IP Address 192.168.0.100 – Network Router Admin Login - MiniTool

Visit the 192.168.0.100 Router Management Interface Guide

192.168.0.100 is a commonly used private IP address, usually used in home, school, or internal corporate networks. It has high security and privacy and is adopted by many brands of routers and access points, such as Netgear, SerComm and USRobotics.

Due to security reasons, you may need to log in to 192.168.0.100 to change your password or other settings. Before logging in, make sure you are connected to the correct network, which usually also uses the 192.168.xx IP address segment (the specific IP address is usually marked on the back of the router). If you are not sure about your IP address, please refer to the relevant network tools for query.

Login steps:

Step 1: Open a browser (such as Chrome, Safari, Edge, etc.), enter 192.168.0.100 , http://192.168.0.100 or https://192.168.0.100 in the address bar and access it.

Step 2: The browser will jump to the router's login page, and you need to enter your username and password. If you forget your password, you can try the following commonly used default username and password combination:

• Username: admin, password: password
• Username: admin, password: admin
• Username: admin, password: 1234
• Username: admin, password: (empty)
• Username: (empty), password: admin

Step 3: Click the "OK" or "Login" button to enter the router settings interface.

If neither the above username nor password is valid, you need to reset the router. Typically, you can use the nib or paper clip to hold the reset button on the back of the router for 30 seconds, then release and wait for the router to restart.

troubleshooting:

If you cannot log in to 192.168.0.100, try the following steps:

1. Double-check that the IP address entered in the browser is correct.
2. Confirm that you are connected to the correct network and to your router.
3. Try using another browser, or clear your browser cache and cookies.

Hope this guide will help you successfully log in to 192.168.0.100. If you have any questions, please leave a message below.

The above is the detailed content of IP Address 192.168.0.100 – Network Router Admin Login - MiniTool. For more information, please follow other related articles on the PHP Chinese website!