PHOTOSHOP shortcut keys

Cancel the current command: Esc

Tool palette: Enter

Palette adjustment: Shift+Tab

Open file: Ctrl+O

Close File: Ctrl＋W

Save file: Ctrl＋S

Print file: Ctrl＋P

Exit the system: Ctrl＋Q

Get help: F1

Cut Cut selection area: F2

Copy selection area: F3

Paste selection area: F4

Show or close the brush palette: F5

Show or close Color palette: F6

Show or close the layer palette: F7

Show or close the information palette: F8

Show or close the action palette: F9

Show or close the palette, status bar and toolbox: Tab

Select all: Ctrl+A

Invert selection: Shift+Ctrl+I

Deselect area: Ctrl+D

Move the selection area: arrow keys

Convert the layer to a selection area: Ctrl+click the working layer

Move the selection area in units of 10 pixels:Shift+arrow keys

Copy the selected area: Alt＋arrow keys

Revert to the previous step: Ctrl＋Z

Cut the selected area: Ctrl＋X

Copy the selected area: Ctrl＋C

Paste selected area: Ctrl＋V

Fill as foreground color: Alt＋Delete

Fill as background color: Ctrl＋Delete

Adjust color level tool: Ctrl＋L

Adjust Color balance: Ctrl＋B

Adjust hue/saturation: Ctrl＋U

Free transformation: Ctrl＋T

Increase pen size: "Bracket"

Decrease Pen size: "Bracket"

Select the largest pen tip: Shift+"Bracket"

Select the smallest pen tip: Shift+"Bracket"

Reuse filter: Ctrl+F

Move to the previous layer: Ctrl＋"Bracket"

Go to the next layer: Ctrl＋"Bracket"

Move to the front layer:Shift＋Ctrl＋"Bracket" "

Move to the bottom layer: Shift+Ctrl+"Bracket"

Activate the previous layer: Alt+"Bracket"

Activate the next layer: Alt+" Square brackets"

Merge visible layers: Shift+Ctrl+E

Enlarge the window: Ctrl+"+"

Reduce the window: Ctrl+"-"

Enlarge part of the window: Ctrl+Spacebar+Mouse Click

Zoom out part: Alt+Spacebar+Mouse Click

Scroll to view: PageUp/PageDown

Show or hide the ruler: Ctrl+R

Show or hide the dashed line: Ctrl＋H

Show or hide the grid: Ctrl＋“

Rectangular and elliptical marquee tool [M]

Crop tool [C]

Move Tool【V】

Lasso, Polygonal Lasso, Magnetic Lasso【L】

Magic Wand Tool【W】

Airbrush Tool 【J】

Brush Tool【B】

Like skin stamp, pattern stamp【S】

History Brush Tool【Y】

Like skin Eraser Tool [E]

Pencil, Line Tool [N]

Blur, Sharpen, Smudge Tool [R]

Dodge, Burn, Sponge Tool [O 】

Pen, Free Pen, Magnetic Pen【P】

Add Anchor Point Tool【+】

Delete Anchor Point Tool【-】

Direct Select tool [A]

Text, text mask, vertical text, vertical text mask[T]

Measurement tool[U]

Linear gradient, diameter Directional gradient, symmetrical gradient, angle gradient, diamond gradient【G】

Paint Bucket Tool【K】

Eye Straw, Color Sampler【I】

Grab Tool【 H】

Zoom tool【Z】

Default foreground and background colors【D】

Switch foreground and background colors【X】

Switch Standard mode and quick mask mode [Q]

Standard screen mode, full screen mode with menu bar, full screen mode [F]

Temporarily use the mobile tool [Ctrl]

Temporarily use the color absorbing tool [Alt]

Temporarily use the gripper tool [Space]

Open the tool options panel [Enter]

Quickly enter tool options (current tool There is at least one adjustable number in the options panel) [0] to [9]

Cycle through brush selection [[] or []]

Select the first brush [Shift] + [[ 】

Select the last brush [Shift]+[]]

Create a new gradient (in the "Gradient Editor") [Ctrl]+[N]

File Operation

Create a new graphic file [Ctrl]+[N]

Create a new file with default settings [Ctrl]+[Alt]+[N]

Open an existing one Image [Ctrl] + [O]

Open as... [Ctrl] + [Alt] + [O]

Close the current image [Ctrl] + [W]

Save the current image [Ctrl]+[S]

Save as... [Ctrl]+[Shift]+[S]

Save a copy [Ctrl]+[Alt]+ 【S】

Page Settings【Ctrl】+【Shift】+【P】

Print【Ctrl】+【P】

Open the "Presets" dialog box【 Ctrl]+[K]

Display the last displayed "Preferences" dialog box [Alt]+[Ctrl]+[K]

Set the "General" options (in the Presets dialog box) [Ctrl]+[1]

Set "Storage File" (in the Preferences dialog box) [Ctrl]+[2]

Set "Display and Cursor" (in the Preferences dialog box) In the preset dialog box) [Ctrl]+[3]

Set "Transparent Area and Color Gamut" (in the preset dialog box) [Ctrl]+[4]

