


Basic Fixes:
- Ensure the RAM is seated properly: If the RAM isn’t inserted properly in the slot or if the side clips holding the RAM didn’t click, it can prevent the RAM from being recognized by your laptop. If so, open the back panel and check again.
- Double-check the RAM type: Your Windows device might not recognize the new RAM if it’s a mismatch from the one currently available. This can also happen if the new RAM is not compatible. So, check the RAM specs for your device and ensure the upgraded RAM is a match.
- Ensure the RAM is not damaged: The new RAM might not work properly if it is damaged. This can sometimes also happen when you’re installing the RAM. So, open the back cover of your laptop, pull out the new RAM, and check.
- Restart your laptop: Temporary system bugs can cause the newly installed RAM not to show up or work properly. When this happens, restart your Windows laptop. Then, open the Task Manager and check if the RAM capacity has increased.
- Install any pending Windows updates: Regular updates can help keep your laptop up-to-date with all the bug fixes and software changes. So, if you’re experiencing issues using the newly installed RAM, check and ensure the latest Windows updates have been installed.
Fix 1: Try Adding the RAM to the Other Slot
Your Windows device might not recognize the newly installed RAM if there are issues with the RAM slot. To check if this is the case, switch the RAM slot of the previous and new RAM. Then, see if the old RAM is visible. Here’s how to do it.
Step 1: Flip your laptop and keep it on a soft surface. Carefully open all the screws using a screwdriver.
Step 2: Use a card to pop the back open.
Step 3: Remove the new RAM and old RAM. Swap their slots.
Once done, close the back and put the screws back on. Then, boot up your laptop, open Task Manager, and check if either of the RAMs is being recognized.
Fix 2: Uncheck the Max Memory Option
If your Windows device has set memory restrictions, the newly installed RAM may not show up or work properly. So, use the below steps to check and ensure this is not the case.
Step 1: Open the System Configuration app and go to the Boot tab. Click on Advanced options.
Step 2: Uncheck the Maximum memory option and click on OK.
Step 3: Click on Apply and OK to save settings and close the window.
Once done, restart Windows 11 to finish. Then, open Task Manager and check if the new RAM is visible and working.
Fix 3: Reinsert the RAM
The newly upgraded RAM must be properly inserted in the dedicated slot. If it was improperly inserted or if the side clips didn’t close, it might not work as expected. In this case, open your laptop’s back cover and remove the RAM. Reinsert it properly and check.
Fix 4: Update BIOS
If your laptop is having trouble recognizing the new RAM upon boot, updating the BIOS might help. This can also resolve any lags during device startup after installing the new RAM. To do this, enter your device’s BIOS and refer to the manufacturer’s website to update the BIOS.
If you’re repeatedly facing RAM-related issues or if your laptop is behaving erratically after the upgrade, we recommend going to the nearest service center to get your device checked.
The above is the detailed content of What to Do if Your Upgraded RAM Doesn't Show up or Work on Windows 11?. For more information, please follow other related articles on the PHP Chinese website!

Customize Your Windows 11 File Explorer: A Guide to Setting and Saving Your Preferred View Tired of File Explorer's default view? This guide shows you how to easily change and permanently save your preferred folder view in Windows 11, whether it's l

Pushing the boundaries of Linux: exploring unusual applications. Purely for fun, of course. Posts 7 Technically, you can create a WSL image for any compatible Linux distribution. However, officially supported images offer a significantly smoother e

When applications unexpectedly extend beyond your screen's edges, accessing their title bars becomes impossible. This is especially common with dual monitors but can occur on single displays as well. This guide offers solutions for regaining control

The HD-SKL, a limited-edition hard drive, is a modern take on Buffalo's 1998 Skeleton Hard Disk. The original, a 4.3GB drive with a clear acrylic case, was produced in a limited run of 500 units. While Buffalo cites its 1978 Melco 3533 turntable as

The new Surface Pro: A step back? Microsoft's latest Surface Pro offers connectivity via two USB-C ports, supporting charging, USB 3.2 data transfer, and DisplayPort 1.4a (up to two 4K monitors at 60Hz). However, the device ships without a power ad

Microsoft's latest Surface Laptop aims to rival the MacBook Air, but with some notable compromises. The absence of a Surface Connect port marks a significant departure from previous models, reflecting the growing prevalence of Thunderbolt and USB do

1. Background Recently, when using the svn plug-in to manage remote warehouse code in eclipse, prompts to enter passwords are always prompted to enter passwords, which is particularly annoying. After hard work, I finally solved the problem and shared it with you~ 2. Analysis of the password mechanism of the svn plug-in and the cause of the problem. When we use the svn plug-in for the first time and enter the password, a file that saves the password will be generated, and then the svn plug-in will read the username and password information by default every time. When eclipse is started, the configuration information will be automatically read into the program cache. After the password of svn is modified, it is impossible to log in again, and there is no prompt to re-enter the password. At this time, we can delete the relevant configuration files and let the svn plugin prompt us to re-enter the password. However, ec

The steps to start system restore in Windows 8 are: 1. Press the Windows key X to open the shortcut menu; 2. Select "Control Panel", enter "System and Security", and click "System"; 3. Select "System Protection", and click "System Restore"; 4. Enter the administrator password and select the restore point. When selecting the appropriate restore point, it is recommended to select the restore point before the problem occurs, or remember a specific date when the system is running well. During the system restore process, if you encounter "The system restore cannot be completed", you can try another restore point or use the "sfc/scannow" command to repair the system files. After restoring, you need to check the system operation status, reinstall or configure the software, and re-back up the data, and create new restore points regularly.


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Safe Exam Browser
Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.

SublimeText3 Linux new version
SublimeText3 Linux latest version

DVWA
Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software

SublimeText3 English version
Recommended: Win version, supports code prompts!

Dreamweaver Mac version
Visual web development tools
