How to set up wifi with computer?

Troubled by being unable to easily connect to Wi-Fi networks? Don’t worry, PHP editor Strawberry has provided you with a convenient guide. This guide will provide an in-depth analysis of the steps to set up a Wi-Fi network on your computer, allowing you to easily enjoy a seamless connection experience.

1. How to set up wifi with a computer?

1. First, we click on the "Start" menu, then click on "All Programs" and "Accessories" in order. After finding the "Command Prompt", right-click on "Run as Administrator".

2. Then enter "netsh wlan set hostednetwork mode=allow ssid=Test key=0123456789" in the "Command Prompt", and then hit the Enter key. (Just copy this character directly)

3. Next, we click on the network logo in the lower right corner of the computer, right-click the mouse and select "Open Network and Sharing Center" and find "Change Adapter Settings" on the left.

4. Then find "Local Area Connection" on the desktop, right-click, click "Properties", then click the "Sharing" column, then check the first option, and then click "Home Network" below Set "Connection" to "Wireless Network Connection 2", and then click OK.

5. Then also enter "netsh wlan start hostednetwork" in the command prompt and hit Enter. Finally, enter "netsh wlan stop hostednetwork" in the command prompt and click Enter to turn off the wifi hotspot.

2. How to set a wifi password on a computer?

The methods and steps to set up a wireless router and WIFI password on your computer are as follows:

(1) Use a laptop or desktop computer (smartphones are also acceptable), and then enter: 192.168.1.1 in the address bar of the browser, or 192.168.0.1, different network segments, different inputs, mainly the label behind the wireless router, but mostly the former.

3. How to set the number of people connected to wifi on the computer?

Answer: Set the number of people connected to wifi on the computer. 1. First, you need to turn on the computer you are using. After the computer enters the desktop, click the browser on the computer desktop.

2. After the browser interface appears, enter 192.168.1.1 in the address bar above the browser to jump to the router login interface.

3. Enter the user name and password in the router login interface to log in to the background, and then you can set the number of people connected to WIFI.

