Home  >  Article  >  WeChat Applet  >  WeChat applet Nginx environment configuration

WeChat applet Nginx environment configuration

高洛峰
高洛峰Original
2017-02-25 09:47:201828browse

Detailed explanation of WeChat Mini Program Server environment configuration

Main content:

1. SSL free certificate application steps
2. Nginx HTTPS configuration
3. TLS 1.2 upgrade process

WeChat applet requires using https to send requests, then the web server must be configured to support https, which needs to be done first Applying for an SSL certificate

applet also requires that the version of TLS (Transport Layer Security Protocol) is at least 1.2. After configuring https, If the version of TLS is lower, it involves upgrade issues

So the main steps for server-side environment configuration:

  1. Apply for SSL certificate

  2. Configure the web server to support https (I am using nginx)

  3. Upgrade to TLS 1.2

SSL Certificate Application

https You need to use an SSL certificate. The price of this certificate is between three and five thousand to more than ten thousand per year. For small teams or those who want to get familiar with small For users of the program, the price is still relatively high. In this case, you can choose a free certificate. In addition, you can also consider cloud services, such as Wild Dog, LeanCloud these mature ones Service platforms all support https. If these platforms can meet your business needs, you will save a lot of trouble

Free Certificate: Symantec Free DV SSL on Alibaba Cloud

Application process

wanwang.aliyun.com

Log in to the console, click Security-> Certificate Service in the left menu, There is a Purchase Certificate button in the upper right corner of this page. Click to enter the purchase page, select Free DV SSL, and purchase the

微信小程序 Nginx环境配置

## order The amount is

0 yuan. Just go through the purchase process. After completion, return to the Certificate Service page. You can see a certificate

## in the list. 微信小程序 Nginx环境配置#First perform the "

Complete

" operation, fill in your domain name and basic information and then "

Complete

" the connection will change to " Progress ", click and follow the prompts, mainly to verify your own server. I chose file verification, download a file and upload it to my server, wait for verification After the verification is OK, it will take about 10 minutes You can download the SSL certificate from left to right

Nginx HTTPS configuration

Upload the certificate to the nginx directory, for example

/usr/local/nginx/cert

Modify

conf/nginx.conf

Configure HTTPS server block and add SSL configuration

# HTTPS server
#
server {
 listen  443 ssl;
 server_name localhost;
 ......
 
 ssl on;
 ssl_certificate /usr/local/nginx/cert/213994146300992.pem;
 ssl_certificate_key /usr/local/nginx/cert/213994146300992.key;
 ssl_session_timeout 5m;
 ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE:ECDH:AES:HIGH:!NULL:!aNULL:!MD5:!ADH:!RC4;
 ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
 ssl_prefer_server_ciphers on;


 location / {
  root html;
  index index.html index.htm;
 }

 ......
 
}


Reload the configuration file and use

https

to access your domain name in the browser to see if you can access it normally

Upgrade to TLS 1.2

View TLS version

After accessing the https url, there will be a small green lock icon in front of the address bar. Click it to view the TLS version information

微信小程序 Nginx环境配置If it does not reach

1.2

, you need to upgradeThe operating environment below is centos linux

1) Check the openssl version

https://www.openssl.org/source/

1.0.2

The following versions need to be upgraded. The previous versions have officially stopped maintenance2) Upgrade openssl

Go to the official website to download the new version

https://www.openssl.org/source/

For example, download to

/usr/local

Upgrade

cd /usr/local
tar zxvf openssl-1.0.2j.tar.gz 
cd openssl-1.0.2j 
./config --prefix=/usr/local/openssl 
make && make install 
mv /usr/bin/openssl \
 /usr/bin/openssl.OFF 
mv /usr/include/openssl \
 /usr/include/openssl.OFF 
ln -s \
 /usr/local/openssl/bin/openssl \
 /usr/bin/openssl 
ln -s \
 /usr/local/openssl/include/openssl \
 /usr/include/openssl 
echo "/usr/local/openssl/lib"\
 >>/etc/ld.so.conf 
ldconfig -v


Verification

openssl version -a

3) Recompile nginx

After upgrading

OpenSSL

, nginx needs to be recompiled, otherwise TLS will still be the old versionThe following is the basic installation. If you need more, please adjust it yourself

Software used

    openssl
  • Has been installed previously
  • pcre
pcre installation:

下载地址
http://www.pcre.org/
例如下载到 /usr/local

cd /usr/local
tar -zxv -f pcre-8.39.tar.gz
cd pcre-8.39
./configure --prefix=/usr/local/pcre/
make && make install

zlib installation

下载地址 
http://www.zlib.net/
例如下载到 /usr/local

cd /usr/local
tar -zxv -f zlib-1.2.10.tar.gz
cd zlib-1.2.10
./configure --prefix=/usr/local/zlib/
make && make install

Compile nginx:

tar zxvf nginx-1.10.3.tar.gz
cd nginx-1.10.3
 
./configure --prefix=/data/nginx --with-http_ssl_module --with-openssl=/usr/local/openssl

tar -zxvf nginx-1.10.2.tar.gz
cd nginx-1.10.2

./configure \
--user=用户 \
--group=组 \
--prefix=/usr/local/nginx \
--with-http_ssl_module \
--with-openssl=/usr/local/openssl-1.0.2j \
--with-pcre=/usr/local/pcre-8.39 \
--with-zlib=/usr/local/zlib-1.2.10 \
--with-http_stub_status_module \
--with-threads

make && make install


After the compilation is completed, remember to modify the configuration file and add SSL related information

Then start nginx and visit https url to verify the TSL version again

Problems encountered when compiling and installing Nginx:

The error message is as follows:

/bin/sh: line 2: ./config: No such file or directory
make[1]: *** [/usr/local/ssl/.openssl/include/openssl/ssl.h] Error 127
make[1]: Leaving directory `/usr/local/src/nginx-1.10.2‘
make: *** [build] Error 2

需要说明的是,我这里编译所使用的Nginx源码是1.10.2的。根据报错信息我们知道,出错是因为Nginx在编译时并不能在/usr/local/ssl/.openssl/ 这个目录找到对应的文件,其实我们打开/usr/local/ssl/这个目录可以发现这个目录下是没有.openssl目录的,因此我们修改Nginx编译时对openssl的路径选择就可以解决这个问题了

解决方案:

打开nginx源文件下的/root/nginx-1.10.2/auto/lib/openssl/conf文件

找到这么一段代码:

CORE_INCS="$CORE_INCS $OPENSSL/.openssl/include"
CORE_DEPS="$CORE_DEPS $OPENSSL/.openssl/include/openssl/ssl.h"
CORE_LIBS="$CORE_LIBS $OPENSSL/.openssl/lib/libssl.a"
CORE_LIBS="$CORE_LIBS $OPENSSL/.openssl/lib/libcrypto.a"
CORE_LIBS="$CORE_LIBS $NGX_LIBDL"

修改成以下代码:

CORE_INCS="$CORE_INCS $OPENSSL/.openssl/include"
CORE_DEPS="$CORE_DEPS $OPENSSL/include/openssl/ssl.h"
CORE_LIBS="$CORE_LIBS $OPENSSL/lib/libssl.a"
CORE_LIBS="$CORE_LIBS $OPENSSL/lib/libcrypto.a"
CORE_LIBS="$CORE_LIBS $NGX_LIBDL"

然后再进行Nginx的编译安装即可 

感谢阅读,希望能帮助到大家,谢谢大家对本站的支持!

更多微信小程序 Nginx环境配置相关文章请关注PHP中文网!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn