PHP development environment configuration record_PHP tutorial

[apache installation]

Copy code The code is as follows:

httpd.exe -k install -n "apache2.2.15"
httpd.exe -k start -n "apache2.2.15"

[apache uninstall]

Copy code The code is as follows :

httpd.exe -k stop -n "apache2.2.15"
httpd.exe -k uninstall -n "apache2.2.15"

【httpd .conf configuration key]

Copy code The code is as follows:

ServerRoot "D:/APM/Apache2.2.15"
Listen 80
# Compress content sent to client gzip support
#LoadModule deflate_module modules/mod_deflate.so
# LoadModule cgi_module modules/mod_cgi.so
# fastcgi
LoadModule fcgid_module modules/mod_fcgid .so
LoadModule rewrite_module modules/mod_rewrite.so
DocumentRoot "D:/APM/Apache2.2.15/htdocs"
# Support php scripts
# Fastcgi mode comment this line
# Direct In the virtual host, each site can be configured to use a different version of php or a different cgi
#Include conf/extra/httpd-php.conf
# Fancy directory listings Fancy directory listings
Include conf/extra /httpd-autoindex.conf
# Virtual hosts virtual host
#Include conf/extra/httpd-vhosts.conf
# fastcgi mode virtual host
Include conf/extra/httpd-vhosts-fcgid. conf
# Various default settings footer displays version information AccessFileName .htaccess
Include conf/extra/httpd-default.conf

[httpd-php.conf reference]

Copy the code The code is as follows:

#
# Find /APM/php-5.2.12-Win32 Replace
#
SetEnv PHPRC "/APM/php-5.2.12-Win32"
SetEnv TMP "/tmp"
# UnsetEnv PERL5LIB
# Load dll without adding the php path in PATH
#LoadFile "/APM/php-5.2.12-Win32/libpq.dll"
LoadFile "/APM/php-5.2.12-Win32/libmysql.dll"
LoadFile "/APM/php-5.2.12- Win32/libmcrypt.dll"
LoadFile "/APM/php-5.2.12-Win32/libmhash.dll"
LoadFile "/APM/php-5.2.12-Win32/libeay32.dll"
LoadFile /APM/php-5.2.12-Win32/ssleay32.dll
#
# PHP-Module setup
#
LoadFile "/APM/php-5.2.12-Win32/php5ts.dll"
LoadModule php5_module "/APM/php-5.2.12-Win32/php5apache2_2.dll"
SetHandler application/x-httpd-php
SetHandler application/x-httpd-php-source
# Load php.ini File Dir
PHPIniDir "/APM/php-5.2.12-Win32"
AddType text/html .php .phps

[httpd-vhosts.conf reference]

Copy code The code is as follows:

NameVirtualHost *:80
#Document Directory
DocumentRoot "/vhosts/localhost "
#Name such as www.php.net
ServerName localhost
#Alias ​​such as php.net
ServerAlias ​​127.0.0.1
#Error log file
ErrorLog "logs/dummy-host .localhost-error_log"
#Directory access rules
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
#Directory index file
DirectoryIndex index.html index.htm index.php
[html]
[httpd-vhosts-fcgid.conf reference]
[code]
#FcgidInitialEnv PHPRC "/APM/php5210"
#FcgidInitialEnv PATH " /APM/php5210;C:/WINDOWS/system32;C:/WINDOWS;C:/WINDOWS/System32/Wbem;"
#FcgidInitialEnv SystemRoot "C:/Windows"
#FcgidInitialEnv SystemDrive "C:"
#FcgidInitialEnv TEMP "C:/WINDOWS/Temp"
#FcgidInitialEnv TMP "C:/WINDOWS/Temp"
#FcgidInitialEnv windir "C:/WINDOWS"
FcgidIOTimeout 64
FcgidConnectTimeout 16
FcgidMaxRequestsPerProcess 500
NameVirtualHost *:80
DocumentRoot "/vhosts/localhost"
ServerName localhost
ServerAlias ​​127.0.0.1
ErrorLog "logs/dummy-host.localhost-error_log"
Options Indexes FollowSymLinks ExecCGI
#Options +ExecCGI
AllowOverride All
#AddHandler fcgid-script .php
#FCGIWrapper /APM/php5210/php-cgi.exe .php
#"
AddHandler fcgid-script .php
FcgidWrapper "/APM/php-5.2.13-nts-Win32/php-cgi.exe" .php
#FcgidWrapper "/APM/php-5.3.2-nts -Win32-VC6-x86/php-cgi.exe" .php
#
Order allow,deny
Allow from all
DirectoryIndex index.html index.htm index.php

【Mysql installation】

Copy code The code is as follows:

mysqld-nt.exe --install MySQL5. 0.45-community-nt --defaults-file=D:APMmysql5.0.45my.ini
net start MySQL5.0.45-community-nt

【Mysql uninstall】

Copy code The code is as follows:

net stop MySQL5.0.45-community-nt
mysqld-nt.exe --remove MySQL5.0.45-community-nt

[my.ini reference]

Copy code The code is as follows:

