How to solve the problem of blue screen when turning on the computer?

It is annoying to encounter the problem of blue screen when starting the computer. PHP editor Yuzai learned that the blue screen problem is caused by many reasons, and it is not easy to solve. In order to help everyone solve this problem, PHP editor Yuzai has compiled common blue screen solutions, including hardware troubleshooting, software conflict detection, system file repair, etc. Read on for details below to get the best solution for your specific situation and say goodbye to blue screens.

1. How to solve the blue screen when the computer starts up?

As the guy above said, this is not a blue screen, but the bios settings page. It automatically enters the bios after booting, indicating that there are no default startup options to choose from, or the hard disk is not recognized.

Solution: ①Press the direction key →, switch to the Boot panel, and set the startup item

②Press and hold F12 to select the startup item as the hard disk

③Check whether the keyboard data cable in the host is loose. Just re-reinforce it

2. A blue screen appears when the computer is turned on?

This is the reason why the computer is malfunctioning. First of all, we need to find the cause of the computer blue screen, because there are many reasons for the computer blue screen, such as excessive computer overclocking, poor memory module contact or memory damage, computer blue screen caused by hard disk failure, and incorrect installation of software. It also causes computer blue screen, etc.

3. How to set up a blue screen when the computer starts up?

This is difficult to set up. A blue screen means there is a problem with the computer program. It is best to update it again

4. When the computer starts up, a blue screen appears when launching Steam?

1. Go to the graphics card official website to download the driver of the corresponding model and install the graphics card driver.

2. Download Driver Life, you can choose the driver version to install the driver. If there is a manufacturer's version of the graphics card driver, it is recommended to install the manufacturer's version of the graphics card driver. The stable version or the public version of the graphics card driver is not installed.

3. Install various Microsoft runtime libraries at the same time and turn off the anti-virus software. 5. How to solve the blue screen when the computer is turned on?

What to do if the computer has a blue screen? Almost all users who have used computers will encounter a blue screen at startup. There are many reasons for a blue screen at startup, including hardware failures and software failures. Occasionally, bugs in the update packages officially pushed by Microsoft can cause blue screens. So how do you troubleshoot a blue screen on boot? After reading this article, you will no longer be in trouble next time you encounter a blue screen on boot. Even if you are a computer novice, you can still solve it by following my method step by step. Let’s get to the point!

　 Situation 1:

　 Ordinary fault, that is, hardware failure or software failure.

　Solution:

　　1. If you find a blue screen at startup, you may enter safe mode by quickly pressing the F8 key on the first screen of startup, select [Safe Mode] on the interface that appears on the screen, and press [Enter].

　2. If you can enter safe mode, it means there is a software conflict or system failure. At this time, you only need to reinstall the system.

　　3. If you still get a blue screen after entering safe mode, there may be a problem with the hardware. At this time, you need to open the case and check the hardware.

　　4. If there is a lot of dust when you open the case, sometimes the blue screen is caused by dust, so we first use a brush or fan to clean the dust on the case.

　5. If you still have a blue screen after clearing the dust and turning on the phone, take out the memory in the next step and use an eraser to wipe the memory of the gold phone.

　6. If the above methods still cannot solve the problem, there may be a problem with the memory itself or the hard disk. It is recommended to get it to a more professional computer repair organization for maintenance.

　 Situation 2:

　 The update patch pushed by Microsoft, after the patch is updated through the system or security software, may cause the user's computer to restart with a blue screen of 0xc0000005, 0xc0000008e, and at the same time be unable to boot, and restart repeatedly.

Temporary solution: It is recommended to press F8 during boot to enter safe mode, uninstall this patch, and restart.

Cause analysis: It is initially confirmed that some anti-virus software is related to the Windows system security update patch (KB2859537).

　Solution:

　1. When the above situation occurs, press and hold the power switch for 10 seconds to force a shutdown. After confirming the shutdown, click the switch key again to turn it on, and continuously click the F8 key on the keyboard until the advanced options menu appears. Use the direction key "↓" in the lower right corner of the keyboard to select "Safe Mode" and press "Enter", then select the current system and press "Enter";

　　2. After about 30 seconds, enter the account selection interface and select Management Log in to the system with a user account;

　 3. After entering, the system will pop up the prompt "Windows is running in safe mode", please left-click "Yes";

　 4. After entering the system's safe mode desktop, left-click " Start"--->"Control Panel"--->"Add or Remove Programs";

　5. On the Add or Remove Programs page, check "Show Updates"--->Find "KB2859537", Select "Delete";

　　6. Select "Next" in the wizard to complete the deletion. At this time, the computer will automatically restart. After waiting patiently for another 50 seconds, you can use the computer normally.

6. How to solve the problem of blue screen as soon as the computer is turned on?

The solution is as follows

1

If you find a blue screen when booting, you may enter safe mode by quickly pressing the F8 key on the first screen of booting, selecting [Safe Mode] on the interface that appears on the screen and pressing [Enter] .

2

If you can enter safe mode, it means there is a software conflict or system failure. At this time, you only need to reinstall the system.

3

If you still get a blue screen after entering safe mode, there may be a problem with the hardware. At this time, you need to open the case and check the hardware.