Set " Units and Rulers" (in the Presets dialog box) [Ctrl]+[5]

Set "Reference Lines and Grid" (in the Presets dialog box) [Ctrl]+[6]

Set "Plug-ins and Scratch Disks" (in the Preferences dialog box) [Ctrl]+[7]

Set "Memory and Image Cache" (in the Preferences dialog box) [ Ctrl】+【8】

Edit operation

Restore/redo the previous operation【Ctrl】+【Z】

Restore more than two steps of operation【Ctrl】+【 Alt】+【Z】

Redo more than two steps of operation【Ctrl】+【Shift】+【Z】

Cut the selected image or path【Ctrl】+【X】or 【F2】

Copy the selected image or path【Ctrl】+【C】

Merge copy【Ctrl】+【Shift】+【C】

Clipboard Paste the contents of the clipboard into the current graphic [Ctrl] + [V] or [F4]

Paste the contents of the clipboard into the selection box [Ctrl] + [Shift] + [V]

Free transformation [Ctrl] + [T]

Apply free transformation (in free transformation mode) [Enter]

Start transformation from the center or symmetry point (in free transformation mode) [ Alt]

Restrict (in free transform mode) [Shift]

Distort (in free transform mode) [Ctrl]

Cancel transformation (in free transform mode) ) [Esc]

Freely transform the copied pixel data [Ctrl]+[Shift]+[T]

Transform the copied pixel data again and create a copy [Ctrl]+[ Shift】+【Alt】+【T】

Delete the pattern in the selection box or the selected path【DEL】

Fill the selected area or the entire layer with the background color【Ctrl】+ [BackSpace] or [Ctrl] + [Del]

Fill the selected area or the entire layer with the foreground color [Alt] + [BackSpace] or [Alt] + [Del]

Pop up "Fill" dialog box [Shift]+[BackSpace]

Fill from history [Alt]+[Ctrl]+[Backspace]

Image adjustment

Adjust color Level [Ctrl] + [L]

Automatically adjust the color level [Ctrl] + [Shift] + [L]

Open the curve adjustment dialog box [Ctrl] + [M]

Add new points on the curve of the selected channel (in the 'Curve' dialog box) [Ctrl] to add points in the image

Add new points on all curves except compound curves ( In the 'Curve' dialog box) [Ctrl]+[Shift]

Add points and press

to move the selected point (in the 'Curve' dialog box) [↑]/[↓]/[← 】/【→】

Move the selected point in 10-point increments (in the 'Curve' dialog box) [Shift]+[Arrow]

Select multiple controls point (in the 'Curve' dialog box) [Shift] Add point and press

to move the control point forward (in the 'Curve' dialog box) [Ctrl]+[Tab]

to move the control point backward ( In the 'Curve' dialog box) [Ctrl]+[Shift]+[Tab]

Add new points (in the 'Curve' dialog box) Click on the grid

Delete points (' In the 'Curve' dialog box) [Ctrl] Add point

Deselect all points on the selected channel (in the 'Curve' dialog box) [Ctrl]+[D]

Make a curve Make the grid finer or rougher (in the 'Curves' dialog box) [Alt] Add click on the grid

Select the color channel (in the 'Curves' dialog box) [Ctrl]+[~]

Select the monochrome channel (in the 'Curves' dialog box) [Ctrl]+[Number]

Open the "Color Balance" dialog box [Ctrl]+[B]

Open the "Hue" /Saturation" dialog box [Ctrl]+[U]

Adjust the entire image (in the Hue/Saturation" dialog box) [Ctrl]+[~]

Adjust only red ( In the Hue/Saturation dialog box) [Ctrl]+[1]

Adjust only yellow (in the Hue/Saturation dialog box) [Ctrl]+[2]

Adjust only green (in the Hue/Saturation dialog box) [Ctrl]+[3]

Adjust only cyan (in the Hue/Saturation dialog box) [Ctrl]+[4]

Adjust blue only (in the Hue/Saturation dialog box) [Ctrl]+[5]

Adjust only magenta (in the Hue/Saturation dialog box) [Ctrl]+ 【6】

Decolor【Ctrl】+【Shift】+【U】

Invert【Ctrl】+【I】

Layer operation

Create a new layer from the dialog box [Ctrl]+[Shift]+[N]

Create a new layer with default options [Ctrl]+[Alt]+[Shift]+[N]

Create a layer by copying [Ctrl] + [J]

Create a layer by cutting [Ctrl] + [Shift] + [J]

and Group the previous layer [Ctrl] + [G]

Ungroup [Ctrl] + [Shift] + [G]

Merge downward or merge joined layers [Ctrl] + [ E】

Merge visible layers【Ctrl】+【Shift】+【E】

Stamp or stamp connected layers【Ctrl】+【Alt】+【E】

Stamp visible layer [Ctrl] + [Alt] + [Shift] + [E]

Move the current layer down one layer [Ctrl] + [[]

Move the current layer up one layer [Ctrl]+[]]

Move the current layer to the bottom[Ctrl]+[Shift]+[[]

Move the current layer to the bottom Above [Ctrl]+[Shift]+[]]

Activate the next layer [Alt]+[[]