[mysqld]
basedir="D:APMmysql5.0.45"
datadir="D:APMmysql5.0.45Data"
tmpdir="D:APMmysql5 .0.45tmp"
# log="D:APMmysql5.0.45tmpmysql.log"
default-character-set=utf8
port=3306
interactive_timeout=5
wait_timeout=5
skip-locking
skip-innodb
skip-bdb
ft_min_word_len=1
[mysqld]
port=3306
basedir="D:/mysql/"
datadir ="D:/mysql/Data/"
tmpdir="d:/mysql/tmp/"
default-character-set=utf8
default-storage-engine=MYISAM
skip-bdb
skip-innodb
skip-locking
key_buffer=16M
max_allowed_packet=1M
table_cache=128
thread_cache=8
join_buffer_size=512K
sort_buffer=512K
record_buffer=512K
max_connections=500
wait_timeout=120
interactive_timeout=120
max_connect_errors=3000
long_query_time=1
max_heap_table_size=16M
tmp_table_size=8M
thread_concurrency =8
myisam_sort_buffer_size=8M
myisam_sort_buffer_size=4M
low_priority_updates=1
ft_min_word_len=1

[php.ini configuration reference]

Copy code The code is as follows:

output_buffering = On
disable_functions = system,passthru,shell_exec,exec,popen,proc_open
enable_dl = Off

upload_tmp_dir = "D:/tmp/uploadtemp/"
session.save_path = "d:/tmp/sessiondata/"
date.timezone = "Etc/GMT-8" ;表示的是 GMT+8
mbstring.language = Neutral ; Set default language to Neutral(UTF-8) (default)
mbstring.internal_encoding = UTF-8 ; Set internal encoding to UTF-8

cgi.force_redirect = 0
cgi.fix_pathinfo = 1
fastcgi.impersonate = 1

[eaccelerator]
;zend_extension="/APM/ext/eAccelerator_v0_9_6_for_v5_2_13-VC6/eAccelerator.dll"
;zend_extension="/APM/ext/eAccelerator_v1_0_svn412_for_v5_2_13-VC6/eAccelerator.dll"
eaccelerator.shm_size="16"
eaccelerator.cache_dir="/tmp/eaccelerator"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
;eaccelerator.log_file="/var/log/httpd/eaccelerator_log"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

[Zend]
zend_optimizer.optimization_level=15
zend_optimizer.encoder_loader=0
;zend_extension_ts="/APM/ext/ZendOptimizer-3.3.0/lib/Optimizer-3.3.0/php-5.2.x/ZendOptimizer.dll"
;zend_extension="/APM/ext/ZendOptimizer_nts.dll"
;zend_extension="/APM/ext/ZendOptimizerPlus.dll"

; 下面是使用ZendExtensionManager.dll的参考配置
;zend_extension_manager.optimizer_ts="/APM/Zend/ZendOptimizer-3.3.0/lib/Optimizer-3.3.0"
;zend_extension_ts="/APM/Zend/ZendOptimizer-3.3.0/lib/ZendExtensionManager.dll"
;zend_extension_manager.debug_server_ts="/APM/Zend/ZendOptimizer-3.3.0/lib/ZendDebugger-5.2.13-cygwin_nt-i386"
;zend_debugger.expose_remotely=always
;zend_debugger.allow_hosts=127.0.0.1/32
;zend_debugger.allow_tunnel=127.0.0.1/32
[ZendDebugger]
; 放到后边可以和zend_optimizer同时加载
;zend_extension_ts="/APM/ext/ZendDebugger-5.2.15RC1-cygwin_nt-i386/php-5.2.x/ZendDebugger.dll"

[xcache-common]
;zend_extension="D:/APM/ext/XCache-1.3.0-php-5.2.10-nts-Win32-VC6-x86/php_xcache.dll"
; extension = php_xcache.dll

[xcache.admin]
xcache.admin.enable_auth = Off
xcache.admin.user = "mOo"
; xcache.admin.pass = md5($您的密码)
xcache.admin.pass = ""

[xcache]
; 这里的多数选项仅在 ini 里可以修改, 这里列出的都是默认值, 除非另外说明
; select low level shm/allocator scheme implemenation
xcache.shm_scheme = "mmap"
; 禁用: xcache.size=0
; 启用: xcache.size=64M 之类 (任意>0的值) 同时请注意您的系统 mmap 上限
xcache.size = 0
; 建议设置为 cpu 数 (cat /proc/cpuinfo |grep -c processor)
xcache.count = 1
; 只是个参考值, 您可以放心地存储多于此数量的项目(php脚本/变量)
xcache.slots = 8K
; 缓存项目的 ttl, 0=永久
xcache.ttl = 0
; 扫描过期项目的时间间隔, 0=不扫描, 其他值以秒为单位
xcache.gc_interval = 60

; 同上, 只是针对变量缓存设置
xcache.var_size = 1M
xcache.var_count = 1
xcache.var_slots = 8K
; 默认, 允许 ini_set()
xcache.var_ttl = 0
; 最大ttl值
xcache.var_maxttl = 0
xcache.var_gc_interval = 300