4. How to set up a wifi access point on the computer?

1. First, go to "Network Connection" from "Control Panel" on the computer side. 1. Open "Broadband Connection->Properties->Advanced" and change "Allow other network users to connect through this computer's Internet connection" Check the box in front of ", and if there is an option, select "Wireless Network Connection". Note: Friends who do not use broadband Internet access should set it in "Local Connection->Properties->Advanced". 2. Open "Wireless Network Connection-> ;Properties->"General" tab->Internet Protocol (TCP/IP)", select "Use the following IP address" in the pop-up Internet Protocol properties window, and set the "IP Address" to "192.168. 0.1", set the "Subnet Mask" to "255.255.255.0", leave all other input boxes empty, do not enter any characters. Then click "OK" to return to the previous level. 3. Click the second "Wireless Network" Configuration" tab -> Advanced (in the lower right corner of the page), select "Computer-to-computer only" in the third row and "Automatically connect to non-preferred networks" at the bottom, then click "Close". Return to In the "Wireless Network Configuration" tab, click the "Add" button under "Preferred Network" and customize the name you want to set in "Network Name (SSID)". Taking me as an example, I use a Samsung notebook. Just name it "SAMSUNG", then uncheck "Automatically provide me with a key", change the "Data Encryption" option to "Disabled", leave other options as default settings, and finally click "OK" to return to the previous page. class. Note: If you want to add a key (password) to your wireless network, just select "WEP" in the "Data Encryption" column, but also uncheck the "Automatically provide me with this key" item, and then Just enter the key (password) in the "Network Key" and "Confirm Network Key" boxes. [At this time, you can see "SAMSUNG (automatic)" in the "Preferred Network" dialog box. Only when this option appears It is considered successful, otherwise repeat the above operation until the option is displayed successfully.] 4. Click the third "Advanced" tab -> "Settings" under the first item Windows Firewall, select "Close", and then click "OK" Return to the previous level. [If the firewall is not turned off, "No gateway response" will be prompted when connecting to the Internet through WIFI.] 5. Finally click "OK" to exit ------ At this point, the computer side settings are completed. Under normal circumstances You can access the Internet through WIFI. 2. Operation on the mobile phone: Use 5800 to search for WLAN networks. By default, there is a shortcut "WLAN Wizard" on the desktop, or "Menu->Settings->Connection Function->Wireless LAN". Here you can search for the "network name (SSID)" you just set on the computer. I am SAMSUNG. After searching, select it and click "Start browsing the Internet" to use it! The access point must also be set: Menu->Settings->Connectivity->Bearing mode->Internet->Left-click options->New access point->Automatically search for available access points, select "Yes"[No such If you follow these steps, the access point will be displayed in "Uncategorized".] Since operators in mainland China restrict the use of WIFI, if you use WIFI to access the Internet, the operator's independent website does not support access through WIFI, for example " "Monternet". (If everyone has WIFI, those operators will make a lot less money in GPRS. This is also the reason why WIFI is removed from licensed machines. This is the so-called "policy" under BS!) So through UCWEB6 Friends who use the Internet also need to make changes in the settings of UC before they can be used. The setting steps are as follows: Run UC, menu->Settings->System Settings; there is an item in it called "Network Mode". If you have a SIM card The operator is China Mobile, and the default is "Monternet". If you change it to "Direct Internet", it will be OK~ Summary: Mobile phone settings: Some mobile phones may not be able to access the Internet, and will still prompt "No gateway response" or " "Connection timeout", then you need to further set the IP address and other information on the mobile phone. Let's take my settings as an example: Menu->Settings->Connection Function->Bearing Mode->Internet->SAMSUNG( (the name of "Network Name (SSID)" in the previous computer settings), then click the left function key--Options--Advanced Settings, select "IPV4 Settings", manually assign an IP address, etc. 1. Set the "Mobile Phone IP Address" is "192.168.0.2" (Note: The IP address here can be changed as long as it is in the same network segment as the gateway. The replacement range is between "192.168.0.2" ~ "192.168.0.254".) 2. "Subnet mask" Code" is set to "255.255.255.0" (cannot be changed!) 3. "Default Gateway" is set to "192.168.0.1" (cannot be changed! This gateway is the IP address customized when creating a new wireless network connection point on the computer. .)4. "DNS Address", set the "Primary DNS Address" to "192.168.0.1", and the "Secondary DNS Address" remains unchanged, still "0.0.0.0". 3. Solutions to common problems 1. No response from the gateway Let's take my own access point name "SAMSUNG" as an example: Menu->Settings->Connection Function->Bearing Mode->Internet->SAMSUNG->WLAN Network Mode, the default is "Special ", changed to "Basic Network

5. Why does the computer disconnect from the Internet when setting up a wifi hotspot?

Disconnection means there is a problem with the wireless network card. Just replace it with the old version. You also need to use sharing. On your laptop, whether you are using a local connection or a broadband connection, you must set up the sharing to give you this virtual hotspot.

1. Open the Windows 7 Network Sharing Center;

6. How to set up wifi wireless bridging with a computer?

1.

The first method: hardware connection: connect a network cable from the router LAN port to the computer network port

2.

Second method: Wireless connection: The computer or wireless device connects to the router wirelessly. The router's WIFI name (network name) and WIFI password (network key) are written on the router label. Note that the keys are case-sensitive.

3.

After the hardware is connected, open the browser and the following setting interface will pop up automatically; if the following interface does not pop up automatically, enter the URL on the browser address bar: 192.168.1.1

4.

This setting will pop up After the interface, click Set Up Now

5.

Click ON to turn on the relay function

6.

Click to select the wireless network to be relayed

7.