Activate the previous layer [Alt]+[]]

Activate the bottom layer [Shift]+[Alt]+[[]

Activate the top layer [Shift]+[Alt]+[]]

Adjust the current layer Transparency (the current tool has no numeric parameters, such as the move tool) [0] to [9]

Retain the transparent area of ​​the current layer (switch) [/]

Projection effect ( In the "Effect" dialog box) [Ctrl] + [1]

Inner shadow effect (in the "Effect" dialog box) [Ctrl] + [2]

Outer glow effect (in the "Effect" dialog box) [Ctrl]+[3]

Inner glow effect (in the "Effect" dialog box) [Ctrl]+[4]

Bevel and embossing effect (in the "Effect" dialog box) [Ctrl]+[5]

Apply the currently selected effect and make the parameters adjustable (in the "Effect" dialog box) [A 】

Layer blending mode

Cycle selection blending mode [Alt]+[-] or [+]

Normal [Ctrl]+[Alt]+[N]

Threshold (Bitmap mode) [Ctrl] + [Alt] + [L]

Dissolve [Ctrl] + [Alt] + [I]

Behind [Ctrl] 】+【Alt】+【Q】

Clear【Ctrl】+【Alt】+【R】

Multiply【Ctrl】+【Alt】+【M】

Screen[Ctrl]+[Alt]+[S]

Overlay[Ctrl]+[Alt]+[O]

Soft light[Ctrl]+[Alt]+[ F】

Hard Light【Ctrl】+【Alt】+【H】

Color Dodge【Ctrl】+【Alt】+【D】

Color Darken【 Ctrl] + [Alt] + [B]

Darken [Ctrl] + [Alt] + [K]

Brighten [Ctrl] + [Alt] + [G]

Difference【Ctrl】+【Alt】+【E】

Exclude【Ctrl】+【Alt】+【X】

Hue【Ctrl】+【Alt】+ 【U】

Saturation【Ctrl】+【Alt】+【T】

Color【Ctrl】+【Alt】+【C】

Luminosity【Ctrl】 +[Alt]+[Y]

Decolor sponge tool+[Ctrl]+[Alt]+[J]

Add color sponge tool+[Ctrl]+[Alt] +[A]

Dark tone dodge/burn tool+[Ctrl]+[Alt]+[W]

Middle tone dodge/burn tool+[Ctrl]+[Alt] +[V]

Highlight Dodge/Burn Tool+[Ctrl]+[Alt]+[Z]

Select Function

Select All【Ctrl】+[A 】

Deselect【Ctrl】+【D】

Reselect【Ctrl】+【Shift】+【D】

Feather selection【Ctrl】+【Alt】 +【D】

Reverse selection【Ctrl】+【Shift】+【I】

Path change selection numeric keyboard【Enter】

Load selection【Ctrl 】+Click the thumbnail in the layer, path, channel panel

Filter

Click the last filter again according to the last parameters [Ctrl] + [F]

Return the effect of the last filter [Ctrl]+[Shift]+[F]

Repeat the last filter (adjustable parameters) [Ctrl]+[ Alt】+【F】

Selection tool (in the "3D Change" filter) [V]

Cube tool (in the "3D Change" filter) [M]

Sphere Tool (in the "3D Change" filter) [N]

Cylinder Tool (in the "3D Change" filter) [C]

Trackball ( In the "3D Change" filter) [R]

Panoramic camera tool (in the "3D Change" filter) [E]

View operation

Display color Channel [Ctrl] + [~]

Display monochrome channel [Ctrl] + [Number]

Display composite channel [~]

Preview in CMYK mode (switch) [Ctrl]+[Y]

Turn on/off color gamut warning [Ctrl]+[Shift]+[Y]

Enlarge view [Ctrl]+[+]

Zoom out the view [Ctrl] + [-]

Full canvas display [Ctrl] + [0]

Actual pixel display [Ctrl] + [Alt] + [0]

Scroll one screen up【PageUp】

Scroll one screen down【PageDown】

Scroll one screen left【Ctrl】+【PageUp】

Scroll one screen to the right【Ctrl】+【PageDown】

Scroll up 10 units【Shift】+【PageUp】

Scroll down 10 units【Shift】+ 【PageDown】

Scroll 10 units to the left【Shift】+【Ctrl】+【PageUp】

Scroll 10 units to the right【Shift】+【Ctrl】+【PageDown 】

Move the view to the upper left corner [Home]

Move the view to the lower right corner [End]

Show/hide the selection area [Ctrl]+[H]

Show/hide path [Ctrl]+[Shift]+[H]

Show/hide ruler [Ctrl]+[R]

Show/hide guide line[Ctrl] 】+【;】

Show/hide grid【Ctrl】+【”】

Close to the reference line【Ctrl】+【Shift】+【;】

Lock the guides [Ctrl] + [Alt] + [;]

Close to the grid [Ctrl] + [Shift] + [”]

Show/hide the "Brush" panel [F5 】

Show/hide the "Color" panel【F6】

Show/hide the "Layer" panel【F7】

Show/hide the "Information" panel【F8】

Show/hide the "Actions" panel [F9]

