Computer sleep mode?

Troubled by various problems caused by computer sleep mode? PHP editor Yuzai brings you an exclusive analysis and fully reveals the secrets of sleep mode. Explain in simple terms, analyze the principles, and provide you with effective ways to solve problems. Come find out and let your computer hibernate worry-free!

1. Computer sleep mode?

1. Press the power button to turn on the computer that needs to be set to sleep mode.

2. After booting, click the Start menu in the lower left corner of the computer desktop.

3. After entering the start menu, click the triangle expansion button on the right side of the shutdown option.

4. Select the sleep button under the extension order to put the computer into sleep mode.

2. How to turn on the computer after hibernation?

1. Next, we need to press the power button to turn on the computer again. This time we need to turn off the sleep function. After turning on the computer, right-click the computer and click.

2. Then click on the left side of the computer’s properties interface.

3. Open the control panel, find the function and click to open it.

4. We need to find and click to open the option in the system and security interface.

5. Then find it and click the drop-down arrow at the back of the time selection.

6. We need to set this to and then click, so that the computer will not go to sleep in the future, and the screen will not be turned on.

3. The computer is in hibernation, how to turn it on?

1. Press the power button to turn on the computer that needs to be set to sleep mode.

2. After turning on the computer, click the Start menu in the lower left corner of the computer desktop.

3. After entering the start menu, click the triangle expansion button on the right side of the shutdown option.

4. Select the sleep button under the extension order to put the computer into sleep mode. Extended information: The purpose of turning on hibernation mode: Although computer hardware is running faster and faster, the size of the operating system is also expanding, causing more and more programs to be started and closed when the computer is turned on and off, and it takes more time. It’s getting longer and longer. Therefore, how to make the computer start up quickly and enter Windows as soon as it is turned on has become a concern for users. Therefore, with the upgrade of hardware and software, the operating system began to introduce advanced power management. Its function is to turn off some devices when the computer is idle and put the computer into a waiting state. This way, when you need to use the computer again, you can directly switch from waiting to resting. The state is restored to the original working state as soon as possible, which has an effect similar to a quick start; at the same time, it can also save power when the computer is not in use.

4. Can’t wake up the computer from sleep mode?

Maybe it’s caused by system settings.

It may be that the system firmware does not support this function.

　Solution

　1. Check whether the computer supports this function!

Check method: click "Start" - "Run"; then enter "CMD", then click OK, then enter "powercfg -a" in the command window, Remember - there is a space in front; press "Enter" when finished; the result shows Standby (S3); it means that your machine supports the sleep function. If it is not supported, you need to contact the computer manufacturer to upgrade Blos.

　2. System setting solution:

Many times it is because this function is not turned on. First right-click My Computer, then select Manage, then open "Device Manager" - "Mouse and other pointing devices". Then right-click and select Properties. Then switch to "Power Management" and tick the box.

5. How to start the computer from sleep mode?

Computer hibernation is an energy-saving mode that can sleep and start in the following ways:

Hibernation: In Windows, click "Start", select "Power", and then select "Hibernate". Or close the laptop lid, and the desktop computer will enter hibernation according to the settings.

Start up: Press the computer power button, or click any key on the keyboard, and the computer will resume from hibernation. Wait a moment for the system to reload and return to the state it was in before you hibernated it.

Hibernation saves the computer process to the hard drive and turns off the power, so it starts up relatively quickly, but it does not maintain real-time updates like standby.

6. Why can’t the computer sleep?

This is related to the power settings. Change the BIOS to automatically prevent hibernation. It is the automatic protection of the computer. It is best to clear the CMOS, discharge the motherboard, and set the motherboard BIOS to safe boot mode.

1. Set the BIOS correctly if you If your computer is connected to the network or a USB device, incorrect BIOS settings may cause it to fail to shut down properly. Generally speaking, old motherboards are prone to this kind of failure. Just disable the network wake-up and USB wake-up options in the BIOS.

2. Set up power management Shutdown is closely related to power management. Sometimes incorrect settings of power management options can cause shutdown failure. Click "Start → Settings → Control Panel → Power Options", in the pop-up window, enable or cancel "Advanced Power Support" as needed (if you were using "Advanced Power Support" when the fault occurred, try to cancel (or enable it otherwise), this method in Windows 98 can often solve most shutdown problems caused by power management

7. Does computer hibernation consume power?

The power consumption of the computer when sleeping is very low.

Because when the computer is in hibernation, the hard drive does not spin, the monitor is in hibernation, and the CPU works at low power, so the power consumption is only about half.

8. How to cancel computer hibernation?

Use the following steps to cancel computer hibernation

1. Click Hardware and Sound

to enter the Windows computer control panel page, and click the option inside.

2. Click Power Options

After opening the Hardware and Sound page, click inside.

3. Click on the monitor time

In the power options page, click on the

on the left 4. Click on Never

to enter the new page and select in the options.

5. Click to save changes

After the settings are completed, click below.

9. How to wake up the computer from sleep mode?

The ways to wake up a sleeping computer are as follows:

1. Press any key on the keyboard or move the mouse. These methods are used to wake up a sleeping computer; if you need to leave the computer for a short time during work, you can use the sleep function. On the one hand, it can save power, and on the other hand, it can quickly resume work;

2. If there is no response when pressing the keyboard or moving the mouse, then your computer may have entered a sleep state. At this time, you need to press the power button to Wake up the computer; computer hibernation refers to saving the currently running data in the hard disk, and the entire machine will completely stop power supply.

You can completely disconnect the computer from the power supply during hibernation, and set the appropriate time to automatically turn off the monitor and hard drive depending on your needs.

10. How to wake up the computer from sleep mode?

1.

You can move the mouse slightly to enter the computer, because it is still running in sleep mode by default and is not shut down

2.

You can also press the power button, and then it will Enter the running desktop from sleep mode. Usually sleep mode is just a power-saving method for the host. It does not shut down the host. It just enters sleep mode if the host is not operated for a long time

3.

You can also press ctrl alt+shift

4.

and then click Log out

5.

Press the power button to turn on the phone

The above is the detailed content of Computer sleep mode?. For more information, please follow other related articles on the PHP Chinese website!