.
1236 The network connection was terminated by the local system.
1237 The operation cannot be completed. Should try again.
1238 Unable to connect to the server because the maximum number of simultaneous connections for this account has been reached.
1239 An attempt was made to log in during a time when this account was not authorized.
1240 This account is not authorized to log in from this workstation.
1241 The requested operation cannot use this network address.
1242 The server has been registered.
1243 The specified service does not exist.
1244 The requested operation cannot be performed because the user has not been authenticated.
1245 The requested operation cannot be performed because the user has not logged in to the network. The specified service does not exist.
1246 Continuing work.
1247 An initial operation was attempted, but initialization was completed.
1248 No more local devices.
1249 The specified site does not exist.
1250 A domain controller with the specified name already exists.
1251 This operation is only supported when connected to the server.
1252 The Group Policy framework should call the extension even if no changes have been made.
1253 The specified user does not have a valid profile.
1254 Microsoft Small Business Server does not support this operation.
1300 Not all privileges referenced are assigned to the caller.
1301 Some mappings between account names and security identities are incomplete.
1302 There is no system quota limit specifically set for this account.
1303 No encryption key available. A known encryption key was returned.
1304 The password is too complex and cannot be converted to a LAN Manager password. The LAN Manager password returned is an empty string.
1305 Revision level unknown.
1306 indicates that the two revision levels are incompatible.
1307 This security identity cannot be assigned as the owner of this object.
1308 This security identity cannot be assigned as the primary group of an object.
1309 A thread that is not currently impersonating a client attempted to manipulate an impersonation token.
1310 The group may not be disabled.
1311 There is currently no login server available to service the login request.
1312 The specified login session does not exist. May have been terminated.
1313 The specified privilege does not exist.
1314 The client does not have the required privileges.
1315 The name provided is not the correct form of account name.
1316 The specified user already exists.
1317 The specified user does not exist.
1318 The specified group already exists.
1319 The specified group does not exist.
1320 The specified user account is already a member of the specified group, or the specified group cannot be deleted because the group contains members.
1321 The specified user account is not a member of the specified group account.
1322 The last remaining system administration account cannot be disabled or deleted.
1323 Unable to update password. The value provided as the current password is incorrect.
1324 Unable to update password. The value supplied to the new password contains a value that is not allowed in passwords.
1325 Unable to update password. The value provided for the new password does not meet the length, complexity, or history requirements for the character domain.
1326 Login failed: Unknown username or wrong password.
1327 Login failed: User account restriction.
1328 Login failed: Account login time limit violated.
1329 Login failed: The user is not allowed to log on to this computer.
1330 Login failed: The password for the specified account has expired.
1331 Login failed: Disable current account.
1332 No mapping between account name and security ID is completed.
1333 Too many local user identifiers (LUIDs) requested at one time.
1334 No more local user identifiers (LUIDs) available.
1335 The secondary authorization portion of the security ID is invalid for this particular usage.
1336 The access control list (ACL) structure is invalid.
1337 The security ID structure is invalid.
1338 The security descriptor structure is invalid.
1340 Unable to create inherent access control list (ACL) or access control entry (ACE).
1341 The server is currently disabled.
1342 The server is currently enabled.
1343 The value provided to the identification number authority is an invalid value.
1344 No more memory available to update security information.
1345 The specified attribute is invalid or incompatible with the attributes of the entire group.
1346 The specified impersonation level is invalid, or the supplied impersonation level is invalid.
1347 Unable to open anonymous level security token.
1348 The requested authentication information category is invalid.
1349 The token's type is inappropriate for the method it is trying to use.
1350 Cannot run a security operation on an object that is not associated with security.
1351 Unable to read configuration information from the domain controller, either because the machine is unavailable or access is denied.
1352 The Security Account Manager (SAM) or Local Security Authority (LSA) server is in an error state running security operations.
1353 The domain is in an error state for running security operations.
1354 This operation is only possible for the primary domain controller of the domain.
1355 The specified domain does not exist or cannot be contacted.
1356 The specified domain already exists.
1357 An attempt was made to exceed the limit on the number of domains per server.
1358 The requested operation cannot be completed due to a severe media failure or data structure corruption on the disk.
1359 An internal error occurred.
1360 Generic access types are contained in access masks that have been mapped to non-generic types.
1361 Security descriptor format is incorrect (absolute or autorelative).
1362 The request operation is restricted to the login process only. The calling process is not registered as a login process.
1363 Unable to start a new session using an identity that is already in use.
1364 Unknown specified authentication packet.
1365 The login session is not in a state consistent with the requested operation.
1366 The login session ID is already in use.
1367 The login request contained an invalid login type value.
1368 Unable to simulate via a named pipe before reading data using the pipe.
1369 The transaction status of the registry subtree is inconsistent with the request status.
1370 There is internal corruption in the security database.
1371 This operation cannot be run on the built-in account.
1372 This operation cannot be run on the built-in special group.
1373 This operation cannot be run on the built-in special user.
1374 The user cannot be removed from the group because the current group is the user's primary group.
1375 The token is already used as the primary token.
1376 The specified local group does not exist.
1377 The specified account name is not a member of the local group.
1378 The specified account name is already a member of the local group.
1379 The specified local group already exists.
1380 Login failed: The user was not granted the requested login type on this computer.
1381 The maximum number of secrets that can be saved in a single system has been exceeded.
1382 The length of the secret exceeds the maximum allowed length.
1383 The local security authority database contains an internal inconsistency.
1384 The user's security context accumulated too many security tokens during a login attempt.
1385 Login failed: The user was not granted the requested login type on this computer.
1386 Cross-encrypted password is required when changing user password.
1387 The member cannot be added to or removed from the local group because the member does not exist.
1388 The new member cannot be added to the local group because the member has the wrong account type.
1389 Too many security IDs have been specified.
1390 A cross-encrypted password is required when changing this user's password.
1391 Indicates that the ACL does not contain any inheritable components.
1392 The file or directory is corrupted and cannot be read.
1393 The disk structure is corrupted and cannot be read.
1394 There is no user session entry for the specified login session.
1395 The service being accessed has a target authorization limit on the number of connections. At this time, it is no longer possible to connect because the upper limit of the number of acceptable connections has been reached.
1396 Login failed: The target account name is incorrect.
1397 Mutual authentication failed. The server's domain controller password has expired.
1398 There is a time difference between the client and the server.
1400 Invalid window handle.
1401 Invalid menu handle.
1402 Invalid cursor handle.
1403 Invalid accelerator table handle.
1404 Invalid hook handle.
1405 Invalid multi-window position structure handle.
1406 The top-level subwindow cannot be created.
1407 Window category not found.
1408 Invalid window; it belongs to another thread.
1409 Hotkey already registered.
1410 Category already exists.
1411 Category does not exist.
1412 The category still has open windows.
1413 Invalid index.
1414 Invalid icon handle.
1415 Use dedicated DIALOG window words.
1416 List box id not found.
1417 Wildcard character not found.
1418 The thread does not have an open clipboard.
1419 No hotkey registered.
1420 The window is not a legal dialog window.
1421 Control ID not found.
1422 The combo box message is invalid because there is no editing control.
1423 The window is not a combo box.
1424 Height must be less than 256.
1425 Invalid device context (DC) handle.
1426 Invalid hooker type.
1427 Invalid hook procedure.
1428 Cannot set non-native hook without module handle.
1429 This hook can only be set globally.
1430 Journal Hook program has been installed.
1431 The hook has not been installed.
1432 Invalid message for single selection listbox.
1433 LB_SETCOUNT is sent to a non-passive list box.
1434 This list box does not support tab width.
1435 Cannot destroy an object created by another thread.
1436 The child window has no menu.
1437 The window has no system menu.
1438 Invalid message dialog style.
1439 Invalid system-wide (SPI_*) parameters.
1440 Screen locked.
1441 All handles to windows in a multiple window position structure must have the same parent.
1442 The window is not a child window.
1443 Invalid GW_* command.
1444 Invalid thread ID.
1445 Unable to handle messages in non-Multiple Document Interface (MDI) windows.
1446 The pop-up menu has been activated.
1447 The window has no scroll bars.
1448 The scroll bar range cannot be larger than MAXLONG.
1449 The window cannot be displayed or deleted in the specified manner.
1450 There are insufficient system resources to complete the requested service.
1451 There are insufficient system resources to complete the requested service.
1452 There are insufficient system resources to complete the requested service.
1453 Insufficient quota to complete the requested service.
1454 Insufficient quota to complete the requested service.
1455 The page file is too small to complete the operation.
1456 Menu item not found.
1457 The keyboard layout handle is invalid.
1458 Hook type not allowed.
1459 This operation requires an interactive window workstation.
1460 The operation returned because the timeout period has expired.
1461 Invalid monitor handle.
1500 The event log file is damaged.
1501 The event log file cannot be opened and the event log service is not started.
1502 The event log file is full.
1503 The event log file has changed between reads.
1601 The Windows Installation service cannot be accessed. Please contact technical support to confirm whether the Windows Installation service is registered correctly.
1602 The user canceled the installation.
1603 A serious error occurred during installation
1604 The installation has hung and is not completed.
1605 This operation is only valid for the currently installed product.
1606 Function ID is not registered.
1607 Component ID is not registered.
1608 Unknown attribute.
1609 The handle is in an incorrect state.
1610 The configuration data for this product is corrupted. Please contact technical support.
1611 The component qualifier does not exist.
1612 The installation source for this product is unavailable. Please verify that the source exists and is accessible.
1613 The Windows Installer service cannot install this installation package. You must install the Windows Service Park, which contains a new version of Windows Installer Services.
1614 The product was not uninstalled.
1615 SQL query syntax is incorrect or not supported.
1616 The record character field does not exist.
1617 The device has been removed.
1618 Another installation operation is in progress. Please complete that operation before continuing with this installation operation.
1619 Unable to open this installation package. Please verify that the package exists and is accessible, or contact the application vendor to verify that this is a valid Windows Installer package.
1620 Unable to open this installation package. Please contact the application vendor to verify that this is a valid Windows Installer package.
1621 There was an error starting the Windows Installation Service user interface. Please contact technical support.
1622 Error opening installation log file. Please verify that the specified log file location exists and can be written to.
1623 The language of the installation package is not supported by the system.
1624 Error when applying transform. Please verify that the specified transform path is valid.
1625 System policy prohibits this installation. Please contact your system administrator.
1626 Unable to execute function.
1627 A problem occurred with the function during execution.
1628 An invalid or unknown table was specified.
1629 The data type provided is incorrect.
1630 This type of data is not supported.
1631 The Windows Installation service failed to start. Please contact technical support.
1632 The temporary folder is full or unusable. Please verify that the temporary folder exists and is writable.
1633 The installer package is not supported for this processor type. Please contact the product supplier.
1634 The component is not in use on this computer.
1635 Unable to open patch package. Please verify that the patch package exists and is accessible, or contact the application vendor to verify that this is a Windows Installer patch package.
1636 Unable to open patch package. Please contact the application vendor to verify whether this is a patch package for Windows Installer.
1637 The Windows Installer service cannot process this plug-in package. You must install a Windows Service Pack that contains a new version of Windows Installation Services.
1638 Another version of this product is already installed. The installation of this version cannot continue. To configure or remove an existing version of this product, use Add/Remove Programs in Control Panel.
1639 Invalid command line argument. For detailed command-line help, check out the Windows Installer SDK.
1640 During a Terminal Services remote session, only administrators have permission to add, remove, or configure server software. If you want to install or configure software on the server, please contact your network administrator.
1641 The requested operation ended successfully. For the changes to take effect, the system must be restarted.
1642 The Windows Installation service cannot install the upgrade patch because the program being upgraded may be missing or the upgrade patch may update a different version of the program. Please make sure that the program to be upgraded is on your computer and that your upgrade patch is correct.
