Fix 'Windows Cannot Be Installed to This Disk' Error

Encountering the error "Windows cannot be installed to this disk. The selected disk is not of the GPT partition style" during Windows installation? This usually means your PC is in UEFI mode, but your hard drive isn't configured for it. Windows Setup requires a GPT partition style for UEFI-based PCs. Here's how to resolve this:

Solution 1: Convert MBR to GPT using the MBR2GPT tool (Data Preservation)

This method keeps your data intact.

1. Power off your PC and insert your Windows installation media (DVD or USB).
2. Power on and repeatedly press the Boot Menu key (often Esc, Delete, F1-F12) to access the One-Time Boot Menu.
3. Select your installation media and press Enter.
4. At the Windows Setup screen, press Shift F10 to open Command Prompt.
5. Validate your disk's convertibility: MBR2GPT.EXE /validate /disk:0 (Replace 0 with your disk number if needed).
6. If validation succeeds, convert the disk: MBR2GPT.EXE /convert /disk:0 (Again, adjust the disk number as necessary).
7. You might need to change your firmware to UEFI mode (see Solution 3) before restarting.

Solution 2: Convert MBR to GPT by Reformatting (Data Loss)

This method will erase all data on the selected drive.

1. Power off your PC and insert your Windows installation media.
2. Boot from the media in UEFI mode.
3. Press Shift F10 to open Command Prompt.
4. Type diskpart and press Enter.
5. Identify your drive using list disk.
6. Select the drive: select disk <disk number></disk> (e.g., select disk 0).
7. Clean the drive: clean
8. Convert to GPT: convert gpt
9. Exit: exit
10. Close Command Prompt and proceed with Windows Setup, choosing the Custom installation option.

Solution 3: Change Firmware Mode from Legacy to UEFI

This error can occur if your system is booting in Legacy BIOS mode.

1. Access your firmware settings by pressing the appropriate key during startup (often Esc, Delete, F1-F12). Check your manufacturer's website if unsure. Alternatively, if Windows is already installed, use the Advanced Startup options (Power button > Shift Restart > Troubleshoot > Advanced options > UEFI Firmware settings).
2. Locate the Boot or Security settings.
3. Disable Secure Boot (if enabled).
4. Change the Boot Mode to UEFI.
5. Save changes and exit.

Remember to back up important data before attempting any of these solutions, especially Solution 2. If you're unsure about any step, consult your computer's manual or seek professional assistance.

The above is the detailed content of Fix 'Windows Cannot Be Installed to This Disk' Error. For more information, please follow other related articles on the PHP Chinese website!