Show/hide all command panels [TAB]

Show or hide all palettes except the toolbox [Shift] +【TAB】

Word processing (in the "Text Tool" dialog box)

Left or top alignment【Ctrl】+【Shift】+【L】

Center alignment [Ctrl] + [Shift] + [C]

Right alignment or bottom alignment [Ctrl] + [Shift] + [R]

Select 1 character left/right [Shift 】+【←】/【→】

Down/Up select 1 line【Shift】+【↑】/【↓】

Select all characters【Ctrl】+【A】

Select the characters from the insertion point to the mouse click point [Shift] plus click

Move 1 character left/right [←]/[→]

Move down/up 1 line【↑】/【↓】

Move 1 word left/right【Ctrl】+【←】/【→】

Reduce the text size of the selected text by 2 points Pixel【Ctrl】+【Shift】+【<】

Increase the text size of the selected text by 2 pixels [Ctrl] + [Shift] + [>]

Decrease the text size of the selected text by 10 pixels [Ctrl] +【Alt】+【Shift】+【<】

Increase the text size of the selected text by 10 pixels【Ctrl】+【Alt】+【Shift】+【>】

Reduce the line spacing by 2 pixels [Alt] + [↓]

Increase the line spacing by 2 pixels [Alt] + [↑]

Decrease the baseline displacement Small 2 pixels [Shift] + [Alt] + [↓]

Increase the baseline displacement by 2 pixels [Shift] + [Alt] + [↑]

Increase the kerning Fine-tune or kerning adjustment to decrease 20/1000ems [Alt] + [←]

Increase kerning fine-tuning or kerning adjustment by 20/1000ems [Alt] + [→]

Increase the font size Decrease fine-tuning or kerning adjustment by 100/1000ems [Ctrl]+[Alt]+[←]

Increase fine-tuning or kerning adjustment by 100/1000ems [Ctrl]+[Alt]+[→ 】

Select the white pixels in the channel (including halftone) [Ctrl]+[Alt]+[1~9]

Rectangle and Ellipse Tools [M]

Crop Tool[C]

Move Tool[V]

Lasso, Polygonal Lasso, Magnetic Lasso[L]

Magic Wand Tool[W]

Airbrush Tool[J]

Brush Tool

Leather Stamp, Pattern Stamp[S]

History Brush Tool[Y]

Like eraser tool[E]

Pencil, straight line tool[N]

Blur, sharpen, smear tool[R]

Dodge, burn, sponge tool [O]

Pen, Free Pen, Magnetic Pen [P]

Add Anchor Point Tool[+]

Delete Anchor Point Tool[-]

Direct selection tool [A]

Text, text mask, vertical text, vertical text mask [T]

Measurement tool

Linear gradient, radial Gradient, symmetrical gradient, angle gradient, diamond gradient[G]

Paint bucket tool[K]

Eyedropper, color sampler

Hand tool[H]

Zoom tool[Z]

Default foreground and background colors[D]

Switch foreground and background colors[X]

Switch between standard mode and fast Mask mode[Q]

Standard screen mode, full screen mode with menu bar, full screen mode[F]

Temporary use of mobile tools[Ctrl]

Temporary use Color absorbing tool [Alt]

Temporarily use the gripper tool [space]

Open the tool options panel [Enter]

Quickly enter tool options (at least in the current tool options panel There is an adjustable number) [0] to [9]

Cycle through brush selections<] or [>

Select the first brush [Shift]+<]

Select the last brush [Shift]+[>

Create a new gradient (in the "Gradient Editor") [Ctrl]+[N]

Create a new graphic file [Ctrl ]+[N]

Create a new file with default settings [Ctrl]+[Alt]+[N]

Open an existing image [Ctrl]+[O]

Open as... [Ctrl]+[Alt]+[O]

Close the current image [Ctrl]+[W]

Save the current image [Ctrl]+[S]

Save as... [Ctrl]+[Shift]+[S]

Save copy[Ctrl]+[Alt]+[S]

Page settings[ Ctrl]+[Shift]+[P]

Print [Ctrl]+[P]

Open the "Preferences" dialog box [Ctrl]+[K]

Display the last displayed "Preferences" dialog box [Alt]+[Ctrl]+[K]

Set "General" options (in the Preferences dialog box) [Ctrl]+[1]

Set "Storage File" (in the Preferences dialog box) [Ctrl]+[2]

Set "Display and Cursor" (in the Preferences dialog box) [Ctrl]+[3 ]

Set "Transparent Area and Color Gamut" (in the Preferences dialog box) [Ctrl]+[4]

Set "Units and Rulers" (in the Preferences dialog box) [Ctrl]+[5]

Set "Guidelines and Grid" (in the Preferences dialog box) [Ctrl]+[6]

Set "Plug-ins and Scratch Disk" ” (in the Preferences dialog box) [Ctrl]+[7]

Set “Memory and Image Cache” (in the Preferences dialog box) [Ctrl]+[8]

Restore/redo the previous step* do [Ctrl]+[Z]

Revert more than two steps* do [Ctrl]+[Alt]+[Z]

Redo more than two steps *Make [Ctrl]+[Shift]+[Z]