1700 Invalid string binding.
1701 The binding handle type is incorrect.
1702 The binding handle is invalid.
1703 RPC protocol sequence is not supported.
1704 Invalid RPC protocol sequence.
1705 The string universally unique identifier (UUID) is invalid.
1706 The endpoint format is invalid.
1707 The network address is invalid.
1708 Endpoint not found.
1709 The timeout value is invalid.
1710 The object universally unique identifier (UUID) cannot be found.
1711 The object universally unique identifier (UUID) has been registered.
1712 Type universally unique identifier (UUID) has been registered.
1713 The RPC server is already listening.
1714 No protocol sequence is registered.
1715 RPC server is not listening.
1716 Unknown manager type.
1717 Unknown interface.
1718 No links.
1719 No protocol sequence.
1720 Unable to create endpoint.
1721 There are insufficient resources to complete this operation.
1722 RPC server is unavailable.
1723 The RPC server is too busy to complete this operation.
1724 Invalid network option.
1725 There are no remote procedure calls in use in this thread.
1726 Remote procedure call failed.
1727 The remote procedure call failed and is not running.
1728 Remote Procedure Call (RPC) protocol error.
1730 The RPC server does not support delivery syntax.
1732 Universal Unique Identifier (UUID) type is not supported.
1733 Invalid tag.
1734 Invalid array bounds.
1735 Link does not contain project name.
1736 Invalid name syntax.
1737 Name syntax is not supported.
1739 There is no network address available to create a universally unique identifier (UUID).
1740 The endpoint is a backup.
1741 Unknown authentication type.
1742 The maximum number of calls is too small.
1743 The string is too long.
1744 RPC protocol sequence not found.
1745 The process number is out of range.
1746 The binding does not contain any authentication information.
1747 Unknown authentication service.
1748 Unknown authentication level.
1749 The security context is invalid.
1750 Unknown authorization service.
1751 Invalid project.
1752 The server endpoint cannot run the operation.
1753 No more endpoints are available in the endpoint map.
1754 No interfaces were exported.
1755 Project name is incomplete.
1756 The version option is invalid.
1757 There are no other members.
1758 No content is not exported.
1759 Interface not found.
1760 Project already exists.
1761 Project not found.
1762 No name service available.
1763 The network address family is invalid.
1764 The requested operation is not supported.
1765 No security context available to allow impersonation.
1766 An internal error occurred in a remote procedure call (RPC).
1767 The RPC server attempted to divide an integer by zero.
1768 An address error occurred in the RPC server.
1769 Floating point operations on the RPC server lead to division by zero.
1770 Floating point underflow occurred on the RPC server.
1771 A floating point overflow occurred on the RPC server.
1772 The list of available RPC servers for automatic handle binding has been exhausted.
1773 Unable to open character translation table file.
1774 The file containing the character translation table is less than 512 bytes.
1775 Passing an empty context handle from client to host on remote procedure call.
1777 The context handle changed during a remote procedure call.
1778 The binding handle passed to the remote procedure call does not match.
1779 The socket cannot obtain the remote procedure call handle.
1780 Pass a null reference pointer to the socket.
1781 The enumeration value is out of range.
1782 The byte count is too small.
1783 The receiver received bad data.
1784 The user buffer provided to the requested operation is invalid.
1785 The disk media is not recognized. May not be formatted.
1786 The workstation does not have a trusted secret.
1787 The security database on the server does not have a computer account for this workstation trust relationship.
1788 The trust relationship between the primary domain and the trusted domain failed.
1789 The trust relationship between this workstation and the primary domain failed.
1790 Network login failed.
1791 A remote procedure call is already in progress for this thread.
1792 An attempt was made to log in, but the network login service was not started.
1793 User account expired.
1794 The forwarder is occupied and cannot be uninstalled.
1795 The specified printer driver is already installed.
1796 The specified port is unknown.
1797 Unknown printer driver.
1798 Unknown printer processor.
1799 The specified separator page file is invalid.
1800 The specified priority is invalid.
1801 The printer name is invalid.
1802 The printer already exists.
1803 The printer command is invalid.
1804 The specified data type is invalid.
1805 The specified environment is invalid.
1806 No more bindings.
1807 The account used is an inter-domain trust account. Please use your global user account or local user account to access this server.
1808 The account used is a computer account. Use your global user account or local user account to access this server.
1809 The account used is a server trust account. Use your global user account or local user account to access this server.
1810 The name or security identification (SID) of the specified domain is inconsistent with the trust information of the domain.
1811 The server is in use and cannot be uninstalled.
1812 The specified image file does not contain a resource area.
1813 The resource type specified in the image file cannot be found.
1814 The resource name specified in the image file cannot be found.
1815 The resource language identifier specified in the image file cannot be found.
1816 Insufficient quota to process this command.
1817 No interface has been registered.
1818 The remote procedure call was canceled.
1819 Binding handle does not contain all required information.
1820 Communication failed during remote procedure call.
1821 The requested authentication level is not supported.
1822 No primary name registered.
1823 The specified error is not a valid Windows RPC error code.
1824 A UUID has been configured that is valid only on this computer.
1825 A security package-specific error occurred.
1826 The thread was not canceled.
1827 Invalid encode/decode handle operation.
1828 The version of the serialization wrapper is incompatible.
1829 The version of the RPC acceptor is incompatible.
1830 The RPC pipe object is invalid or corrupt.
1831 An invalid operation was attempted on an RPC pipe object.
1832 Unsupported RPC pipe version.
1898 The group member cannot be found.
1899 Unable to create endpoint mapping table database entry.
1900 The object universally unique identifier (UUID) is a nil UUID.
1901 The specified time is invalid.
1902 The specified format name is invalid.
1903 The specified format size is invalid.
1904 The specified printer handle is waiting for
1905 The specified printer has been deleted.
1906 The printer status is invalid.
1907 The user password must be changed before logging in for the first time.
1908 The domain controller for this domain cannot be found.
1909 The referenced account is currently locked and may not be able to log in.
1910 The specified exporter of this object was not found
1911 The specified object was not found.
1912 The specified object parser was not found.
1913 Some data to be sent still stays in the request buffer.
1914 Invalid asynchronous remote procedure call handle.
1915 The asynchronous RPC call handle for this operation is incorrect.
1916 The RPC pipe object has been closed.
1917 All pipes were processed before the RPC call was completed.
1918 No other data is available from the RPC pipe.
1919 There is no site name available for this machine.
1920 The system cannot access this file.
1921 The system cannot recognize the file name.
1922 The item is not of the requested type.
1923 Unable to export UUIDs for all objects to the specified item.
1924 Unable to export interface to specified item.
1925 The specified profile item cannot be added.
1926 The specified profile element cannot be added.
1927 The specified configuration file element cannot be deleted.
1928 Unable to add group element.
1929 Unable to delete group element.
2000 Invalid pixel format.
2001 The specified driver is invalid.
2002 Window style or category attributes are not valid for this operation.
2003 The requested primitive operation is not supported.
2004 The requested transform operation is not supported.
2005 The requested cut operation is not supported.
2010 The specified color management module is invalid.
2011 The specified color file configuration is invalid.
2012 The specified identifier cannot be found.
2013 The required ID was not found.
2014 The specified ID already exists.
2015 The specified color file configuration is not relevant to any device.
2016 The specified color file configuration cannot be found
2017 The specified color space is invalid.
2018 Image color management is not enabled.
2019 There was a bug in removing this color transfer.
2020 The specified color transfer is invalid.
2021 The specified transform does not match the bitmap's color space.
2022 The specified named color index does not exist in the configuration file.
2102 The workstation driver is not installed.
2103 Unable to locate the server.
2104 An internal error occurred and the network cannot access the shared memory segment.
2105 Insufficient network resources.
2106 The workstation does not support this operation.
2107 The device is not connected.
2108 The network connection was successful, but the user needs to be prompted for a different password than originally specified.
2114 The server service is not started.
2115 The queue is empty.
2116 The device or directory does not exist.
2117 This operation cannot be performed on a redirected resource.
2118 Name has been shared.
2119 The server is currently unable to provide the required resource.
2121 Additional requested items exceed the allowed limit.
2122 The peer-to-peer service only supports two simultaneous users.
2123 API return buffer is too small.
2127 Remote API error.
2131 An error occurred while opening or reading the configuration file.
2136 A general network error occurred.
2137 The status of the workstation service is inconsistent. Before restarting the workstation service, restart the computer.
2138 The workstation service did not start.
2139 The required information is not available.
2140 A Windows 2000 internal error occurred.
2141 The server has no transaction settings.
2142 The remote server does not support the requested API.
2143 The event name is invalid.
2144 This computer name already exists on the network. Please change the name and restart.
2146 The specified component cannot be found in the configuration information.
2147 The specified parameter cannot be found in the configuration information.
2149 One of the command lines in the configuration file is too long.
2150 The printer does not exist.
2151 The print job does not exist.
2152 Printer target not found.
2153 The printer target already exists.
2154 The printer queue already exists.
2155 Unable to add other printers.
2156 Unable to add another print job.
2157 Unable to add additional printer targets.
2158 This printer target is idle and not accepting control operations.
2159 This Printer Target Request contains an invalid control function.
2160 The print handler is not responding.
2161 The spooler is not running.
2162 Print the current status of the target, this operation cannot be performed.
2163 This operation cannot be performed due to the current status of the printer queue.
2164 This operation cannot be performed due to the current status of the print job.
2165 Unable to allocate memory for spooler.
2166 The device driver does not exist.
2167 The print handler does not support this data type.
2168 The print handler is not installed.
2180 Lock the service database.
2181 The service table is full.
2182 The requested service has already been started.
2183 This service did not respond to control operations.
2184 The service is still not started.
2185 The service name is invalid.
2186 The service has no response control function.
2187 Service control is busy.
2188 The configuration file contains an invalid service program name.
2189 The service cannot be controlled under the current conditions.
2190 The service terminated abnormally.
2191 This service cannot accept the requested "pause" or "stop" operation.
2192 Service control "Scheduler" cannot find the service name in "Schedule".
2193 Unable to read the service control scheduler pipe.
2194 Unable to create thread for new service.
2200 This workstation is already logged into the LAN.
2201 The workstation is not logged into the LAN.
2202 The specified username is invalid.
2203 The password parameter is invalid.
2204 Login processor did not add message alias.
2205 Login processor did not add message alias.
2206 Logout handler did not delete message alias.
2207 Logout handler did not delete message alias.
2209 Suspend network login.
2210 There is a conflict with the central login server.
2211 The server does not set the correct user path.
2212 An error occurred while loading or running the login script.
2214 The login server is not specified, and the computer's login status is stand-alone operation.
2215 The login server cannot be found.
2216 This computer already has a login domain.
2217 The login server cannot verify the login.
2219 Security database not found.
2220 The group name cannot be found.
2221 Username not found.
2222 The resource name cannot be found.
2223 Group already exists.
2224 Account already exists.
2225 The resource usage permission list already exists.
2226 This operation can only be performed on the primary domain controller for this domain.
2227 The security database is not started.
2228 Too many names in the user account database.
2229 Disk I/O failed.
2230 The limit of 64 projects per resource has been exceeded.
2231 Users with sessions must not be deleted.
2232 The upper directory cannot be found.
2233 Unable to add to secure database session cache segment.
2234 This operation cannot be performed on this special group.
2235 The user account database session cache does not have a record for this user.
2236 User already belongs to this group.
2237 User does not belong to this group.
2238 This user account has not been defined yet.
2239 This user account has expired.
2240 This user is not allowed to log on to the network from this workstation.
2241 Users are not allowed to log in to the network at this time.
2242 This user's password has expired.
2243 This user's password cannot be changed.
2244 This password cannot be used at this time.
2245 The password does not meet the requirements of the password policy. Check the requirements for minimum password length, password complexity, and password history.