; 仅测试用
xcache.test = Off
; /dev/zero 时无效
xcache.readonly_protection = Off
; 对于 *nix 系统, xcache.mmap_path 是文件路径而不是目录, (可以不存在 但是必须能创建).
; 如果您期望启用 ReadonlyProtection, 可以使用类似 "/tmp/xcache"
; 2 个 php 组不会共享同一个 /tmp/xcache
; 对于 Win32 系统, xcache.mmap_path=匿名MAP名字, 不是文件路径. 建议使用 XCache 字眼避免跟其他软件冲突
xcache.mmap_path = "XCache"

; 仅用于 *nix 系统
; 设置为空(禁用) 或者类似 "/tmp/phpcore/"
; 注意该目录应该能被 php 写入文件 (跟 open_basedir 无关)
xcache.coredump_directory = ""

xcache.cacher = On
xcache.stat = On
xcache.optimizer = Off

[xcache.coverager]

; 如果 xcache.coveragedump_directory 设置为空则本设置自动为 Off
xcache.coverager = Off

; 请确保本目录能被 coverage viewer 脚本读取 (注意 open_basedir)
; 依赖于 xcache.coverager=On
xcache.coveragedump_directory = ""

[Xdebug]
xdebug.var_display_max_depth = 10
;xdebug.remote_autostart = 1
;xdebug.remote_enable=1
;xdebug.remote_handler=dbgp
;xdebug.remote_host=127.0.0.1
;xdebug.remote_mode=req
;xdebug.idekey=default
;xdebug.remote_log="/xdebug.log"
;xdebug.remote_port=9000
xdebug.auto_trace=off
;xdebug.collect_params=on
;xdebug.collect_return=on
xdebug.trace_output_dir="/tmp/xdebug"
xdebug.profiler_enable=off
xdebug.profiler_output_dir="/tmp/xdebug"
;zend_extension_ts="/APM/ext/xdebug/php_xdebug-2.0.5 -5.2.dll"
;zend_extension="/APM/ext/xdebug/php_xdebug-2.0.5-5.2-nts.dll"
zend_extension="/APM/ext/xdebug/php_xdebug-2.1.0beta3- 5.2-vc6-nts.dll"

[IIS ISAPI]

Copy code The code is as follows:

Add the environment variable PHPRC=D:PHP. This is to notify iis to read the path of the php.ini file.
Add D:PHP to PATH to read related dynamic link libraries.
Add a new web service extension php d:phpphp5isapi.dll
Add application extension mapping executable file d:phpphp5isapi.dll extension.php
Restart IIS and php will be available.

[IIS FastCGI PHP]

Copy code The code is as follows:

There is no need to add an environment for this variables and modify the PATH variable.
Install FastCGI first, the installer will automatically add
Web Service Extension - FastCGI Handler
c:windowssystem32inetsrvfcgiext.dll
and set it to allow.
Modify c:windowssystem32inetsrvfcgiext.ini
[Types]
php=PHP
[PHP]
ExePath=D:phpphp-cgi.exe
InstanceMaxRequests=10000
EnvironmentVars= PHP_FCGI_MAX_REQUESTS:10000
Add application extension mapping executable file c:windowssystem32inetsrvfcgiext.dll extension.php
Just restart iis.

[ISAPI_Rewrite reference]

Copy code The code is as follows:

RewriteEngine On
RewriteBase /

RewriteCond %{HTTP_HOST} ^03188.net [NC]
RewriteRule ^(.*)$ http://www.03188.net/$1 [L,R=301]

#### RewriteCond %{REQUEST_URI} ^[A-Z]{3,9} /index.php HTTP /
# RewriteRule ^index.(php|htm|html)$ http://www. 03188.net/ [R=301,L]

RewriteRule ^([a-z]+)/(.*)/(.*)/(.*).htm$ index.php?action=$1 &option=$2&extent=$3&info=$4 [L]
RewriteRule ^([a-z]+)/(.*)/(.*).htm$ index.php?action=$1&option=$2&extent=$3&info =$3 [L]
RewriteRule ^([a-z]+)/(.*).htm$ index.php?action=$1&option=$2 [L]
RewriteRule ^([a-z]+).htm $ index.php?action=$1 [L]

# RewriteRule ^(.*).asp$ http://www.03188.net [L,R=301]
# Modify complete mode Make the crawled url valid
# RewriteRule ^index.php/([a-z]+)/(.*)/(.*).htm$ $1/$2/$3.htm [L,R=301 ]
# RewriteRule ^index.php/([a-z]+)/(.*).htm$ $1/$2.htm [L,R=301]

# No appears after modifying the forum move input file specified.
# RewriteRule ^bbs/(.*)$ http://bbs.03188.net/$1 [L,R=301]

# Modify human resources hr
# RewriteRule ^hr/(.*)$ http://hr.03188.net/$1 [L,R=301]

http://www.bkjia.com/PHPjc/322833.htmlwww.bkjia.comtruehttp: //www.bkjia.com/PHPjc/322833.htmlTechArticle[apache installation] Copy the code as follows: httpd.exe -k install -n "apache2.2.15" httpd. exe -k start -n "apache2.2.15" [apache uninstall] Copy the code as follows: httpd.exe -k...