Cut the selected image or path [Ctrl]+[X] or [F2]

Copy the selected image or path[ Ctrl]+[C]

Merge copy [Ctrl]+[Shift]+[C]

Paste the contents of the clipboard into the current graphic [Ctrl]+[V] or [ F4]

Paste the contents of the clipboard to Clipboard?[Ctrl]+[Shift]+[V]

Free Transform[Ctrl]+[T]

Apply free transform (in free transform mode) [Enter]

Start transform from center or symmetry point (in free transform mode) [Alt]

Limit (in free transform mode) [Shift]

Distort (in free transform mode) [Ctrl]

Cancel distortion (in free transform mode) [Esc]

Free transform copied pixel data [Ctrl]+[ Shift]+[T]

Transform the copied pixel data again and create a copy [Ctrl]+[Shift]+[Alt]+[T]

Delete the mechanical resistance and Fu蜓∪〉Mu Fat?[DEL]

Fill the selected area or the entire layer with the background color [Ctrl]+[BackSpace] or [Ctrl]+[Del]

Before use Fill the selected area or the entire layer with the scenery [Alt]+[BackSpace] or [Alt]+[Del]

Pop up the "Fill" dialog box [Shift]+[BackSpace]

From Fill in the history [Alt]+[Ctrl]+[Backspace]

Adjust the color levels [Ctrl]+[L]

Automatically adjust the color levels [Ctrl]+[Shift]+[ L]

Open the curve adjustment dialog box [Ctrl]+[M]

Add a new point on the curve of the selected channel (in the 'Curve' dialog box) In the image [ Ctrl]Add point

Add new points on all curves except compound curves (in the 'Curve' dialog box) [Ctrl]+[Shift]

Move the selected point ('Curve 'In the dialog box) [↑]/[↓]/[←]/[→]

Move the selected point in increments of 10 points in increments of 10 points (in the 'Curve' dialog box) [Shift ]+[Arrow]

Select multiple control points (in the 'Curve' dialog box) [Shift]Add point button

Move control points forward (in the 'Curve' dialog box) [Ctrl] +[Tab]

Move the control point back (in the 'Curve' dialog box) [Ctrl]+[Shift]+[Tab]

Add a new point (in the 'Curve' dialog box) ) Click on the grid

Delete points (in the 'Curves' dialog box) [Ctrl] Add click points

Deselect all points on the selected channel (in the 'Curves' dialog box) [Ctrl]+[D]

Make the curve grid finer or rougher (in the 'Curves' dialog box) [Alt]Add click grid

Select the color channel ('Curves' dialog box) [Ctrl]+[~]

Select the monochrome channel (in the 'Curves' dialog box) [Ctrl]+[Number]

Open the "Color Balance" dialog box [ Ctrl]+

Open the "Hue/Saturation" dialog box [Ctrl]+

Full image adjustment (in the Hue/Saturation" dialog box) [Ctrl]+[~]

Adjust only red (in the Hue/Saturation dialog box) [Ctrl]+[1]

Adjust only yellow (in the Hue/Saturation dialog box) [Ctrl]+ [2]

Adjust only green (in the Hue/Saturation dialog box) [Ctrl]+[3]

Adjust only cyan (in the Hue/Saturation dialog box) [Ctrl]+[4]

Adjust only blue (in the Hue/Saturation dialog box) [Ctrl]+[5]

Adjust only magenta (in the Hue/Saturation dialog box) ” dialog box) [Ctrl]+[6]

Desaturate [Ctrl]+[Shift]+

Invert [Ctrl]+

New from dialog box A layer [Ctrl]+[Shift]+[N]

Create a new layer with default options [Ctrl]+[Alt]+[Shift]+[N]

Create a layer by copying [Ctrl]+[J]

Create a layer by cutting [Ctrl]+[Shift]+[J]

Group with the previous layer [ Ctrl]+[G]

Ungroup [Ctrl]+[Shift]+[G]

Merge downward or merge joined layers [Ctrl]+[E]

Merge visible layers [Ctrl]+[Shift]+[E]

Stamp or stamp connected layers [Ctrl]+[Alt]+[E]

Convert the current Move the layer down one layer [Ctrl]+<]

Move the current layer up one layer [Ctrl]+[>

Move the current layer to the bottom [Ctrl]+[ Shift]+<]

Move the current layer to the top[Ctrl]+[Shift]+[>

Activate the next layer[Alt]+<]

Activate the previous layer [Alt]+[>

Activate the bottom layer [Shift]+[Alt]+<]

Activate the top layer [Shift] +[Alt]+[>

Adjust the transparency of the current layer (the current tool has no numerical parameters, such as the move tool) [0] to [9]

Keep the current layer Transparent area (switch) [/]

Drop shadow effect (in the "Effect" dialog box) [Ctrl]+[1]

Inner shadow effect (in the "Effect" dialog box) ) [Ctrl]+[2]

Outer glow effect (in the "Effect" dialog box) [Ctrl]+[3]

Inner glow effect (in the "Effect" dialog box) ) [Ctrl]+[4]

Bevel and Emboss effect (in the Effects dialog box) [Ctrl]+[5]