2246 This user's password was recently enabled and cannot be changed now.
2247 The security database is corrupted.
2248 The network/local security database replicated by this replica does not need to be updated.
2249 The database replicated by this replica is out of date; please synchronize the data in it.
2250 This network connection does not exist.
2251 This asg_type is invalid.
2252 This device is currently being shared.
2270 The computer name cannot be added as a message alias. This name may already exist on the web.
2271 The messenger service has been started.
2272 The messenger service failed to start.
2273 This message alias cannot be found on the network.
2274 This message alias has been forwarded.
2275 This message alias has been added, but is still being forwarded.
2276 This message alias already exists locally.
2277 The number of added message aliases has exceeded the upper limit.
2278 Unable to delete computer name.
2279 Message cannot be forwarded back to the same workstation.
2280 Domain message processor error.
2281 The message has been sent, but the recipient has suspended the messenger service.
2282 The message has been sent but not received yet.
2283 The message alias is currently in use. Please wait a moment and try again.
2284 The messenger service has not been started.
2285 The name is not on the local computer.
2286 The forwarded message alias cannot be found on the network.
2287 The remote communication station's message alias table is full.
2288 Messages for this alias are not currently being forwarded.
2289 The broadcast message was truncated.
2294 The device name is invalid.
2295 Writing error.
2297 Duplicate message alias on the network.
2298 This message alias will be deleted later.
2299 Message aliases are not removed from all networks.
2300 This operation cannot be performed on computers using multiple networks.
2310 This shared resource does not exist.
2311 The device is not shared.
2312 A session with this computer name does not exist.
2314 There is no file open with this identification number.
2315 Failed to execute remote management command.
2316 Failed to open remote temporary file.
2317 Data returned from remote management commands has been truncated to 64K.
2318 This device cannot be shared as a background processing resource and a non-background processing resource at the same time.
2319 The information in the server inventory may be incorrect
2320 The computer is not active in this domain
2321 Before the share can be deleted, the share needs to be removed from the distributed file system.
2331 This operation cannot be performed on this device
2332 This device cannot be shared.
2333 This device is not open.
2334 This list of device names is invalid.
2335 Queue priority is invalid.
2337 There are no shared communication devices.
2338 The specified queue does not exist.
2340 This device list is invalid.
2341 The requested device is invalid.
2342 This device is in use by a spooler.
2343 This device is already being used as a communications device.
2351 This computer name is invalid.
2354 The specified string and prefix are too long.
2356 This path component is invalid.
2357 Unable to determine input type.
2362 The type buffer is not large enough.
2370 Configuration file must not exceed 64K.
2371 The initial offset is out of bounds.
2372 The system cannot delete the current connection to the network resource.
2373 The system cannot parse the command line in this file.
2374 An error occurred while loading the configuration file. \
2375 An error occurred while saving the configuration file. The configuration file was only partially saved.
2378 This log file has changed between reads.
2380 The resource path cannot be a directory.
2381 The resource path is invalid.
2382 The target path is invalid.
2383 The source path and destination path belong to different servers.
2385 The requested Run server is now paused.
2389 An error occurred while communicating with the Run server.
2391 Error starting background processing.
2392 The shared resource you are connected to cannot be found.
2400 Invalid LAN adapter number.
2401 This network connection has a file open or a request pending.
2402 The connection in use still exists.
2403 The share name or password is invalid.
2404 The device is in use by an active process and cannot be disconnected.
2405 This drive letter is already in use locally.
2430 The specified client has already registered for the specified event.
2431 Alert table is full.
2432 The alert name issued is invalid or does not exist.
2433 Invalid alert recipient.
2434 The user's login time is no longer valid. So the user's session with that server has been deleted.
2440 The requested record number is not in the log file.
2450 The user account database is not configured correctly.
2451 This operation is not allowed while the Netlogon service is running.
2452 This operation cannot be performed on the last administrative account.
2453 The domain controller for this domain cannot be found.
2454 Unable to set login information for this user.
2455 Netlogon service has not been started.
2456 Unable to add to user account database.
2457 This server's clock does not match the primary domain controller's clock.
2458 Password mismatch detected.
2460 The server identifier does not specify a valid server.
2461 The session ID does not specify a valid session.
2462 The connection identifier does not specify a valid connection.
2463 No more entries can be added to the available servers table.
2464 The server has reached the maximum number of supported sessions.
2465 The server has reached the maximum number of supported connections.
2466 The number of files opened by the server has reached the upper limit and no more files can be opened.
2467 This server does not have a replacement server registered.
2470 Please use low-level API (Remote Management Protocol).
2480 The UPS service cannot access the UPS driver.
2481 UPS service setting error.
2482 The UPS service cannot access the specified communication port (Comm Port).
2483 The UPS shows a line interruption or low battery, and the service is not started.
2484 The UPS service cannot perform the system shutdown operation.
2500 The following program returns an MS-DOS error code:
2501 The following program requires more memory:
2502 The following program calls an unsupported MS-DOS function:
2503 The workstation cannot start up.
2504 The following file is corrupted.
2505 No bootloader is specified in the startup block definition file.
2506 NetBIOS returned error: NCB and SMB data dump.
2507 Disk I/O error.
2508 Unable to replace image parameters.
2509 Too many image parameters spanning disk sector range.
2510 Image not produced from an MS-DOS floppy formatted with /S.
2511 Will restart remotely later.
2512 Unable to call remote start server.
2513 Unable to connect to remote boot server.
2514 Unable to open the image file on the remote boot server.
2515 Connecting to the remote startup server...
2516 Connecting to the remote startup server...
2517 The remote startup service has stopped. Please check the error log file to find out the cause of the error.
2518 Remote startup failed. Please check the error log file to find out the cause of the error.
2519 The second remote boot (Remoteboot) resource connection is not allowed.
2550 Browse service set to MaintainServerList=No.
2610 The service cannot be started because there is no network card to start with this service.
2611 The service cannot be started because the startup information in the registry is incorrect.
2612 The service cannot be started because its database cannot be found or is corrupted.
2613 The service cannot be started because the resource shared by RPLFILES cannot be found.
2614 The service cannot be started because the RPLUSER group cannot be found.
2615 Unable to enumerate service records.
2616 The workstation record information is corrupted.
2617 Workstation record not found.
2618 Another workstation is using this workstation name.
2619 The profile record is corrupted.
2620 Configuration file record not found.
2621 Another configuration file is using this name.
2622 There are many workstations using this profile.
2623 The configuration record is corrupted.
2624 Configuration record not found.
2625 The adapter identification record is corrupted.
2626 Internal service error.
2627 The supplier identification record is corrupted.
2628 The boot block record is corrupted.
2629 The user account record for this workstation cannot be found.
2630 RPLUSER local group not found.
2631 Boot block record not found.
2632 The selected profile is incompatible with this workstation.
2633 Another workstation is using the selected network card.
2634 Some profiles are using this configuration.
2635 Several workstations, profiles, or configurations are using this startup block.
2636 The service cannot make a backup of the remote startup database.
2637 Adapter record not found.
2638 Supplier record not found.
2639 Another supplier record is using this supplier name.
2640 Another launch zone record is using a launch name or vendor identification record.
2641 Another configuration is using this configuration name.
2660 The internal database maintained by the Dfs service is corrupted
2661 A record in the internal database is corrupted
2662 The input path does not match the volume path
2663 The given volume name already exists
2664 The specified server share is already shared in Dfs
2665 The displayed server share does not support the displayed Dfs volume
2666 This operation has no effect on non-leaf volumes.
2667 This operation has no effect on leaf volumes.
2668 This operation is ambiguous because multiple servers exist for this volume.
2669 Unable to create join point
2670 The server is not recognized by Dfs
2671 The specified rename target path is invalid.
2672 The specified Dfs volume is offline
2673 The specified server does not serve this volume
2674 A loop in the Dfs name is detected
2675 This operation is not supported on server-based Dfs
2676 This volume is already supported by the specified server share
2677 The previous server share support for this volume cannot be deleted
2678 The Inter-Dfs volume does not support this operation
2679 The internal state of the Dfs service has become inconsistent
2680 The Dfs service has been installed on the specified server
2681 The coordinated Dfs data is the same
2682 The Dfs root volume cannot be deleted - please uninstall Dfs if necessary
2683 The shared subdirectory or The parent directory already exists in a Dfs
2690 Dfs internal error
2691 This machine is already joined to the domain.
2692 This machine is not currently joined to a domain.
2693 This machine is a domain controller and cannot exit the domain.
2694 The target domain controller does not support the machine account created in the OU.
2695 The specified workgroup name is invalid
2696 The specified computer name is incompatible with the default language used on the domain controller.
2697 The specified computer account cannot be found.
2999 This is the last error in NERR scope.
3000 An unknown print monitor was specified.
3001 The specified printer driver is currently in use.
3002 Buffer file not found.
3003 StartDocPrinter call not sent.
3004 AddJob call not sent.
3005 The specified print processor is already installed.
3006 The specified print monitor is already installed.
3007 The specified print monitor does not have the requested functionality.
3008 The specified print monitor is in use.
3009 This operation request is not allowed when the printer has jobs queued.
3010 The requested operation was successful. Changes will not take effect until the system is restarted.
3011 The requested operation was successful. Changes will not take effect until the service is restarted.
3012 Printer not found.
3023 There is a problem with the configuration of the shutdown command file specified by the user. However, the UPS service has started.
3029 The local security mechanism cannot be started because the user account database (NET.ACC) cannot be found or is damaged, and there is no backup database available. The system is not safe!
3037 @I *Login hours
3039 The limit for copying copies of files in a directory has been exceeded.
3040 The directory tree depth limit for replica replication has been exceeded.
3046 Unable to log in. The user is currently logged in and the parameter TRYUSER is set to NO.
3052 The necessary parameters are not provided in the command line or configuration file.
3054 The request for the resource cannot be fulfilled.
3055 There is a problem with the system configuration.
3056 System error.
3057 An internal consistency error occurred.
3058 The configuration file or command line option is unclear.
3059 Duplicate parameters in the configuration file or command line.
3060 The service does not respond to control, and the DosKillProc function has stopped the service.
3061 An error occurred while running the service program.
3062 Unable to start secondary service.
3064 There is a problem with the file.
3070 Memory
3071 Disk Space
3072 Threads
3073 Process
3074 Security failed.
3075 The LAN Manager root directory is incorrect or cannot be found.
3076 Network software is not installed.
3077 The server is not started.
3078 The server cannot access the user account database (NET.ACC).
3079 The files installed in the LANMAN tree are incompatible.
3080 The LANMAN\LOGS directory is invalid.
3081 The specified domain cannot be used.
3082 Another computer is using this computer name as a message alias.
3083 Failed to declare server name.
3084 The user account database is not configured correctly.
3085 The server is not running user-level security features.
3087 The workstation settings are incorrect.
3088 Check your error log file for details.
3089 Unable to write to this file.
3090 ADDPAK file is corrupted. Please delete LANMAN\NETPROG\ADDPAK.SER and reapply all ADDPAKs.
3091 The LM386 server cannot be started because CACHE.EXE is not running.
3092 The account for this computer was not found in the security database.
3093 This computer is not a member of the SERVERS group.
3094 The SERVERS group is not in the local security database.
3095 This Windows NT computer is set up as a member of a group and is not a member of the domain. There is no need to run the Netlogon service in this configuration.
3096 The Windows NT domain controller for this domain cannot be found.
3098 The service cannot authenticate with the primary domain controller.
3099 There is a problem with the creation date or serial number of the security database file.
3100 The operation cannot be performed because of a network software error.
3102 The service cannot long-term lock a segment of a Network Control Block (NCB). The error code is the relevant data.
3103 This service was unable to release a long-term lock on a Network Control Block (NCB) segment. The error code is the relevant data.
