How to interpret the output results of Debian Sniffer

Debian Sniffer is a network sniffer tool for capturing and analyzing network packets

1. Timestamp: Displays the time of packet capture, usually in seconds.

2. Source IP address: The network address of the device that sent the packet.

3. Destination IP address: The network address of the device receiving the data packet.

4. Source Port: The port number used by the device sending the packet.

5. Destination Port: The port number used by the device receiving the packet.

6. Protocol: Network protocols used by data packets, such as TCP, UDP, ICMP, etc.

7. Packet Length: The total length of the packet, including the header and load.

8. Data: The payload of the data packet, that is, the actual data transmitted.

When interpreting the output results of Debian Sniffer, you need to pay attention to the following points:

• Exceptional traffic: Check for large amounts of packets from the same source or target, which may indicate a cyber attack or abnormal behavior.

• Unused ports: Check if there are a large number of packets sent to unused ports, which may indicate scanning behavior or misconfiguration.

• Protocol distribution: Check the number of packets for different protocols to understand which protocols are mainly used in the network.

• Packet size distribution: View the size distribution of data packets to understand the types and sizes of data transmitted in the network.

• Duplicate packets: Check for duplicate packets, which may indicate network problems or attack behavior.

By analyzing this information, we can understand the normal behavior and potential problems of the network, and thus take corresponding measures to optimize and protect the network.

The above is the detailed content of How to interpret the output results of Debian Sniffer. For more information, please follow other related articles on the PHP Chinese website!