Apply the currently selected effect and make the parameters adjustable (In the "Effects" dialog box) [A]

Layer Blending Mode

Cycle through the blending modes [Alt]+[-] or [+]

Normal [Ctrl]+[Alt]+[N]

Threshold (Bitmap mode) [Ctrl]+[Alt]+[L]

Dissolve [Ctrl]+[Alt]+

Behind[Ctrl]+[Alt]+[Q]

Clear[Ctrl]+[Alt]+[R]

Multiply[Ctrl]+[Alt ]+[M]

Screen[Ctrl]+[Alt]+[S]

Overlay[Ctrl]+[Alt]+[O]

Soft Light[Ctrl]+[Alt]+[F]

Hard Light[Ctrl]+[Alt]+[H]

Color Dodge[Ctrl]+[Alt ]+[D]

Make the color darker[Ctrl]+[Alt]+

Make it darker[Ctrl]+[Alt]+[K]

Make it lighter[Ctrl ]+[Alt]+[G]

Difference [Ctrl]+[Alt]+[E]

Exclude [Ctrl]+[Alt]+[X]

Hue[Ctrl]+[Alt]+

Saturation[Ctrl]+[Alt]+[T]

Color[Ctrl]+[Alt]+[C]

Luminosity [Ctrl]+[Alt]+[Y]

Color removal sponge tool+[Ctrl]+[Alt]+[J]

Color addition sponge tool +[Ctrl]+[Alt]+[A]

Dark key dodge/burn tool+[Ctrl]+[Alt]+[W]

Mid-tone dodge/burn tool +[Ctrl]+[Alt]+[V]

Highlight Dodge/Burn Tool+[Ctrl]+[Alt]+[Z]

Select All[Ctrl]+[A ]

Deselect [Ctrl]+[D]

Reselect [Ctrl]+[Shift]+[D]

Feather selection [Ctrl]+[Alt] +[D]

Reverse selection [Ctrl]+[Shift]+

Path change selection numeric keyboard [Enter]

Load selection [Ctrl]+point Press the thumbnail in the layer, path, channel panel

Make the last filter again according to the last parameters [Ctrl]+[F]

Undo what you did last time Effect of filter [Ctrl]+[Shift]+[F]

Repeat the last filter (adjustable parameters) [Ctrl]+[Alt]+[F]

Selection tool (in the "3D Change" filter) [V]

Cube tool (in the "3D Change" filter) [M]

Sphere tool (in the "3D Change" filter ” filter) [N]

Cylinder tool (in the “3D Change” filter) [C]

Trackball (in the “3D Change” filter) [R ]

Panoramic camera tool (in the "3D Change" filter) [E]

Show color channel[Ctrl]+[~]

Show monochrome channel[ Ctrl]+[Number]

Display composite channel [~]

Preview in CMYK mode (switch) [Ctrl]+[Y]

Turn on/off color gamut warning [Ctrl]+[Shift]+[Y]

Enlarge the view [Ctrl]+[+]

Reduce the view [Ctrl]+[-]

Full canvas display [Ctrl]+[0]

Actual pixel display [Ctrl]+[Alt]+[0]

Scroll up one screen [PageUp]

Down Scroll one screen [PageDown]

Scroll one screen left [Ctrl]+[PageUp]

Scroll one screen right [Ctrl]+[PageDown]

Scroll up 10 units [Shift]+[PageUp]

Scroll down 10 units [Shift]+[PageDown]

Scroll 10 units left [Shift] +[Ctrl]+[PageUp]

Scroll 10 units to the right [Shift]+[Ctrl]+[PageDown]

Move the view to the upper left corner [Home]

Move the view to the lower right corner [End]

Show/hide the selection area[Ctrl]+[H]

Show/hide the path[Ctrl]+[Shift]+[H ]

Show/Hide Ruler[Ctrl]+[R]

Show/Hide Guides[Ctrl]+[;]

Show/Hide Grid[Ctrl] +[”]

Snap to the guide line[Ctrl]+[Shift]+[;]

Lock the guide line[Ctrl]+[Alt]+[;]

Snap to the grid [Ctrl]+[Shift]+[”]

Show/hide the “Brush” panel[F5]

Show/hide the “Color” panel[F6]

Show/hide the "Layer" panel[F7]

Show/hide the "Information" panel[F8]

Show/hide the "Action" panel[F9]

Show/hide all command panels [TAB]

Show or hide all palettes except the toolbox [Shift]+[TAB]

Word processing (in the "Text Tools" dialog box)

Left or top aligned [Ctrl]+[Shift]+[L]

Center aligned [Ctrl]+[Shift]+[C]

Right or bottom alignment [Ctrl]+[Shift]+[R]

Left/right selection of 1 character [Shift]+[←]/[→]

Bottom/top selection 1 line [Shift]+[↑]/[↓]

Select all characters [Ctrl]+[A]

Select characters from the insertion point to the mouse click point [Shift] plus dot Press

Move 1 character left/right [←]/[→]

Move 1 line down/up [↑]/[↓]

Move left/right 1 character [Ctrl]+[←]/[→]