3106 An unexpected Network Control Block (NCB) was received. NCB is the relevant data.
3107 The network is not started.
3108 DosDevIoctl or DosFsCtl call for NETWKSTA.SYS failed. The data displayed is in the following format: DWORD value representing the CS:IP of the call to Ioctl or FsCtl WORD Error code WORD Ioctl or FsCtl number
3111 An unexpected NetBIOS error occurred. The error code is the relevant data.
3112 An invalid Server Message Block (SMB) was received. SMB is all about relevant data.
3114 Because of buffer overflow, some items in the error log file are lost.
3120 The initialization parameter that controls resource usage outside the network buffer is set to a size that requires too much memory.
3121 The server cannot increase the size of the memory segment.
3124 Server startup failed. The three chdev parameters must be either zero or non-zero at the same time.
3129 The server cannot update the AT plan file. damaged file.
3130 An error occurred while the server was calling NetMakeLMFileName. The error code is the relevant data.
3132 Unable to lock server buffer long term. Please check the free space on the swap disk and then restart the system to start the server.
3140 Service stopped because of multiple consecutive Network Control Block (NCB) errors. The last bad NCB appears in raw data form.
3141 The message server has stopped running because the data segment shared by the message server is locked.
3151 The pop-up display message cannot be displayed because of an error in the VIO call. The error code is the relevant data.
3152 An invalid Server Message Block (SMB) was received. SMB is all about relevant data.
3160 The workstation information segment is larger than 64K. The size is as follows (in DWORD value format):
3161 The workstation cannot obtain the computer's name number.
3162 The workstation cannot initialize the Async NetBIOS thread. The error code is the relevant data.
3163 The workstation cannot open the frontmost shared segment. The error code is the relevant data.
3164 The workstation host table is full.
3165 There is a problem with the mailbox server message block (SMB) received, the SMB is the associated data.
3166 An error occurred while the workstation started the user account database. The error code is the relevant data.
3167 An error occurred while the workstation responded to an SSI reauthentication request. Function codes and error codes are relevant data.
3174 The server cannot read the AT plan file.
3175 The server found the wrong AT plan record.
3176 The server cannot find the AT plan file, so a plan file is created.
3185 The local security mechanism cannot be started because the user account database (NET.ACC) cannot be found or is damaged and there is no backup database available. The system is not safe!
3204 The server cannot create a thread. The THREADS parameter in CONFIG.SYS must be increased.
3213 The copy limit for files in a directory has been exceeded.
3214 The directory tree depth limit for replica replication has been exceeded.
3215 The message received in the mailbox cannot be recognized.
3217 Unable to log in. The user is currently logged in and the parameter TRYUSER is set to NO.
3230 A power outage to the server was detected.
3231 The UPS service has shut down the server.
3232 The UPS service did not complete the execution of the shutdown command file specified by the user.
3233 Unable to open UPS driver. The error code is the relevant data.
3234 Power has been restored.
3235 There is a problem with the user-specified shutdown command file.
3256 An unrepairable error occurred in the dynamic link library of this service.
3257 The system returned an unexpected error code. The error code is the relevant data.
3258 The fault tolerance error log file - LANROOT\LOGS\FT.LOG exceeds 64K.
3259 The fault tolerance error log file - LANROOT\LOGS\FT.LOG, has the update progress bit set when it is opened, which means that the system crashed the last time the error log was used.
3301 Remote IPC
3302 Remote Admin
3303 Logon server share
3304 Network error.
3400 Insufficient memory and cannot start the workstation service.
3401 Error reading LAMAN.INI file for NETWORKS project.
3404 Too many NETWORKS items in the LAMAN.INI file.
3408 The program cannot be used on this operating system.
3409 The forwarder has been installed.
3411 Error installing NETWKSTA.SYS. Please press ENTER to continue.
3412 Solve the program link problem.
3419 You have opened a file or device. Forcibly disconnecting it will cause data loss.
3420 Default share for internal use
3421 Messenger service
3500 The command completed successfully.
3501 The option used is invalid.
3503 The command contains an invalid number of parameters.
3504 The command completed but one or more errors occurred.
3505 The option value used is incorrect.
3510 Command uses conflicting options.
3512 The software requires a new version of the operating system.
3513 More data than Windows 2000 can return.
3515 This command can only be used on Windows 2000 domain controllers.
3516 This directive cannot be used with a Windows 2000 domain controller.
3520 The following Windows 2000 services have been started:
3525 Stopping the workstation service will also stop the server service.
3526 The workstation has an open file.
3533 The service is starting or stopping. Please wait for a while and try again.
3534 The service reported no errors.
3535 An error occurred while controlling the device.
3660 These workstations have sessions on this server:
3661 These workstations have sessions that open files on this server:
3666 The message alias has been forwarded.
3670 You have the following remote connections:
3671 Continuing to run will cancel the connection.
3676 New network connections will be logged.
3677 New network connections are not logged.
3678 An error occurred while saving the configuration file. The network connection status originally recorded has not changed.
3679 An error occurred while reading the configuration file.
3682 No network service is started.
3683 The list is empty.
3689 The workstation service is already running and Windows 2000 ignores the workstation command option.
3694 Unable to delete a shared queue while a print job is being spooled to the queue.
3710 An error occurred while opening the help file.
3711 The help file is empty.
3712 The help file is damaged.
3714 This is an operation provided only for systems with older versions of software installed.
3716 The device type is unknown.
3717 The log file is corrupted.
3718 The program file name must end with .EXE.
3719 No matching share found and therefore not deleted.
3720 The value for "unit/week" in the user record is incorrect.
3725 An error occurred while deleting the share.
3726 The username is invalid.
3727 The password is invalid.
3728 Password does not match.
3729 Persistent connections were not fully restored.
3730 The computer name or domain name is incorrect.
3732 Unable to set default permissions for this resource.
3734 The correct password was not entered.
3735 The correct name was not entered.
3736 This resource cannot be shared.
3737 Permission string contains invalid permissions.
3738 You can only perform this operation on a printer or communications device.
3743 The server does not have remote management capabilities.
3752 There is no user session on this server.
3756 Invalid response.
3757 No valid response was provided.
3758 The supplied target list does not match the printer queue target list.
3761 The specified time range ends earlier than the start time.
3764 The time provided is not on the hour.
3765 12 and 24 hour formats cannot be mixed.
3767 The date format provided is invalid.
3768 The date range provided is invalid.
3769 The provided time range is invalid.
3770 The parameter for NET USER is invalid. Please check minimum password length and/or provide parameters.
3771 The value of ENABLESCRIPT must be YES.
3773 The country code provided is invalid.
3774 The user has been created successfully, but cannot be added to the USERS local group.
3775 The provided user context is invalid.
3777 The file sending function is no longer supported.
3778 You may not have specified the path to the ADMIN$ and IPC$ shares.
3784 Only disk shares can be marked as cacheable.
3802 This scheduled date is invalid.
3803 The LANMAN root directory cannot be used.
3804 The SCHED.LOG file cannot be opened.
3805 The server service has not been started.
3806 AT job ID does not exist.
3807 AT plan file is corrupted.
3808 The delete operation cannot be run because of a problem with the AT plan file.
3809 The command line must not exceed 259 characters.
3810 The AT plan file cannot be updated because the disk is full.
3812 AT plan file is invalid. Please delete this file and create a new one.
3813 AT plan file has been deleted.
3814 The syntax of this command is: AT [id] [/Delete] AT time [/EVERY:date | /NEXT:date] Command The AT command will schedule the program to run on the server at the specified date and time in the future. It also displays a list of programs and commands scheduled to run. You can specify the date in the format M, T, W, Th, F, Sa, Su, or 1-31. You can specify the time as HH:3814
3815 The AT command has timed out. Please try again later.
3816 The minimum password age for a user account must not be greater than the maximum password age.
3817 The specified value is incompatible with the server on which the underlying software is installed. Please specify a smaller value.
3901 ****
3902 **** End of message reached unexpectedly ****
3905 Please press ESC to exit
3906 ...
3912 Time server not found.
3915 Unable to determine the user's home directory.
3916 The user's home directory is not specified.
3920 There is no drive letter available.
3936 This computer is not currently configured to use a specified SNTP server.
3953 Syntax error.
3960 The specified file number is invalid.
3961 The specified print job number is invalid.
3963 The specified user or group account cannot be found.
3965 The user was added, but NetWare's file and print services could not be enabled.
3966 NetWare File and Print Services is not installed.
3967 Unable to set user properties for NetWare's file and print services.
3969 NetWare Compatible Login
4000 WINS encountered an error while processing the command.
4001 The local WINS cannot be deleted.
4002 File import operation failed.
4003 The backup operation failed. Has a full backup been made previously?
4004 The backup operation failed. Please check the directory where you backed up your database.
4005 This name does not exist in the WINS database.
4006 Replication of an unconfigured partner is not allowed.
4100 DHCP client obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
4200 The passed GUID was not recognized as a valid WMI data provider.
4201 Unable to identify whether the instance name passed is a valid WMI data provider.
4202 The passed data item identifier was not recognized as a valid WMI data provider.
4203 Unable to complete WMI request, should try again.
4204 WMI data provider not found.
4205 The WMI data provider references an unregistered instance group.
4206 WMI block or event notification is enabled.
4207 WMI data block is no longer available.
4208 WMI data service cannot be used.
4209 The WMI data provider cannot complete the request.
4210 WMI MOF information is invalid.
4211 WMI registration information is invalid.
4212 WMI data block or event notification is disabled.
4213 The WMI data item or data block is read-only.
4214 WMI data item or data block cannot be changed.
4300 The media identifier does not represent a valid media.
4301 The library identifier does not represent a valid library.
4302 The media pool identifier does not represent a valid media pool.
4303 The drive and media are incompatible or in different libraries.
4304 The media is currently in the offline library, you must be online to run this operation.
4305 Operation cannot be run in an offline library.
4306 The library, drive, or media buffer pool is empty.
4307 The library, disk, or media buffer pool must be empty to run this operation.
4308 There is currently no media available in this media pool or library.
4309 The resource required for this operation is disabled.
4310 The media identifier does not represent a valid scrubber.
4311 The drive cannot be cleaned or cleaning is not supported.
4312 The object identifier does not represent a valid object.
4313 Unable to read or write to the database.
4314 Database is full.
4315 The media is incompatible with the device or media pool.
4316 The resource required for this operation does not exist.
4317 The operation identifier is incorrect.
4318 The media is not mounted, or is not ready.
4319 The device is not ready.
4320 The request was denied by the operator or system administrator.
4321 The drive identifier does not represent a valid drive.
4322 The library is full. There are no available slots.
4323 The transfer program cannot access the media.
4324 Unable to load media into drive.
4325 Unable to retrieve status about the drive.
4326 Unable to retrieve status about the slot.
4327 Unable to retrieve the status of the transfer.
4328 The transport cannot be used because it is already in use.
4329 Unable to open or close the pop/pop port.
4330 The media cannot be ejected because it is in the drive.
4331 Cleaner slot has been reserved.
4332 No cleaner slot reserved.
4333 The cleaner cartridge has undergone the maximum number of drive cleanings.
4334 Unexpected media identification number.
4335 The last remaining item in this group or source cannot be deleted.
4336 The message provided exceeds the maximum size allowed by this parameter.
4337 This volume contains system and page files.
4338 The media type cannot be removed from the library because at least one drive in the library can support the media type.