4

If there is a lot of dust when you open the case, sometimes the blue screen is caused by dust, so we first use a brush or fan to clean the dust on the case.

5

If you still have a blue screen after clearing the dust and turning on the phone, take out the memory in the next step and use an eraser to wipe the memory of the gold phone.

7. The CPU becomes hot as soon as the computer is turned on. A blue screen appears when the computer is turned on?

Hello friends, if the CPU gets hot as soon as you turn on the computer, and a blue screen appears when you turn on the computer, this is because the CPU fan is blocked by dust, or the fan is damaged, or the radiator may have fallen off, Jianyi turns off the power, Turn on the host, then power on, and see if the fan on the CPU is spinning. If it is not spinning, check the dust on the fan. If it still does not spin after cleaning it, the fan is broken and can be replaced. If the radiator has fallen off , will also cause this, so reinstall the radiator and your problem will be solved. I hope my answer will be helpful to you, I wish you success and happiness~~

8. A blue screen appears when you move the mouse after turning on the computer?

　Common fault, that is, hardware failure or software failure.

　Solution:

　　1. If you find a blue screen when booting, you may enter safe mode by quickly pressing the F8 key on the first screen of booting, select [Safe Mode] on the interface that appears on the screen, and press [Enter].

　2. If you can enter safe mode, it means there is a software conflict or system failure. At this time, you only need to reinstall the system.

　 3. If you still get a blue screen after entering safe mode, there may be a problem with the hardware. At this time, you need to open the case and check the hardware.

　　4. If there is a lot of dust when you open the case, sometimes the blue screen is caused by dust, so we first use a brush or fan to clean the dust on the case.

　5. If you still have a blue screen after clearing the dust and turning on the phone, take out the memory in the next step and use an eraser to wipe the memory of the gold phone.

　6. If the above methods still cannot solve the problem, there may be a problem with the memory itself or the hard disk. It is recommended to get it to a more professional computer repair organization for maintenance.

9. The computer has a blue screen when it starts up, and then restarts after a flash?

Solution 1 for computer blue screen automatic restart: The computer voltage is unstable

The switch power supply range of general household computer cases is 170V-240V. When the voltage is too low, lower than 170V, the computer will automatically restart or shut down.

Solution: If the voltage in the home is often unstable, then we can purchase a UPS power supply or a 130V-260V wide switching power supply to ensure the stable operation of the computer.

　 Computer blue screen automatically restarts solution 2: The quality of the power strip or socket is very poor, resulting in poor contact

　 I believe everyone should have encountered this problem. We can use other sockets to check whether it is because of the socket. problem caused.

Solution: Replace the power strip or socket with a better quality one to stabilize it, so that the computer will not automatically restart.

　 Computer blue screen automatic restart solution three: The computer power supply has insufficient power or poor performance

This situation is also relatively common, especially for some computers that are configured by themselves, or some hardware of the computer is replaced later, such as: After replacing a high-end graphics card, etc., when running some large memory, the power supply protection will stop the output due to insufficient instantaneous power supply. However, when the power supply stops output, the load is reduced, and the power supply starts again. Because the recovery time after protection is very short, the performance given to us is that the host automatically restarts.

Solution: Change to a high-quality, high-power computer power supply.

　 Computer blue screen automatic restart solution four: CPU problem

　 When some internal functional circuits of the CPU are damaged and the second-level cache is damaged, the computer can still start, and even enter the normal desktop for normal operations, but when a certain special function is performed It will restart or freeze when the computer is running, such as drawing a table, playing VCD, playing games, etc.

Solution: Try to block the second-level cache (L2) or first-level cache (L1) in CMOS to see if the host can run normally; otherwise, just replace it with a good CPU to eliminate the problem

Solution to automatic restart of computer blue screen Five: Memory problem

If your memory is not large enough, then when running some large games or software and the memory is too large, the computer will restart and automatically close the game or software.

　 Computer blue screen automatic restart solution 6: Poor heat dissipation

Poor heat dissipation causes the temperature of CPU and other hardware to be too high, and the computer will also restart. In this way, we must check whether the fan is normal and clean all the dust in the case. clean.

Computer blue screen automatically restarts solution 7: Strong magnetic interference

　　不要小看電磁幹擾，許多時候我們的電腦死機和重啟也是因為幹擾造成的，這些幹擾既有來自機殼內部CPU風扇、機殼風扇、顯示卡風扇、顯示卡、主機板、硬碟的干擾，也有來自外部的動力線， 變頻空調甚至汽車等大型設備的干擾。如果我們主機的干擾效能差或屏蔽不良，就會出現主機意外重新啟動或頻繁當機的現象。

十、電腦一開機就藍屏，怎麼辦？

1.

進入安全模式輸入指令修復電腦藍色畫面：

1、先將電腦關機後重新開機，在開機時候不斷按F8進入

2.

2、選擇安全模式，回車進入，進入安全模式後

3.

3、按win+r打開運行窗口，輸入cmd，回車，在命令提示窗口

4.

4、輸入chkdsk/f/r，回車，然後按y，退出頁

5.

5、重新啟動電腦，系統會自動修復硬碟，一般就可以恢復

The above is the detailed content of How to solve the problem of blue screen when turning on the computer?. For more information, please follow other related articles on the PHP Chinese website!