Reduce the text size of the selected text by 2 pixels [Ctrl]+[Shift]+[<]

Increase the text size of the selected text by 2 pixels [Ctrl]+[Shift]+[>]

Decrease the text size of the selected text by 10 pixels [Ctrl]+[ Alt]+[Shift]+[<]

Increase the text size of the selected text by 10 pixels [Ctrl]+[Alt]+[Shift]+[>]

Decrease the line spacing by 2 pixels [Alt]+[↓]

Increase the line spacing by 2 pixels [Alt]+[↑]

Reduce the baseline displacement by 2 Point Pixel[Shift]+[Alt]+[↓]

Increase the baseline displacement by 2 pixels [Shift]+[Alt]+[↑]

Decrease the kerning fine-tuning or kerning adjustment by 20/1000ems [Alt]+[←]

Increase the kerning or kerning adjustment by 20/1000ems [Alt]+[→]

Decrease the kerning or kerning adjustment by 100/1000ems [Ctrl]+[Alt]+ [←]

Increase the kerning fine-tuning or kerning adjustment by 100/1000ems [Ctrl]+[Alt]+[→]

The application of shortcut keys in PHOTOSHOP is very extensive. Sometimes it can be very convenient to complete some complex operations, achieving the

effect of getting twice the result with half the effort. I will not go into details about some commonly used shortcut keys here, but will only discuss some alternative shortcut keys that beginners may not have mastered.

　1. ALT

# When drawing the selected range, you can hold down the ALT key and temporarily place it between the "Polygonal Lasso

" tool and the "Lasso" tool. Make the switch.

When using the "Burn Tool" and "Lighten Tool", you can hold down ALT to temporarily switch between them.

When using the "Stamp Tool", you can use the ALT key to temporarily switch to the "Eye Straw Tool". At this time, you can easily select the color, making the

"Stamp Tool" easy to use. The most typical application is to process old scanned photos (please refer to the corresponding article, this article will not do

narrative).

When using the "Brush Tool" or "Airbrush Tool", you can hold down the ALT key to temporarily switch to the "Eye Straw" tool, and select the desired

color at any time.

When using the "Eraser Tool", hold down the ALT key, and the system will erase the history in the opposite state.

When drawing a path, hold down the ALT key and drag the mouse to switch to manual drawing state.

You can use the ALT key and the corresponding letters after the menu to open the menu

2. CTRL

The CRRL key is widely used, such as commonly used copy, CTRL+C paste, CTRL+V cut, CTRL+X, etc. These are recorded behind the menu

in PHOTOSHOP. When it is gray, it means that it is currently unavailable.

When applying filters, CRRL also has the following uses.

Restore filter: CTRL+Z, the last applied filter effect will be removed. If CTRL+Z is pressed again, the filter effect will be newly applied from

.

Apply the filter effect again: CTRL+F, you can apply the recent filter effect again to enhance the filter effect.

Hold down the CTRL key and click the channel containing the selected range you want to load to convert the channel to a selected range.

3. SHIFT

When using "Polygonal Lasso", hold down the SHIFT key and you can only draw the selected range horizontally, vertically and 45 degrees.

During free transformation, hold down the SHIFT key and drag the bevel control point to deform according to the original proportion.

When using the "Eraser Tool", hold down the SHIFT key and you can only erase horizontally and vertically.

When drawing a path, hold down the SHIFT key to limit the angle of the line segment to a multiple of 45 degrees; when selecting a path, you can select multiple paths.

4. Composite key

CTRL+SHIFT+ALT+E: Merge all visible layers into the new layer as new layers.

　CTRL+ALT+F: Display the last applied filter dialog box.

CTRL+SHIFT: Click a channel at the same time to add the original selected range and the channel as the selected range.

CTRL+ALT: Click a channel at the same time, and the range after subtracting the overlapping area from the original selected range and the channel is used as the selected range.

CTRL+ALT+SHIFT: Click a channel at the same time to use the overlapping area of ​​the original selected range and the channel as the selected range.

Secret Technique 1:

◆Double-click the background area=Open file

ctrl+double-click the background area=New file

shift+double-click the background area=Save

alt+Double-click the background area=Open as

ctrl+shift+=Save as

ctrl+alt+o=Real pixel display

ctrl+h=Hide selection Area

ctrl+d=Unselect area

ctrl+w=Close file

ctrl+q=Exit photoshop

▲ f=Standard display Mode→Full-screen display mode with menu→Full-screen display mode

★ Press the Tab key to show or hide the toolbox and palette, and press the "Shift+Tab" key to show or hide other items except the toolbox. Palette

.

★ esc=Cancel operation

★ You can quickly select a tool by pressing a certain letter key on the keyboard. The letter shortcut keys for each tool are as follows: Mar-quee-M,

Lasso-l, Airbrush-a, Eraser-E, Rubber Stamp-S, Focus-R, Path-P, Line-N, Paint Bucket-K,

Hand-H, Move -V, Magic Wand-W, Paintbrush-B, Pencil-Y, Smudge-U, Toning-O, Type-T, Gradient-

G, Eyedropper-I, Zoom-Z, Default Colors-D , Switch Colors-X, Standard Mode-Q, Quick Mask

Mode-Q,

Secret Technique 2: Shift, Ctr, Alt co-star!