4339 The offline media cannot be mounted on this system because there is no bootable drive available.
4340 (Y/N) [Y]
4341 (Y/N) [N]
4342 Error
4343 OK
4344 Y
4345 N
4346 Any
4347 A
4348 P
4349 (Not Found)
4350 The remote storage service cannot recall the file.
4351 The remote storage service is not operational at this time.
4352 The Remote Storage Service encountered a media error.
4354 Please type the password:
4358 Please type the user's password:
4359 Please type the password of the shared resource:
4360 Please type your password:
4361 Please type the password again for confirmation :
4362 Please type the user's old password:
4363 Please type the user's new password:
4364 Please type your new password:
4365 Please type the replicator service password:
4368 Please Type your username:
4372 Print job details
4378 Control the following running services:
4379 Statistics are available for the following running services:
4381 The syntax for this command is:
4382 The options for this command are:
4383 Please type the name of the primary domain controller:
4385 Sunday
4386 Monday
4387 Tuesday
4388 Wednesday
4389 Thursday
4390 This file or directory is not a reparse point.
4391 The reparse point attribute cannot be set because it conflicts with an existing attribute.
4392 Invalid data in reparse point buffer.
4393 Invalid label in reparse point buffer.
4394 There is a mismatch between the label specified in the request and the reparse point.
4395 W
4396 Th
4397 F
4398 S
4399 Sa
4401 Group Name
4402 Comment
4403 Member
4406 Alias
4407 Comment
4408 Member
4411 Username
4412 Full name
4413 Comment
4414 User's comment
4415 Parameter
4416 Country (region) code
4417 Permission level
4418 Operator Privileges
4419 Account Enabled
4420 Account Expired
4421 Last Password Set
4422 Password Expired
4423 Password Can Be Changed
4424 Allowed Workstations
4425 Maximum disk space
4426 Unlimited
4427 Local group membership
4428 Domain controller
4429 Login script
4430 Last login
4431 Global group membership
4432 Number of login hours allowed
4433 All
4434 None
4436 Home directory
4437 Password required
4438 User can change password
4439 User profile
4440 Locked
4450 Computer name
4451 User name
4452 Software version
4453 Workstation activity in
4454 Windows NT root directory
4455 Workstation domain
4456 Login domain
4457 Other domains
4458 COM open timeout (seconds)
4459 COM send count (bytes)
4460 COM send timeout (milliseconds)
4461 DOS session print timeout (seconds)
4462 Error log file size Upper limit (K)
4463 Cache upper limit (K)
4464 Number of network buffers
4465 Number of character buffers
4466 Domain buffer size
4467 Character buffer size
4468 Full Computer Name
4469 Workstation Domain DNS Name
4470 Windows 2000
4481 Server Name
4482 Server Comment
4483 Send Management Alerts to
4484 Software Version
4485 Peer Server
4486 Windows NT
4487 Server Level
4488 Windows NT Server
4489 Server is running on
4492 Server is hidden
4500 Zero backup storage is not available on this volume.
4506 The upper limit of the number of logged-in users
4507 The upper limit of the number of concurrent administrators
4508 The upper limit of the number of resource sharing
4509 The upper limit of the number of resource connections
4510 The upper limit of the number of files opened by the server
4511 Maximum number of open files per session
4512 Maximum number of file locks
4520 Idle session time (minutes)
4526 Sharing level
4527 User level
4530 Unrestricted server
4570 How long does it take to force a user to log out after the time expires?:
4571 How many times does the account have to be locked after the password is incorrect?:
4572 Minimum password usage period (days):
4573 Maximum password usage period (days):
4574 Minimum password length:
4575 Password history length to keep:
4576 Computer role:
4577 Primary domain controller for the workstation domain:
4578 Lockout threshold:
4579 Lock duration (minutes):
4580 Lock observation window (minutes):
4600 Statistics started at
4601 Accepted sessions
4602 Session timeout
4603 Session error
4604 KB sent
4605 KB received
4606 Average response time (milliseconds)
4607 Network error
4608 File accessed
4609 Spooled print job
4610 System error
4611 Password Violation
4612 Permission Violation
4613 Accessed Communication Device
4614 Session Started
4615 Reconnected Session
4616 Session Start Failed
4617 Disconnected Session
4618 Network I/O execution
4619 Files and pipes are accessed
4620 Time buffer exhausted
4621 Large buffer
4622 Request buffer
4626 Connection has been made
4627 Connection failed
4630 Number of bytes received
4631 Server Message Block (SMB) received
4632 Number of bytes transmitted
4633 Server Message Block (SMB) transmitted
4634 Read Fetch operation
4635 Write operation
4636 Reject original read
4637 Reject original write
4638 Network error
4639 Already connected
4640 Reconnect
4641 Server disconnected Open
4642 Session started
4643 Session hung
4644 Failed session
4645 Operation failed
4646 Usage count
4647 Usage count failed
4655 Message name forwarding has been canceled .
4661 The password has been changed successfully.
4664 The message has been sent to all users on the network.
4666 The message has been sent to all users on this server.
4696 Windows NT Server
4697 Windows NT Workstation
4698 MS-DOS Enhanced Workstation
4700 Server Name Comment
4701 Resource Share Name Type Usage Comment
4702 (UNC)
4703 ...
4704 Domain
4706 Other available networks:
4710 Disk
4711 Print
4712 Comm
4713 IPC
4714 Status Local Remote Network
4715 OK
4716 Paused
4717 Paused
4718 Disconnected
4719 Error
4720 Connecting
4721 Reconnecting
4722 Status
4723 Local Name
4724 Remote Name
4725 Resource Type
4726 # Open
4727 # Connection
4728 Unavailable
4730 Share Name Resource Comment
4731 Share Name
4732 Resource
4733 Background processing
4734 Permissions
4735 Maximum users
4736 Unlimited
4737 Users
4740 Identification code path Username# Lock
4741 File identification code
4742 Lock
4743 Permissions
4750 Computer Username Client Type Open Idle Time
4751 Computer
4752 Session Time
4753 Idle Time
4754 Resource Share Name Type # Open
4755 Client Type
4756 Guest login
4770 Offline cache is enabled: Manual recovery
4771 Offline cache is enabled: Automatic recovery
4772 Offline cache is enabled: No sharing between users
4773 Offline cache is enabled Deactivate
4774 Automatic
4775 Manual
4800 Name
4801 Forwarded to
4802 Already forwarded to you from
4803 User of this server
4804 User has pressed Ctrl+Break interrupts network sending.
4810 Name Job Number Size Status
4811 Job
4812 Print
4813 Name
4814 Job
#4815 Size
4816 Status
4817 Delimited File
4818 Comments
4819 Priority
4820 Print after
4821 Print until
4822 Print handler
4823 Additional information
4824 Parameters
4825 Print device
4826 Printer activity Medium
4827 Printer on hold
4828 Printer error
4829 Deleting printer
4830 Printer status unknown
4841 Job
#4842 Submitting user
4843 Notification
4844 Job Data type
4845 Job parameters
4846 Waiting
4847 On hold in queue
4848 Processing in background
4849 Paused
4850 Offline
4851 Error
4852 Missing Paper
4853 Intervention Required
4854 Printing
4855 on
4862 Driver
4930 Username Type Date
4931 Locked
4932 Service
4933 Server
4934 Server started
4935 Server paused
4936 Server has continued operation
4937 Server stopped
4938 Session
4939 Login guest
4940 Login user
4941 Login administrator
4942 Normal logout
4943 Login
4944 Logout error
4945 Logout automatically disconnects
4946 Logout administrator disconnects
4947 Logout is restricted by login
4948 Service
4957 Account
4964 Account system settings have been modified
4965 Login limit
4966 Limit exceeded: Unknown
4967 Limit exceeded: Login time
4968 Limit exceeded: Account expired
4969 Limit exceeded: Invalid workstation ID
4970 Limit exceeded: Account deactivated
4971 Limit exceeded: Account deleted
4972 Resource
4978 Incorrect password
4979 Administrator privileges required
4980 Access
4984 Access Denied
4985 Unknown
4986 Other
4987 Duration:
4988 Duration: Invalid
4989 Duration: Less than 1 second
4990 (None)
4994 Access ended
4995 Log in to the network
4996 Login denied
4997 Program message time
4999 The administrator has unlocked the account
5000 Log out of the network
5001 Because other resources require it , cluster resources cannot be moved to another group.
5002 No dependencies found for this cluster resource.
5003 This cluster resource cannot depend on the specified resource because it is already in a dependent state.
5004 This cluster resource is not online.
5005 There are no cluster nodes available for this operation.
5006 No cluster resources.
5007 Cluster resource not found.
5008 Shutting down the cluster.
5009 The cluster node cannot detach from the cluster because it is online.
5010 The object already exists.
5011 This object is already in the list.
5012 No cluster group available for new request.
5013 Cluster group not found.
5014 This operation cannot be completed because the cluster group is not online.
5015 The cluster node is not the owner of this resource.
5016 The cluster node is not the owner of this resource.
5017 The cluster resource cannot be created in the specified resource monitor.
5018 The cluster resource cannot be brought online through Resource Monitor.
5019 This operation cannot be completed because the cluster resource is online.
5020 Because it is a quorum resource, the cluster resource cannot be deleted or taken offline.
5021 This cluster cannot make the specified resource a quorum resource due to the inability to become a quorum resource.
5022 The cluster software is shutting down.
5023 The state of the group or resource is not the correct state to perform the requested operation.
5024 The properties have been stored, but not all modifications will take effect until the next time the resource comes online.
5025 The cluster cannot make the specified resource a quorum resource because it does not belong to the shared storage category.
5026 The cluster resource cannot be deleted because it is a kernel resource.
5027 The arbitration resource failed to come online.
5028 Unable to successfully create or load the quorum log.
5029 The cluster log is corrupted.
5030 Unable to write records to the cluster log because the log has exceeded the maximum limit.
5031 The cluster log has exceeded the maximum limit.
5032 No checkpoint record found in the cluster log.
5033 The minimum disk space required for the log is not met.
5034 The cluster node failed to control the quorum resource because it is owned by another active node.
5035 The cluster network for this operation is invalid.
5036 There are no cluster nodes available for this operation.
5037 All cluster nodes must be running to perform this operation.
5038 Cluster resource failed.
5039 The cluster node is invalid.
5040 The cluster node already exists.
5041 A node is joining the cluster.
5042 Cluster node not found.
5043 Cluster local node information cannot be found.
5044 A cluster network already exists.
5045 Cluster network not found.
5046 The cluster network interface already exists.
5047 The cluster network interface cannot be found.
5048 The cluster request is not valid on this object.
5049 The cluster network provider is invalid.
5050 The cluster node is broken.
5051 Unable to connect to cluster node.
5052 The cluster node is not a member of the cluster.
5053 Cluster join operation is in progress.
5054 The cluster network is invalid.
5055 Mar
5056 The cluster node is ready for use.
5057 The cluster IP address is already in use.
5058 The cluster node did not terminate.
5059 There is no valid cluster security context.
5060 The cluster network is not configured for internal cluster communication.
5061 Cluster node has started.
5062 The cluster node is broken.
5063 The cluster network is online.
5064 The cluster network is offline.
5065 The cluster node is already a member of the cluster.
5066 This cluster network is the only configuration for inter-cluster communication between two or more active cluster nodes. Internal communications capabilities cannot be removed from the network.
5067 One or more cluster resources rely on the network to provide services to clients. Customer access capabilities cannot be removed from the network.
5068 This operation cannot be performed on a cluster resource as a quorum resource. You cannot take a quorum resource offline or modify its owner list.
5069 This cluster quorum resource does not allow any dependencies.
5070 The cluster node is paused.
5071 The cluster resource cannot be brought online. The owner node cannot run on this resource.
5072 The cluster node is not ready to perform the requested operation.
5073 Cluster node is shutting down.
5074 Abandon the cluster node join operation.
5075 The cluster join operation failed due to software version incompatibility between the joining node and the backer.
5076 This resource cannot be created because the cluster has reached the limit of resources it can supervise.
5077 The system configuration was changed during a cluster join or form operation. Abandon join or form operation.
5078 The specified resource type cannot be found.
5079 The specified node does not support this resource, either due to version inconsistency or because there is no resource DLL on this node.
5080 The resource DLL does not support the specified resource name. This may be due to a wrong (or changed) name provided to the source DLL.
5081 Unable to register any authentication package on the RPC server.
5082 The group cannot be brought online because the owner of the group is not in the group's preferred list. To change the group's owner node, move the group.
5083 The cluster database's serial number has changed or is incompatible with the lock program node, so the join operation was not successful. This can happen if there are any changes to the cluster database during the join operation.