Select your main router WIFI signal

7. Laptop How to solve the problem of disconnection when setting up wifi hotspot on computer?

Open the wireless network card property settings of the WIFI hotspot, then click the "Configure" button in "Network Card Properties", switch to the "Power Management" tab in the pop-up window, and put "Allow the computer to turn off this device to save power" in front of After unchecking, the above settings are not over yet. Remember to set the power management in the properties of the local connection network card according to the above method. The reason is very simple, because the virtual WIFI hotspot is shared through the local connection. For Internet access, if the local connection is closed, naturally the WIFI hotspot will not be able to access the Internet.

8. How to set up wifi hotspot and wifi sharing on laptop?

The whole process of setting up wifi hotspot and wifi sharing on a laptop:

1. Open the Start menu - Settings - Network and internet in the control panel

2. Find the Network and Sharing Center

3. Manage wireless in the upper left corner Network, open it

4. Then go in and select Add to add a wireless network

5. Here we select "Create a temporary network"

6. Click Next in this "Manually connect to a wireless network" panel

7. Fill in the network name. Anyone can write the network name - select WEP as the security type - set the security key (that is, the password that others need to enter when they want to connect to the network) - remember to "Save this network" If you check the box, the network will be gone when the computer is turned off next time, and you will have to start over again, which will be troublesome.

8. Finally completed, it shows "xx network is ready for use" and then closes.

9. When you return to the management wireless network panel, there is an option to change the adapter settings below

10. Go in and right-click on the local connection and select Properties

11. Select the option as "Wireless Network Connection" in Sharing , then check the box "Allow other network users to control or prohibit shared Internet connections", and then click OK

12. At this point, the sharing has been set up. When other mobile phones or computers want to go online, search for the one you took. Connect to that network name and enter the password to connect to the Internet. Next, select the access point as a wireless network for every software on your phone. Anyway, this traffic is free for other devices and does not cost money. Yes, it’s a waste if you don’t use it

13. When you want to use wireless Internet in the future, remember to connect the name of your newly created network in the small computer (network) logo in the lower right corner of the computer screen first. When other users want to connect, Use your computer to search and connect to the Internet

9. How to set up a WIFI hotspot on your win7 computer so that your phone can share the Internet?

How to set up a WIFI hotspot on a win7 computer: virtual WIFI and SoftAP functions

1. Run the command prompt as an administrator: shortcut key win+R → enter cmd → press the Enter key

2. Enable and Set up the virtual WIFI network card: Run the command: netsh wlan set hostednetwork mode=allow ssid=ACE-PC key=12345678”

Press the Enter key again

3. Set up Internet connection sharing: After the command is run successfully, the network connection There will be an extra network card in "Wireless Network Link 2", rename it to virtual wifi, right-click the network connection connected to the Internet (here is CMCC-EDU), select "Properties" → "Sharing", check "Allow" Other...Connect (N)" and select "Wireless Network Link 2"

4. After confirmation, the word "Shared" will appear next to the icon of the network card that provides sharing, indicating that the "Broadband Connection" has been shared to " Virtual WIFI"

5. Turn on the wireless network: continue to run in the command prompt: netsh wlan start hostednetwork, the wifi connection is successful~

6. Every time you open it in the future, click the shortcut key win+R → enter cmd → press Enter Press Enter, paste netsh wlan start hostednetwork, and press Enter to connect to wifi.

10. After setting up a wifi hotspot with a laptop, how do you use your mobile phone to view files on your computer?

Install a file browser on your mobile phone? .

Open the "File Browser" and enter the "Local File" interface. Swipe your finger to the left, or click the computer icon above to open the "LAN" file browsing interface.

Click "Scan" below. After the scan is completed, Display the list of computer hosts shared under this wifi.

Select your computer based on the IP address of your computer just now, enter the user name and password, and enter the computer’s shared file list

The above is the detailed content of How to set up wifi with computer?. For more information, please follow other related articles on the PHP Chinese website!