When using other tools , hold down the Ctrl key to switch to the function of the Move tool (except when selecting the Hand tool); hold down the space bar to switch to the function of the

Hand tool.

When using other tools, press "Ctrl+Spacebar" to switch to the Zoom In tool to enlarge the image display ratio: Press "Alt+Ctrl+Spacebar"

to switch to the Zoom Out tool to reduce the image. Zoom.

Press the "Ctrl+[+]" key to continuously enlarge the display ratio of the image file, but the window will not be enlarged; press the "Ctrl+[-]" key to continue to reduce the display ratio of the image file

, but the window will not be enlarged accordingly. The window does not shrink accordingly.

Press the "Ctrl+Alt+[+]" key to continuously enlarge the display ratio of the image file, and the window will be enlarged; press the "Ctrl+Alt+[-]" key to make the image

The image file continues to reduce its display ratio, and the window shrinks accordingly.

Double-click the mouse on the Hand tool to display the image matching the size of the window.

Press "Ctrl+Alt+[Number Key 0]" or double-click the mouse on the Zoom tool to display the image file in a 1:1 ratio.

Press the "Shift+Backspace" key to directly call the Fill dialog box.

Press the "Alt+Backspace(delete)" key to fill the foreground color into the selection box, and press the "Ctrl+Backspace(delete)" key to fill the background color into the selection box

On the Layers, Channels, and Paths palettes, when you press Alt and click the tool icon at the bottom of these palettes, the corresponding dialog box can be called up for tools that have dialog boxes. to change settings.

When moving layers and selection boxes, hold down the Shift key to move horizontally, vertically, or at a 45-degree angle. Press the arrow keys on the keyboard to move each lpixel

. Hold down the Shift key and press the arrow keys on the keyboard to move 10 pixels at a time.

When using the selection tool, press the Shift key and drag the mouse to increase the selection range (open set) outside the original selection box; press the Alt key and drag the mouse to

delete the overlap with the original selection box Part of the selection range; press the Shift and Alt keys at the same time and drag the mouse to select a range that overlaps the original selection frame (intersection).

When calling the Curves dialog box, hold down the Alt key and click the mouse inside the grid to add grid lines and improve the accuracy of the curve.

After changing the settings of a certain dialog box, if you want to restore the default values, just hold down the Alt key, the Cancel key will become the Reset key, and

click on the Reset key. .

If you want to copy an image on a certain layer to the center of the image window of a different size, you can hold down the Shift key while dragging the mouse.

Drag the image to the destination The window will be automatically centered.

If you want to use the image for network transmission, you can set the image mode to Indexed Color indexed color mode, which has the advantages of small file size and fast transmission. If you choose GIF89a Export( GIF output), you can set the transparent effect and save the file in GIF format.

When using the free transformation (Layer/Free Transform) function, press the Ctrl key and drag a control point to adjust the deformation at will

; "Shift+Ctrl" key and drag Move a control point to make tilt adjustments; press the Alt key and drag a control point to make symmetrical adjustments

; press the "Shift+Ctrl+Alt" key and drag a control point to make perspective adjustments Effect adjustment.

On the layers palette, when you hold down Ctrl and click a layer with the mouse, the image of the layer can be loaded into a selection box (except the Background layer, which can be renamed

).

On the layers palette, double-click a layer to bring up the Layer style dialog box; hold down the Alt key and double-click to bring up the Layer

Properties dialog box.

Several tips when using the Path tool: Holding down the Shift key when using the Pen tool to create a path can force the path or direction line to be

horizontal, vertical or 45 degrees corner, hold down the Ctrl key to temporarily switch to the path selection tool, hold down the Alt key and single-click the pen-shaped cursor on the black node to change the direction of the direction line so that the curve can turn; press the Alt key to use When using the Direct Selection tool, clicking on a path will select the entire path; to select multiple paths at the same time, hold down Shift and click one by one; when using the Path Selection tool, hold down the "Ctrl+Alt" keys. Moving

closer to the path will switch to the add node and subtract node pen tools.

To switch whether the path is displayed, you can hold down the Shift key and click the mouse on the path bar of the path palette, or click on the gray area of ​​the path color palette

Just click.

If you want to execute several macros (Actions) at the same time, you can first add a macro and then record each macro to be executed.

If you want to add a new command after a certain command in a macro (Action), you can first select the command and then click Start recording on the palette

(Begin recording ) icon, select the command to be added, and then click the Stop recording icon.

When using the Filter/Render/Clouds filter, if you want to produce more obvious branch patterns, you can hold down the Alt key before executing this command;

To generate low For diffuse color effect, you can hold down the Shift key before executing the command.

When using the Filter/Render/Lighting Effects filter, if you want to copy the light source in the dialog box, you can first hold down the Alt key and then drag the

light source to copy.

To switch color modes directly on the Color palette, hold down the Shift key, then move the cursor to the color bar and click.

For more articles related to PHOTOSHOP shortcut keys, please pay attention to the PHP Chinese website!