5084 The resource monitor does not allow the failed operation in its current state. This can happen while the resource is in a pending state.
5085 Non-locking program code received a request to reserve a lock for a global update.
5086 The cluster service cannot find the quorum disk.
5087 The backed up cluster database may be corrupted.
5088 The DFS root directory is already in this cluster node.
5089 The resource property could not be modified due to a conflict with another existing property.
5090 Spain
5091 Denmark
5092 Sweden
5093 Norway
5094 Germany
5095 Australia
5096 Japan
5097 South Korea
5098 China
5099 Taiwan
5100 Asia
5101 Portugal
5102 Finland
5103 Arabia
5104 Hebrew
5153 The UPS service is about to perform its final shutdown operation.
5170 The workstation must be started with NET START.
5175 Remote IPC
5176 Remote Management
5177 Default Share
5291 Never
5292 Never
5293 Never
5295 NETUS.HLP
5296 NET.HLP
5300 Network Control Block (NCB) request ran successfully. NCB is relevant data.
5301 Invalid network control block (NCB) buffer length for SEND DATAGRAM, SEND BROADCAST, ADAPTER STATUS, or SESSION STATUS. NCB is relevant data.
5302 The data description array specified by the network control block (NCB) is invalid. NCB is relevant data.
5303 The network control block (NCB) specified command is invalid. NCB is relevant data.
5304 The network control block (NCB) specified an invalid message exchange code. NCB is relevant data.
5305 Network Control Block (NCB) command timed out. The session may have terminated abnormally. NCB is relevant data.
5306 An incomplete Network Control Block (NCB) message was received. NCB is relevant data.
5307 The buffer specified by the network control block (NCB) is invalid. NCB is relevant data.
5308 The session number specified by the network control block (NCB) has no effect. NCB is relevant data.
5309 The network card does not have any resources available. Network Control Block (NCB) request denied. NCB is relevant data.
5310 The session specified by the Network Control Block (NCB) has been closed. NCB is relevant data.
5311 Network Control Block (NCB) command has been canceled. NCB is relevant data.
5312 The message block specified by the Network Control Block (NCB) is illogical. NCB is relevant data.
5313 The name already exists in the local adapter name table. Network Control Block (NCB) request denied. NCB is relevant data.
5314 The network card name table is full. Network Control Block (NCB) request denied. NCB is relevant data.
5315 The network name already has an active session and is now unregistered. The Network Control Block (NCB) command has finished running. NCB is relevant data.
5316 Previously issued Receive Lookahead commands still have effect on this session. Network Control Block (NCB) command rejected. NCB is relevant data.
5317 The local session table is full. Network Control Block (NCB) request denied. NCB is relevant data.
5318 Rejection of opening a Network Control Block (NCB) session, there are no listening commands executing on the remote computer. NCB is relevant data.
5319 The network control block (NCB) specified name number is invalid. NCB is relevant data.
5320 The call name specified in the network control block (NCB) was not found or was not answered. NCB is relevant data.
5321 The name specified in the Network Control Block (NCB) cannot be found. Unable to fill in NCB name with "*" or 00h. NCB is relevant data.
5322 The name specified in the Network Control Block (NCB) is being used for the remote adapter. NCB is relevant data.
5323 The name specified in the Network Control Block (NCB) has been deleted. NCB is relevant data.
5324 The session specified in the Network Control Block (NCB) terminated abnormally. NCB is relevant data.
5325 Network protocol detects two or more identical names on the network. Network Control Blocks (NCBs) are related data.
5326 Unexpected protocol packet received. The remote device may be incompatible. Network Control Blocks (NCBs) are related data.
5333 The NetBIOS interface is busy. Network Control Block (NCB) request denied. NCB is relevant data.
5334 Too many outstanding Network Control Block (NCB) commands. NCB request denied. NCB is relevant data.
5335 The adapter number specified in the network control block (NCB) is invalid. NCB is relevant data.
5336 Network Control Block (NCB) command completed while canceling. NCB is relevant data.
5337 The name specified by the Network Control Block (NCB) is already reserved. NCB is relevant data.
5338 Network Control Block (NCB) command cannot be canceled. NCB is relevant data.
5351 There are multiple network control blocks (NCBs) for the same session. NCB request denied. NCB is relevant data.
5352 Network card error. The only NetBIOS command that may be issued is NCB RESET. Network Control Blocks (NCBs) are related data.
5354 The maximum number of applications has been exceeded. Network Control Block (NCB) request denied, NCB is relevant data.
5356 The requested resource cannot be used. Network Control Block (NCB) request denied. NCB is relevant data.
5364 System error. Network Control Block (NCB) request denied. NCB is data.
5365 "ROM Checksum" failed. Network Control Block (NCB) request denied. NCB is relevant data.
5366 RAM test failed. Network Control Block (NCB) request denied. NCB is relevant data.
5367 Digital loopback failed. Network Control Block (NCB) request denied. NCB is relevant data.
5368 Analog loopback failed. Network Control Block (NCB) request denied. NCB is relevant data.
5369 Interface failed. Network Control Block (NCB) request denied. NCB is relevant data.
5370 The received Network Control Block (NCB) return code was unrecognized. NCB is relevant data.
5380 Network card failure. Network Control Block (NCB) request denied. NCB is relevant data.
5381 Network Control Block (NCB) command remains pending. NCB is relevant data.
5509 Windows 2000 cannot start with the specified configuration and will use a previously working configuration instead.
5600 Unable to share user or script path.
5601 The computer's password was not found in the local security database.
5602 An internal error occurred while accessing the computer's local or network security database.
5705 The log cache used by the Netlogon service to record database change data is corrupted. The Netlogon service is resetting the change log file.
5728 Unable to load any transports.
5739 The number of global groups for this domain exceeds the limit that can be replicated to the LanMan BDC. Please delete some of the global groups or delete the LanMan BDC in the domain.
5742 The service was unable to retrieve the necessary messages so it could not run the remote start client.
5743 A serious service error occurred and the 3Com 3Start Remote Start client cannot be started remotely.
5744 A serious system error occurred in the service and it will be shut down soon.
5760 The service encountered an error while parsing the RPL configuration.
5761 The service encountered an error while creating the RPL profile for all configurations.
5762 The service encountered an error while accessing the registry.
5763 Service error while replacing RPLDISK.SYS which may be out of date.
5764 The service encountered an error while adding a security account or setting file permissions. These accounts are the RPLUSER local group and the user account for the stand-alone RPL workstation. .
5765 The service was unable to back up its database.
5766 The service failed to initialize from its database. The database may not be found or is corrupt. The service attempts to restore the database from the backup database.
5767 The service was unable to restore its database from the backup database. The service will not start.
5768 The service was unable to restore its database from the backup database.
5769 The service failed to initialize from the database it restored. The service will not start.
5771 The remote boot database is in NT 3.5 / NT 3.51 format. NT is converting it to NT 4.0 format. After completing the conversion, the JETCONV converter writes out the application event log.
5773 This DC's DNS server does not support dynamic DNS. Add the DNS records in the file 'SystemRoot\System32\Config\netlogon.dns' to the DNS servers serving the domains referenced in that file.
5781 Dynamic registration and deregistration of one or more DNS records was unsuccessful because no DNS server was available.
6000 Unable to encrypt the specified file.
6001 The specified file cannot be decrypted.
6002 The specified file is encrypted and the user does not have the ability to decrypt it.
6003 This system does not have a valid encryption recovery policy configured.
6004 The required encryption driver is not loaded into the system.
6005 File encryption uses a different encryption driver than the one currently loaded.
6006 No EFS keyword defined for user.
6007 The specified file is not encrypted.
6008 The specified file is not in the defined EFS export format.
6009 The specified file is read-only.
6010 Directory disabled for encryption.
6011 The server is not trusted for remote encryption operations.
6118 The server list for this workgroup is currently unavailable
6200 To function properly, the configuration of the Task Scheduler service must run in the System account. Individual tasks can be configured to run in other accounts.
7001 The specified session name is invalid.
7002 The specified protocol driver is invalid.
7003 The specified protocol driver was not found on the system path.
7004 The specified terminal connection was not found on the system path.
7005 Unable to create an event log registration key for this session.
7006 A service with the same name already exists in the system.
7007 A close operation is pending on the session.
7008 No output buffer available.
7009 MODEM.INF file not found.
7010 Modem name not found in MODEM.INF.
7011 The modem did not accept the command sent to it. Verify that the configured modem matches the connected modem.
7012 The modem did not accept the command sent to it. Verify that the modem is wired correctly and the power switch is turned on.
7013 Carrier detection failed or the carrier has been dropped due to disconnection.
7014 No dial tone found within the requested time. Make sure the phone cord is properly connected and working.
7015 A busy signal was detected while the remote site was calling back.
7016 Sound was detected on the remote site during callback.
7017 Transport Driver Error
7022 The specified session could not be found.
7023 The specified session name is already in use.
7024 The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.
7025 An attempt was made to connect to a session whose video mode is not supported by the current client.
7035 The application attempted to start DOS graphics mode. DOS graphics mode is not supported.
7037 Your interactive login permission has been disabled. Please contact your administrator.
7038 The requested operation can only be performed on the system console. This is usually the result of a driver or system DLL requiring direct console access.
7040 The client failed to respond to the server connection message.
7041 Disconnecting console sessions is not supported.
7042 Reconnecting a disconnected session to the console is not supported.
7044 The request to remotely control another session was denied.
7045 Requested session access denied.
7049 The specified terminal connection driver is invalid.
7050 The requested session cannot be remotely controlled. This may be because the session was interrupted or no user is currently logged in. Also, you cannot remotely control a session or remotely control the system console from the system console. Also, you cannot remotely control your own current session.
7051 The requested session is not configured to allow remote control.
7052 Refused to connect to this terminal server. The Terminal Server client license is currently in use by another user. Please contact your system administrator to obtain a new Terminal Server client whose license number must be valid and unique.
7053 Refused to connect to this terminal server. You have not entered your Terminal Server Client license number for this Terminal Server Client. Please contact your system administrator to enter a valid, unique license number for this Terminal Server client.
7054 The system has reached its authorized login limit. Please try again later.
7055 The client you are using is not authorized to use the system. Your login request was denied.
7056 The system license has expired. Your login request was denied.
8001 The file copy service API was called incorrectly.
8002 Unable to start the file copy service.
8003 Unable to stop the file replication service.
8004 The File Replication Service API terminated the request. The event log may have detailed information.
8005 The file replication service aborted the request. The event log may have detailed information.
8006 Unable to contact the file replication service. The event log may have detailed information.
8007 The File Replication Service cannot fulfill the request because the user does not have sufficient privileges. The event log may have detailed information.
8008 The File Replication Service cannot fulfill the request because the authenticated RPC is invalid. The event log may have detailed information.
8009 The File Replication Service cannot fulfill the request because the user does not have sufficient privileges on the domain controller. The event log may have detailed information.
8010 The File Replication Service cannot fulfill the request because the authenticated RPC on the domain controller is invalid. The event log may have detailed information.
8011 The File Replication Service cannot communicate with the File Replication Service on the domain controller. The event log may have detailed information.
8012 The File Replication service on the domain controller cannot communicate with the File Replication service on this computer. The event log may have detailed information.
8013 The file copy service cannot access the system volume due to an internal error. The event log may have detailed information.
8014 The file copy service cannot access the system volume due to an internal timeout. The event log may have detailed information.
8015 The file replication service cannot handle this request. The system volume is still busy with the previous request.
8016 The File Replication Service cannot stop replicating the system volume due to an internal error. The event log may have detailed information.
8017 The file replication service detected an invalid parameter.
8200 An error occurred while installing directory services. Check the event log for details.
8201 Directory service evaluates group membership locally.
8202 The specified directory service attribute or value does not exist.
8203 The attribute syntax specified for the directory service is invalid.
8204 The attribute type assigned to the directory service is undefined.
8205 The specified directory service attribute or value already exists.
8206 Directory service is busy.
8207 The directory service is invalid.
8208 The directory service cannot assign a relative identification number.
8209 The directory service has exhausted its pool of relative identification numbers.
8210 The operation could not be performed because the directory service is not the master of this type of operation.
8211 The directory service cannot initialize the subsystem that assigns a relative identification number.
8212 The requested operation does not satisfy one or more constraints related to the object's class.
8213 The directory service can only run the requested operation on a page object.
8214 The directory service cannot perform the requested operation on an object's RDN attribute.
8215 Directory Service detected an attempt to modify an object's class.
8216 The requested move operation through the domain cannot be performed.
8217 Unable to contact the global catalog server.
8218 Policy objects are shared and can only be modified at the root directory.
8219 The policy object does not exist.
8220 The requested policy information is only in the directory service.
8221 Domain controller upgrade is currently in use.
8222 Domain controller upgrade is currently not in use
8224 An operational error occurred.
8225 A protocol error occurred.
8226 The time limit for this request has been exceeded.
8227 The size limit for this request has been exceeded.
8228 The administrative limit for this request has been exceeded.
8229 The response to the comparison is false.
8230 The response of the comparison is true.
8231 This server does not support the requested authentication method.
8232 This server requires a more secure authentication method.
8233 Improper authentication.
8234 Unknown authentication mechanism.
8235 A suggestion was returned from the server.
8236 The server does not support the requested critical extension.
8237 This request requires a secure connection.
8238 Inappropriate match.
8239 A constraint violation occurred.
8240 There is no such object on the server.
8241 There is an alias problem.
8242 An invalid dn syntax was specified.
8243 This object is a leaf object.
8244 There is an alias deprecation issue.
8245 The server is unwilling to process the request.
8246 A cycle was detected.
8247 There is a naming conflict.
8248 The resulting setting is too large.
8249 This operation affects multiple DSAs.
8250 The server is inoperable.
8251 A local error occurred.
8252 An encoding error occurred.
8253 A decoding error occurred.
8254 The seek filter is not recognized.
8255 One or more parameters are illegal.
8256 The specified method is not supported.
8257 No results returned.
8258 The server does not support the specified control.
8259 The client detected a reference cycle.
8260 Current reference limit exceeded.
8301 The root object must be the head of a naming context. The root object cannot have an instance parent class.
8302 The add replica operation cannot be performed. The name context must be writable to create a copy.
8303 A reference to a property that is not defined in the schema occurred.
8304 The maximum size of an object was exceeded.
8305 An attempt was made to add an object to the directory with a name that is already in use.
8306 An attempt was made to add an object that belongs to a class that does not have an RDN defined in the schema.
8307 An attempt was made to add an object using an RDN, but the RDN was not one defined in the schema.
8308 None of the requested properties were found in the object.
8309 User buffer is too small.
8310 The property specified in the operation does not appear on the object.
8311 The modification operation is illegal. An aspect of the modification is not allowed.
8312 The specified object is too large.
8313 The specified instance class is invalid.
8314 The operation must be performed on the master DSA.
8315 The object class attribute must be specified.
8316 A required property is missing.
8317 An attempt was made to modify an object to include an attribute that is illegal for the class.
8318 The property specified on the object already exists.
8320 The specified property does not exist or has a value.
8321 Multiple values ​​were specified for a property with only one value.
8322 The attribute value is not within the accepted range.
8323 The specified value already exists.
8324 The property cannot be deleted because it does not exist on the object.
8325 The attribute value cannot be deleted because it does not exist on the object.
8326 The specified root object cannot be a subreference.
8327 Link not allowed.
8328 Evaluation of links is not allowed.
8329 The operation cannot be performed because the object's parent class is either not instantiated or has been deleted.
8330 An aliased parent class is not allowed. Aliases are leaf objects.
8331 The object and parent class must be of the same type, either the original or the copy.
8332 The operation cannot be performed because the child object exists. This operation can only be performed on leaf objects.
8333 Directory object not found.
8334 Alias ​​object is missing.
8335 The object name syntax is incorrect.
8336 An alias is not allowed to reference another alias.
8337 Alias ​​cannot be dereferenced.
8338 The operation is out of scope.
8340 Cannot delete DSA object.
8341 A directory service error occurred.
8342 Operation can only be performed on internal master DSA objects.
8343 Object must be of DSA category.
8344 Insufficient access rights to perform this operation.
8345 The object cannot be added because the parent class is not on the list of possible ancestors.
8346 Access to this property is not allowed because it is under Security Accounts Manager (SAM).
8347 Name has too many parts.
8348 The name is too long.
8349 Name value is too long.
8350 Directory Service encountered a bad column name.
8351 The directory service cannot find an attribute type for a name.
8352 The name does not identify an object; the name identifies an phantom.
8353 Security descriptor is too short.
8354 The security descriptor is invalid.
8355 Failed to create name for deleted object.
8356 The parent class of a new child reference must exist.
8357 The object must be a naming context.
8358 Adding an attribute that does not belong to the system is not allowed.
8359 An object's class must be structured; you cannot instantiate an abstract class.
8360 The object of the schema cannot be found.
8361 A local object with this GUID (inactive or active) already exists.
8362 The operation cannot be performed on a rear link.
8363 The cross-reference for the specified naming context was not found.
8364 The operation cannot be performed because the directory service is down.
8365 Invalid directory service request.
8366 Unable to read role owner attribute.
8367 The requested FSMO operation failed. The current FSMO box cannot be connected.
8368 Modification of DN across a naming context is not allowed.
8369 This attribute cannot be modified because it belongs to the system.
8370 Only replicators can perform this function.
8371 The specified category is not defined.
8372 The specified category is not a subcategory.
8373 Invalid name reference.
8374 The cross-reference already exists.
8375 Deletion of a master cross-reference is not allowed.
8376 Subtree notifications are only supported on NC headers.
8377 Notification filter is too complex.
8378 Schema update failed: Duplicate RDN.
8379 Schema update failed: Duplicate OID.
8380 Schema update failed: Duplicate MAPI identifier.
8381 Schema update failed: Copying schema id GUID.
8382 Schema update failed: Duplicate LDAP display name.
8383 Schema update failed: Range lower is less than range upper.
8384 Schema update failed: Syntax mismatch.
8385 Schema update failed: Property used in a required include.
8386 Schema update failed: Property used in a possible include.
8387 Schema update failed: A property in the possible inclusion does not exist.
8388 Schema update failed: The property that must be included does not exist.
8389 Schema update failed: The category in the list of auxiliary categories does not exist or is not a auxiliary category.
8390 Schema update failed: Category in poss-superior does not exist.
8391 Schema update failed: The class in the subclassof list does not exist or does not satisfy the class rules.
8392 Schema update failed: Rdn-Att-Id syntax is incorrect.
8393 Schema update failed: Category used as auxiliary category.
8394 Schema update failed: Category used as subcategory.
8395 Schema update failed: Category used as poss superior.
8396 Schema update failed while recalculating validation cache.
8397 Directory tree deletion not completed. To continue deleting the directory tree, the request must be made again.
8398 The requested delete operation cannot be performed.
8399 Unable to read the schema record management class identifier.
8400 The attribute schema syntax is incorrect.
8401 The property cannot be cached.
8402 Category cannot be cached.
8403 The attribute cannot be deleted from the cache.
8404 Unable to remove category from cache.
8405 Unable to read attribute with special name.
8406 A required subreference is missing.
8407 Unable to retrieve the example type attribute.
8408 An internal error occurred.
8409 A data error occurred.
8410 A property GOVERNSID is missing.
8411 A required attribute is missing.
8412 The specified naming context is missing a cross-reference.
8413 A security check error occurred.
8414 Schema not loaded.
8415 Schema allocation failed. Please check whether the machine has insufficient memory.
8416 Failed to obtain required syntax for property schema.
8417 Global catalog verification failed. The global catalog is invalid or the operation is not supported. Some parts of the directory are currently invalid.
8418 The replication operation failed due to a schema mismatch between the servers involved.
8419 DSA object not found.
8420 Naming context not found.
8421 Naming context not found in cache.
8422 Unable to retrieve child object.
8423 Modification is not allowed due to security reasons.
8424 The operation cannot replace this hidden record.
8425 Invalid level.
8426 An attempt to create a level table failed.
8427 Directory configuration parameters are missing during registration.
8428 An attempt to calculate the address book index failed.
8429 Allocation of level table failed.
8430 The directory service encountered an internal failure.
8431 The directory service encountered an unknown failure.
8432 The root object requires a 'top' category.
8433 This directory server is down and cannot accept ownership of the newly floated single master operations role.
8434 The directory service does not have the required configuration information and cannot determine ownership of the newly floated single host operational role.
8435 The directory service cannot transfer one or more floating single host operations roles to other servers.
8436 The copy operation failed.
8437 An invalid parameter was specified for this copy operation.
8438 The directory service is too busy and cannot complete this replication operation at this time.
8439 The single name specified for this copy operation is invalid.
8440 The naming context specified for this copy operation is invalid.
8441 The single name specified for this copy operation already exists.
8442 The replication system encountered an internal error.
8443 The replication operation encountered a database inconsistency problem.
8444 Unable to connect to the server specified for this replication operation.
8445 The copy operation encountered an object with an invalid example type.
8446 The copy operation cannot allocate memory.
8447 The copy operation encountered a mail system error.
8448 Replication reference information for the target server already exists.
8449 Replication reference information for the target server does not exist.
8450 The naming context cannot be deleted because it is replicated from another server.
8451 The copy operation encountered a database error.
8452 The naming context is to be deleted or is not replicated from the specified server.
8453 Replication access denied.
8454 This version of Directory Services does not support the requested operation.
8455 Cancel replication of remote procedure calls.
8456 The origin server is currently rejecting the copy request.
8457 The target server is currently rejecting the copy request.
8458 The copy operation failed due to an object name conflict.
8459 The replication source has been reinstalled.
8460 The copy operation failed because a required parent object is missing.
8461 The copy operation was preempted.
8462 Replication sync attempt abandoned due to lack of updates.
8463 The copy operation was interrupted because the system is shutting down.
8464 The replication synchronization attempt failed because the target partial property setting is not a child of a source partial property setting.
8465 The replication synchronization attempt failed because the primary replication attempted to synchronize from a partial replication.
8466 The server specified for this replication operation has been contacted, but the server was unable to contact another server required to complete the operation.
8467 During replica installation, a schema mismatch between the source and build used was detected and the replica cannot be installed.
8468 Schema update failed: An attribute with the same connection identifier already exists.
8469 Name Translation: Common processing errors.
8470 Name translation: The name cannot be found or the permissions are insufficient to see the name.
8471 Name Translation: Input names map to multiple output names.
8472 Name translation: Output name found, but corresponding output format not found.
8473 Name Translation: Unable to fully resolve, only domain found.
8474 Name Translation: Pure syntax mapping cannot be performed on the client without being wired.
8475 Modification of a constructor att is not allowed.
8476 The specified OM-Object class is incorrect for a property of the specified syntax.
8477 Replication request suspended; awaiting answer.
8478 The requested operation requires a directory service, but one is not available.
8479 The LDAP display name of a category or attribute contains non-ASCII characters.
8480 The requested find operation only supports basic searches.
8481 Find failed to retrieve attributes from the database.
8482 A schema update operation attempted to add a backlink that does not have a corresponding forward link.
8483 The source and target of a cross-domain move do not agree on the object date. Either the source, or the target does not have the last version of the object.
8484 The source and target of the cross-domain move are inconsistent in the object's current name. Either the source, or the target does not have the last version of the object.
8485 The source and destination of inter-domain moves are the same. The calling program should use local move operations rather than inter-domain move operations.
8486 The source and destination of the interdomain move are inconsistent with the naming context in the forest. The source or target does not have a recent version of the partition container.
8487 The target of the cross-domain move is not authoritative for the target naming context.
8488 The identity of the source object provided by the source and target of cross-domain movement is different. The source or target does not have a recent version of the source object.
8489 Objects moved across domains should have been deleted by the target server. The origin server does not have a recent version of the origin object.
8490 Another operation requiring exclusive access to the PDC FSMO is in progress.
8491 The cross-domain move was unsuccessful, resulting in two versions of the moved object - one in the source domain and one in the target domain. The target object needs to be deleted to restore the system to a consistent state.
8492 This object cannot be moved across domains because cross-domain moves of this category are not allowed, or the object has characteristics such as: a trusted account or a restricted RID that prevents movement.
8493 Once moved, objects with membership cannot be moved across domains, which would violate the account group's membership conditions. Remove the object from the account group membership and try again.
8494 A naming context title must be a direct subtitle of another naming context title, not a subtitle of an internal node.
8495 The name of the proposed naming context cannot be verified because the directory does not have a copy of the naming context above the proposed naming context. Please ensure that the server acting as the domain naming master is configured as a global catalog server and that the server and its replication partners are up to date.
8496 The target domain must be in native mode.
8497 The operation cannot be performed because the server does not have an infrastructure container in the specified domain.
8498 Cross-domain moves of account groups are not allowed.
8499 Cross-domain movement of resource groups is not allowed.
8500 The search flag for the attribute is invalid. The ANR bit is only valid on attributes of Unicode or Teletex strings.
8501 It is not allowed to delete a directory tree starting with an object that has an NC head as a child.
8502 The directory service failed to lock the directory tree for deletion because it is in use.
8503 When deleting a directory tree, the directory service failed to identify the list of objects to delete.
8505 Only administrators can modify the member list of an administrative group.
8506 The primary group ID of a domain controller account cannot be changed.
8507 Attempt to modify infrastructure.
8508 The following operations are not allowed: adding a new mandatory attribute to an existing category; removing a mandatory attribute from an existing category; adding an optional attribute to the special category "Top" which has no backlink attribute pointing to either directly or through inheritance. For example: Add or remove subsidiary categories.
8509 Schema updates are not allowed on this domain controller. The registry key is not set, or the DC is not the schema FSMO role owner.
8510 An object of this category cannot be created under the schema container. Under the schema container, you can only create attribute schema and category schema objects.
8511 Replica/child installation failed to obtain the objectVersion property of the schema container on the source DC. The property on the schema container does not exist, or the credentials provided do not have permission to read the property.
8512 The replica/subkey installation failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.
8513 The specified group type is invalid.
8514 Global groups cannot be nested in mixed domains if the domain is security enabled.
8515 Local groups cannot be nested in a mixed domain if the domain is security enabled.
8516 A global group cannot have a local group as a member.
8517 Global groups cannot have universal groups as members.
8518 Universal groups cannot have local groups as members.
8519 Global groups cannot have cross-domain members.
8520 A local group cannot have another cross-domain local group as a member.
8521 A group containing primary members cannot be changed to a safely deactivated group.
8522 Schema buffer load failed to convert string default value SD on schema-like object.
8523 Only DSAs configured as global catalog servers can assume the role of domain naming master FSMO.
8524 DSA operation failed due to DNS lookup failure.
8525 When handling changes to an object's DNS hostname, the service principal name value cannot be kept in sync.
8526 Failed to read security descriptor attribute.
8527 The requested object was not found, but an object with that key was found.
8528 The link attribute being added has incorrect syntax. Forward links can only have syntax 2.5.5.1, 2.5.5.7 and 2.5.5.14, and reverse links can only have syntax 2.5.5.1
8529 The security account administrator needs to obtain the startup password.
8530 The security account administrator needs to obtain the startup key from the floppy disk.
8531 Directory service cannot be started.
8532 Failed to start directory service.
8533 The connection between client and server requires packet confidentiality.
8534 The source domain and the target domain are not in the same forest.
8535 The target domain must be in the forest.
8536 This operation requires that target domain auditing be enabled.
8537 The operation was unable to find a DC for the source domain.
8538 The source object must be a group or user.
8539 The SID of the source object is already in the target forest.
8540 The source object and target object must be of the same type.
8542 Schema information cannot be included in the copy request.
8543 The copy operation cannot be completed due to schema incompatibility.
8544 The copy operation cannot be completed due to an incompatibility with the previous schema.
8545 Replication updates cannot be applied because neither the source nor the target has received information about the recent cross-domain start operation.
8546 The requested domain cannot be deleted because there is still a domain controller that hosts this domain.
8547 The requested operation can only be performed on the global catalog server.
8548 Local groups can only be members of other local groups in the same domain.
8549 External security principal members cannot be members of universal groups.
8550 For security reasons, properties cannot be copied to the GC.
8551 A checkpoint of the PDC cannot be taken because there are too many modifications currently being processed.
8552 The operation requires auditing to be enabled for that source domain.
8553 Security primary objects can only be created in the domain naming context menu.
8554 The service principal name (SPN) cannot be built because the provided hostname is not in a suitable format.
8555 Filter has passed built properties.
8556 The unicodePwd attribute value must be enclosed in double quotes.
8557 Your computer cannot join the domain. The maximum number of computer accounts allowed to be created on this domain has been exceeded. Please contact the system administrator to reset or increase this limit.
8558 For security reasons, the operation must be run on the target DC.
8559 For security reasons, the source DC must be Service Pack 4 or newer.
8560 The "Key Directory Service System" object cannot be deleted during a tree directory deletion operation. The directory deletion operation may only be partially completed.
9001 The DNS server cannot interpret the format.
9002 DNS server failed.
9003 DNS name does not exist.
9004 The name server does not support DNS requests.
9005 Denied DNS operation.
9006 A DNS name still exists that should not exist.
9007 A DNS RR set that should not exist still exists.
9008 The DNS RR set that should exist does not exist.
9009 The DNS server is not authoritative for the zone.
9010 DNS name in update or prereq is not in zone.
9016 DNS signature verification failed.
9017 DNS incorrect key.
9018 DNS signature verification expired.
9501 No record found for DNS query.
9502 Invalid DNS packet.
9503 No DNS package.
9504 DNS error, please check rcode.
9505 DNS package for insurance.
9551 Invalid DNS kind.
9552 Invalid IP address.
9553 Invalid attribute.
9554 Try the DNS operation again later.
9555 The record name and type given are not unique.
9556 DNS name does not comply with RFC description.
9557 DNS name is a fully qualified DNS name.
9558 DNS names are separated by "." (multiple labels).
9559 DNS names are single-part names.
9560 DNS name contains invalid characters.
9561 DNS names are entirely numeric.
9601 DNS zone does not exist.
9602 Invalid DNS zone information.
9603 Invalid DNS zone operation.
9604 Invalid DNS zone configuration.
9605 DNS zone does not have a Start of Authority record (SOA).
9606 There is no "name server" (NS) record for the DNS zone.
9607 DNS zone locked.
9608 DNS zone creation failed.
9609 DNS zone already exists.
9610 DNS automatic zone already exists.
9611 Invalid DNS zone kind.
9612 Secondary DNS zone requires primary IP address.
9613 DNS zones are not secondary.
9614 A secondary IP address is required
9615 WINS initialization failed.
9616 Requires WINS server.
9617 NBTSTAT initialization call failed.
9618 Invalid Start of Authority (SOA) deletion
9651 Primary DNS zone requires data files.
9652 Invalid data file name for DNS zone.
9653 Failed to open data file for DNS zone.
9654 Failed to write data file for DNS zone.
9655 Failed while reading data file for DNS zone.
9701 DNS record does not exist.
9702 DNS record format is incorrect.
9703 Node creation failed in DNS.
9704 Unknown DNS record type.
9705 DNS record timed out.
9706 Name is not in DNS zone.
9707 CNAME loop detected.
9708 The node is a CNAME DNS record.
9709 A CNAME record with the specified name already exists.
9710 The record is not in the DNS zone root.
9711 DNS record already exists.
9712 Secondary DNS zone data error.
9713 Unable to create DNS cache data.
9714 DNS name does not exist.
9715 Cannot create pointer (PTR) record.
9716 DNS domain was not deleted.
9717 The directory service is invalid.
9718 The DNS zone already exists in the directory service.
9719 The DNS server did not create or read the startup file for the directory service collection DNS zone.
9751 Complete DNS AXFR (zone replication).
9752 DNS zone replication failed.
9753 Added local WINS server.
9801 A security update call is required to proceed with the update request.
9851 TCP/IP No network protocol is installed.
9852 No DNS server is configured for the local system.
10004 A blocking operation was interrupted by a call to WSACancelBlockingCall.
10009 The file handle provided is invalid.
10013 An attempt was made to access the socket in a manner not permitted by access permissions.
10014 The system detected an invalid pointer address when trying to use a pointer argument in a call.
10022 An invalid argument was supplied.
10024 Too many sockets open.
10035 A non-blocking socket operation cannot be completed immediately.
10036 A blocking operation is currently being performed.
10037 An operation that was already in progress was attempted on a non-blocking socket.
10038 An operation was attempted on a non-socket.
10039 The requested address was ignored from the operation on a socket.
10040 A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the user's buffer for receiving datagrams was smaller than the datagram.
10041 A protocol specified in a socket function call does not support the syntax of the requested socket class.
10042 An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
10043 The requested protocol has not been configured in the system, or there is no indication of its existence.
10044 There is no support for the specified slot type in this address family.
10045 The referenced object type does not support the attempted operation.
10046 The protocol family has not been configured into the system or there is no indication of its existence.
10047 An address incompatible with the requested protocol was used.
10048 Typically each socket address (protocol/network address/port) is only allowed to be used once.
10049 The requested address is invalid in its context.
10050 The socket operation encountered a dead network.
10051 A socket operation was attempted to an unreachable network.
10052 While the operation was in progress, the connection was interrupted because the keep-alive operation detected a failure.
10053 The software in your host abandoned an established connection.
10054 The remote host forcibly closed an existing connection.
10055 The operation on the socket cannot be performed due to insufficient system buffer space or the queue is full.
10056 A connection request was made on an already connected socket.
10057 The request to send or receive data was not accepted because the socket was not connected and (when using a sendto call to send a datagram socket) no address was supplied.
10058 The socket has been closed in that direction due to a previous close call, and the request to send or receive data was not accepted.
10059 Too many references to a kernel object.
10060 The connection attempt failed because the connecting party did not reply properly after a period of time or the connected host was unresponsive.
10061 No connection can be made because the target machine actively refused it.
10062 Unable to translate name.
10063 The name component or name is too long.
10064 The socket operation failed because the target host is down.
10065 Socket operation attempted with an unreachable host.
10066 A directory cannot be deleted unless it is empty.
10067 A Windows Sockets operation may have a limit on the number of applications that can be used simultaneously.
10068 Limit exceeded.
10069 Disk quota exceeded.
10070 The file handle reference is no longer valid.
10071 Project is not available locally.
10091 WSAStartup does not currently work properly because the system it uses to provide network services is currently unavailable.
10092 The requested Windows Sockets version is not supported
10093 The application did not call WSAStartup, or WSAStartup failed.
10101 Returned by WSARecv or WSARecvFrom indicates that the remote side has begun the shutdown step.
10102 WSALookupServiceNext cannot return more results.
10103 While processing this call, start calling WSALookupServiceEnd. The call is deleted.
10104 Invalid procedure call.
10105 The requested service provider is invalid.
10106 The requested service provider was not loaded or initialized.
10107 A system call failed that should never have failed.
10108 There is no known service for this service. The service cannot be found in the specified namespace.
10109 The specified category cannot be found.
10110 WSALookupServiceNext cannot return more results.
10111 While processing this call, start calling WSALookupServiceEnd. The call is deleted.
10112 Data query failed due to rejection

The above is the detailed content of Detailed explanation of all sql server error numbers - Guo Guo Chong. For more information, please follow other related articles on the PHP Chinese website!